Abstract
Different aspects of surface measurement strategies on Coordinate Measuring Machine (CMM) were varied and their influence on the flatness deviation result was investigated. The CMM measurements were conducted using single point and continuous scanning probing. The measurements were performed with five different point densities in rectangular grid sampling strategies and three different probe styli. The results showed a very significant influence of a sampling size on a flatness deviation measurement result.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pereira, P.H.: Cartesian coordinate measuring machines. In: Coordinate Measuring Machines and Systems, 2nd edn., pp. 57–79. CRC Press, Boca Raton (2012)
Flack, D.: CMM Measurement Strategies, Measurement Good Practice Guide 41. National Physical Laboratory (2014)
Raghunandan, R., Rao, P.V.: Selection of sampling points for accurate evaluation of flatness error using coordinate measuring machine. J. Mater. Process. Technol. 202(1–3), 240–245 (2008)
Raghunandan, R., Rao, P.V.: Selection of an optimum sample size for flatness error estimation while using coordinate measuring machine. Int. J. Mach. Tools Manuf. 47(3–4), 477–482 (2007)
Lakota, S., Görög, A.: Flatness measurement by multi-point methods and by scanning methods. AD ALTA J. Interdiscip. Res. 1(1), 124–127 (2011)
Jalid, A., Hariri, S., Laghzale, N.E.: Influence of sample size on flatness estimation and uncertainty in three-dimensional measurement. Int. J. Metrol. Qual. Eng. 6(1), 102 (2015)
Capello, E., Semeraro, Q.: The harmonic fitting method for the assessment of the substitute geometry estimate error. Part I: 2D and 3D theory. Int. J. Mach. Tools Manuf. 41(8), 1071–1102 (2001)
Capello, E., Semeraro, Q.: The harmonic fitting method for the assessment of the substitute geometry estimate error. Part II: statistical approach, machining process analysis and inspection plan optimization. Int. J. Mach. Tools Manuf. 41(8), 1103–1129 (2001)
Henke, R.P., Summerhays, K.D., Baldwin, J.M., Cassou, R.M., Brown, C.W.: Methods for evaluation of systematic geometric deviations in machined parts and their relationships to process variables. Precis. Eng. 23(4), 273–292 (1999)
Summerhays, K.D., Henke, R.P., Baldwin, J.M., Cassou, R.M., Brown, C.W.: Optimizing discrete point sample patterns and measurement data analysis on internal cylindrical surfaces with systematic form deviations. Precis. Eng. 26(1), 105–121 (2002)
Colosimo, B.M., Moya, E.G., Moroni, G., Petro, S.: Statistical sampling strategies for geometric tolerance inspection by CMM. Econ. Qual. Control 23(1), 109–121 (2008)
Zaimovic-Uzunovic, N., Lemes, S.: Cylindricity Measurement on a Coordinate Measuring Machine. Advances in Manufacturing, pp. 825–835. Springer, Cham (2018)
Weckenmann, A., Estler, T., Peggs, G., McMurtry, D.: Probing systems in dimensional metrology. CIRP Ann. Manuf. Technol. 53(2), 657–684 (2004)
International Organization for Standardization, ISO 1101:2017: Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (2017)
International Organization for Standardization, ISO 12781-2:2011: Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (2011)
Shakarji, C.M.: Coordinate measuring systems algorithms and filters. In: Coordinate Measuring Machines and Systems, 2nd edn., pp. 153–182. CRC Press, Boca Raton (2012)
Strbac, B., Hadzistevic, M., Klobucar, R., Acko, B.: The effect of sampling strategy on the equation of a reference plane measured on a CMM. In: Proceedings of 10th Research/Expert Conference with International Participation, QUALITY 2017, Neum, Bosnia and Herzegovina (2017)
ZEISS, ZEISS CONTURA: The Reference Machine in the Compact Class. https://www.zeiss.com/metrology/products/systems/bridge-type-cmms/contura.html. Accessed 27 Oct 2018
ZEISS, STYLI. https://world.probes.zeiss.com/en/Styli/category-12.html. Accessed 20 Jan 2019
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Zaimovic-Uzunovic, N., Lemes, S., Tomasevic, D., Kacmarcik, J. (2020). Flatness Measurement on a Coordinate Measuring Machine. In: Karabegović, I. (eds) New Technologies, Development and Application II. NT 2019. Lecture Notes in Networks and Systems, vol 76. Springer, Cham. https://doi.org/10.1007/978-3-030-18072-0_19
Download citation
DOI: https://doi.org/10.1007/978-3-030-18072-0_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-18071-3
Online ISBN: 978-3-030-18072-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)