Abstract
Materials for aerospace industry such as aluminium alloys are of prime use in a variety of components. Performance and reliability of these components and structures mostly lie down on the fatigue resistance among other structural characteristics. Shot peening processing is widely employed to improve the fatigue properties. However, proper selection and control of peening factors (parameters) is needed to ensure that peening effects became beneficial rather than detrimental. The present study focuses on finding optimal peening parameters by considering multiple performance characteristics using grey fuzzy methodology. Adaptive neuro-fuzzy inference system (ANFIS) approach was used to investigate the effects of the input parameters, namely, shot type, coverage and incidence angle on the performance parameters, i.e. residual stresses, work hardening and stress concentrations. A confirmation test in terms of fatigue resistance was also carried out to validate the results from which and improvement was obtained.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wagner, L.: Response of light alloys to shot peening: comparison of magnesium and aluminium alloy. Met. Finish. News 3, 12–13 (2002)
Mylonas, G.I., Labeas, G.: Numerical modelling of shot peening process and corresponding products: residual stress, surface roughness and cold work prediction. Surf. Coat. Technol. 205(19), 4480–4494 (2011)
George, P.M., Pillai, N., Shah, N.: Optimization of shot peening parameters using Taguchi technique. J. Mater. Process. Technol. 153–154, 925–930 (2004)
Evans, R.W.: Shot peening process: modelling, verification, and optimisation. Mater. Sci. Technol. 18(8), 831–839 (2002)
Khany, S.E., et al.: An experimental study of the effect of shot peening on the low carbon steel and identification of optimal process parameters. Mater. Today Proc. 2(4), 3363–3370 (2015)
Nam, Y.-S., et al.: Use of response surface methodology for shot peening process optimization of an aircraft structural part. Int. J. Adv. Manuf. Technol. 87(9), 2967–2981 (2016)
Mahagaonkar, S.B., Brahmankar, P.K., Seemikeri, C.Y.: Effect on fatigue performance of shot peened components: an analysis using DOE technique. Int. J. Fatigue 31(4), 693–702 (2009)
Rodopoulos, C.A., et al.: Optimisation of the fatigue resistance of 2024-T351 aluminium alloys by controlled shot peening—methodology, results and analysis. Int. J. Fatigue 26(8), 849–856 (2004)
Fowlkes, W., Creveling, M.: Clyde, Engineering Methods for Robust Product Design: Using Taguchi Methods in Technology and Product Development. Addison Wesley Longman, Inc., Boston (1995)
Bagherifard, S., Ghelichi, R., Guagliano, M.: Numerical and experimental analysis of surface roughness generated by shot peening. Appl. Surf. Sci. 258(18), 6831–6840 (2012)
Unal, O.: Optimization of shot peening parameters by response surface methodology. Surf. Coat. Technol. 305, 99–109 (2016)
Sun, L.-X., Li, M.-Q., Li, H.-M.: Prediction model for surface layer microhardness of processed TC17 via high energy shot peening. Trans. Nonferrous Metals Soc. China 27(9), 1956–1963 (2017)
Karataş, C., Sozen, A., Dulek, E.: Modelling of residual stresses in the shot peened material C-1020 by artificial neural network. Expert Syst. Appl. 36(2), 3514–3521 (2009)
Zadeh, L.A.: Fuzzy sets. Inf. Control 8(3), 338–353 (1965)
Sugeno, M., Kang, G.T.: Structure identification of fuzzy model. Fuzzy Sets Syst. 28(1), 15–33 (1988)
Chang, T.C., Lin, S.J.: Grey relation analysis of carbon dioxide emissions from industrial production and energy uses in Taiwan. J. Environ. Manag. 56(4), 247–257 (1999)
Jang, J.-S.R.: ANFIS: adaptive-network-based fuzzy inference system. IEEE Trans. Syst. Man Cybern. 23(3), 665–685 (1993)
Jang, J.-S.R., Sun, C.-T., Mizutani, E.: Neuro-Fuzzy and Soft Computing: A Computational Approach to Learning and Machine Intelligence. Prentice-Hall Inc., USA (1997)
Jang, J.R., Chuen-Tsai, S.: Neuro-fuzzy modeling and control. Proc. IEEE 83(3), 378–406 (1995)
Sugeno, T.T.A.M.: Derivation of fuzzy control rules from human operator’s control action. In: Proceedings of IFAC Symposium Fuzzy Information, Knowledge Representation and Decision Analysis (1983)
Acknowledgements
The authors would like to thank the Secretary of Public Education of Mexico/TecNM for the financial support. The University of Sheffield, U.K., for offering facilities to implement the project is also gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Solis-Cordova, J., Roblero-Aguilar, S., Almanza-Ortega, N., Solis-Romero, J. (2019). Grey-Fuzzy Approach to Support the Optimisation of the Shot Peening Process. In: Martínez-Villaseñor, L., Batyrshin, I., Marín-Hernández, A. (eds) Advances in Soft Computing. MICAI 2019. Lecture Notes in Computer Science(), vol 11835. Springer, Cham. https://doi.org/10.1007/978-3-030-33749-0_30
Download citation
DOI: https://doi.org/10.1007/978-3-030-33749-0_30
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-33748-3
Online ISBN: 978-3-030-33749-0
eBook Packages: Computer ScienceComputer Science (R0)