Abstract
Predicting the life of blanking punch is one of the major concerns in designing compound dies. Finite element analysis is performed to determine the maximum and minimum principal stresses through which fatigue limit of punch is estimated. The factors affecting the life of punch are examined and a mathematical model is established using artificial neural network (ANN) and adaptive neuro fuzzy inference systems (ANFIS). The developed model is utilized to evaluate the life of punch for varied load conditions. Comparative evaluation of ANN and ANFIS results suggested that the later model is superior in predicting the life of punch and it can be effectively utilized in machine tool applications.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Di, S., Thomson, P.F.: Neural network approach for prediction of wrinkling limit in square metal sheet under diagonal tension. J. Test. Eval. 25, 74–81 (1997)
Greska, W., Franke, V., Geiger, M.: Classification problems in manufacturing of sheet metal parts. Comput. Ind. 33, 17–30 (1997)
Inamdar, M.V., Date, P.P., Desai, U.B.: Studies on the prediction of springback in air vee bending of metallic sheets using an artificial neural network. J. Mater. Process. Technol. 108, 45–54 (2000)
Djurisic, Z., Manic, M.: Intelligent nesting system. Yugosl. J. Oper. Res. 13, 229–243 (2003)
Yilbas, B., Karatas, C., Keles, O., Uslan, I., Usta, Y., Ahsan, M., Yilbas, Z.: Laser cutting of corners: assessment of cutting quality. Lasers Eng. 16, 157–171 (2006)
Crina, A.: Control the springback of metal sheets by using an artificial neural network. In: 10th Esaform Conference on Material Forming, Zaragoza Spain (2006)
De, B., Klingenberg, W.: Architecture for a neural expert system for condition-based maintenance of blanking. Int. J. Mater. Prod. Technol. 32, 447–459 (2008)
Veera Babu, K., Ganesh Narayanan, R., Saravana Kumar, C.: An expert system for predicting the deep drawing behavior of tailor welded blanks. Expert Syst. Appl. 37, 7802–7812 (2010)
Yeh, F., Li, C., Tsay, K.: Application of adaptive network fuzzy inference system to die shape optimal design in sheet metal bending process. J. Appl. Sci. Eng. 15, 31–40 (2012)
Lin, B., Huang, K., Kuo, C.: An adaptive-network-based fuzzy inference system for predicting springback of U-Bending. Appl. Mech. Mater. 284–287, 25–30 (2013)
Ashhab, M., Breitsprecher, T., Wartzack, S.: Neural network based modeling and optimization of deep drawing—extrusion combined process. J. Intell. Manuf. 25, 77–84 (2014)
Kashid, S., Kumar, S.: Prediction of life of compound die using artificial neural network (ANN). Key Eng. Mater. 622–623, 664–671 (2014)
Kashid, S., Kumar, S.: Prediction of life of die block using artificial neural network. Appl. Mech. Mater. 592–594, 689–693 (2014)
Liu, N., Yang, H., Li, H., Yan, S., Zhang, H., Tang, W.: BP artificial neural network modeling for accurate radius prediction and application in incremental in-plane bending. Int. J. Adv. Manuf. Technol. 80, 971–984 (2015)
Kashid, S., Kumar, S., Hussein, H.M.A.: Key Eng. Mater. 639, 501–508 (2015)
Zhou, S., Chen, Y., Zhang, D., Xie, J., Zhou, Y.: Classification of surface defects on steel sheet using convolutional neural networks. Mater. Technol. 51, 123–131 (2016)
Yaghoobi, A., Bakhshi-Jooybari, M., Gorji, A., Baseri, H.: Application of adaptive neuro fuzzy inference system and genetic algorithm for pressure path optimization in sheet hydroforming process. Int. J. Adv. Manuf. Technol. 86, 2667–2677 (2016)
Wang, Z., Yang, B., Kang, Y., Yang, Y.: Development of a prediction model based on RBF neural network for sheet metal fixture locating layout design and optimization. Comput. Intell. Neurosci. (2016). https://doi.org/10.1155/2016/7620438
Panthi, S., Hora, M., Ahmed, M.: Artificial neural network and experimental study of effect of velocity on springback in straight flanging process. Indian J. Eng. Mater. Sci. 23, 159–164 (2016)
Naranje, V., Kumar, S., Kashid, S., Ghodke, A., Hussein, H.M.A.: Prediction of life of deep drawing die using artificial neural network. Adv. Mater. Process. Technol. 2, 132–142 (2016)
Dilan, R., Balkan, T., Platin, B.: An online intelligent algorithm pipeline for the elimination of springback effect during sheet metal bending. Procedia Eng. 207, 1576–1581 (2017)
Aleyasin, H.: The prediction of forming limit diagram of low carbon steel sheets using adaptive fuzzy inference system identifier. J. Solid Mech. 9, 472–489 (2017)
Mekras, N.: Using artificial neural networks to model aluminum based sheet forming processes and tools details. J. Phys. (2017). https://doi.org/10.1088/1742-6596/896/1/012090
Kannadasan, S., Senthil Kumar, A., Pandivelan, C., Sathiya Narayanan, C.: Modelling the forming limit diagram for aluminium alloy sheets using ANN and ANFIS. Appl. Math. Inf. Sci. 11, 1435–1442 (2017)
Kazymyrovych, V.: Very high cycle fatigue of tool steels. Faculty of Technology and Science Materials Engineering, Karlstad University Studies, Karlstad, Sweden (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Salunkhe, S., Rajamani, D., Balasubramanian, E. (2019). Comparison of Artificial Neural Network and Adaptive Neuro Fuzzy Inference Systems for Predicting the Life of Blanking Punch. In: Silva, L. (eds) Materials Design and Applications II. Advanced Structured Materials, vol 98. Springer, Cham. https://doi.org/10.1007/978-3-030-02257-0_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-02257-0_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-02256-3
Online ISBN: 978-3-030-02257-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)