Abstract
Materials used in additive manufacturing provide several advantages due to their versatility and availability as inputs but also have a certain degree of uncertainty in their applications to the industry. One of the research fields complementary to this type of materials relates to the adhesives used to attach different components of an assembly whose dimensions are defined by a machine. Clinics and laboratories in the dental sector are trying to adopt CAD-CAM techniques, including 3D printers and numerical control machines, as milling devices. Usually, dentists must face long waiting periods until the laboratory provides suitable and implantable dental pieces, which would be significantly shortened if the additive manufacturing is applied, as it will allow the professional to provide customized solutions and reduce the wait time. In this work, a case-control comparison on adhesives was performed, considering both those commonly used in medicine and others more oriented to the non-medical industry and using samples as classic implant-prosthetic sets. The dental crowns used in restorative dentistry that are part of the assemblies were digitized with hand scanners, modeled and edited on 3D meshes and, finally, printed on a medium-sized 3D printer. The results obtained in tensile tests showed the suitability of alternative commercial adhesive products in biocompatible materials that are commonly used in additive manufacturing, such as ULTEMTM 1010 or Polycarbonate.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
DeGrange, M., Francois-Roulet, J.: Minimally Invasive Restorations with Bonding, Quintessen. Quintessence Publishing, Chicago (1997)
Sakr, O.M.: Microshear bond strength of bioactive restorative materials to dentin, vol. 6, no. 4, pp. 90–94 (2018)
De Munck, M., Van Landuyt, K., Peumans, M., Poitevin, A., Lambrechts, P., Braem, M., Van Beerbeek, B.: A critical review of the durability of adhesion to tooth tissue: methods and results. J. Dent. Res. 84(2), 118–132 (2005)
Cadenaro, M., Maravic, T., Comba, A., Mazzoni, A., Fanfoni, L., Hilton, T., Ferracane, J., Breschi, L.: The role of polymerization in adhesive dentistry. Dent. Mater. 35(1), e1–e22 (2018)
Salou, L., Hoornaert, A., Louarn, G., Layrolle, P.: Enhanced osseointegration of titanium implants with nanostructured surfaces: an experimental study in rabbits. Acta Biomater. 11, 494–502 (2015)
Van Landuyt, K.L., Snauwaert, J., De Munck, J., Peumans, M., Coutinho, E., Suzuki, K., Yoshida, Y., Lambrechts, P., Van Meerbeek, B.: Systematic review of the chemical composition of contemporary dental adhesives, vol. 28, pp. 3757–3785 (2007)
Cadenaro, M., Antoniolli, F., Sauro, S., Tay, F.R., Di Lenarda, R., Prati, C., Biasotto, M., Contardo, L., Breschi, L.: Degree of conversion and permeability of dental adhesives. Eur. J. Oral Sci. 113(6), 525–530 (2005)
Yoshida, Y., Inoue, S.: Chemical analyses in dental adhesive technology. JDSR 48(2), 141–152 (2012)
Dentária, M., Sezinando, A.: Looking for the ideal adhesive – a review. Rev. Port. Estomatol. Med. Dentária e Cir. Maxilofac. 55(4), 194–206 (2014)
Pinés-Hueso, J., Alvarez-Arenal, A., Gonzalez-Gonzalez, I.: The effect of compressive cyclic loading on the retention of cast single crowns cemented to implant abutments. Int. J. Prosthodont. 29(1), 80–82 (2016)
Lumpe, T.S., Mueller, J., Shea, K.: Tensile properties of multi-material interfaces in 3D printed parts. Mater. Des. 162, 1–9 (2019)
Yang, Y., Li, L., Zhao, J.: Mechanical property modeling of photosensitive liquid resin in stereolithography additive manufacturing: bridging degree of cure with tensile strength and hardness. Mater. Des. 162, 418–428 (2019)
Clark, E.A., Alexander, M.R., Irvine, D.J., Roberts, C.J., Wallace, M.J., Sharpe, S., Yoo, J., Hague, R.J.M., Tuck, C.J., Wildman, R.D.: 3D printing of tablets using inkjet with UV photoinitiation. Int. J. Pharm. 529(1–2), 523–530 (2017)
Yilmaz, N.: Luting agent effectiveness on implant crown retention, vol. 2, no. April, pp. 7–11 (2011)
Wu, H., Sulkis, M., Driver, J., Saade-castillo, A., Thompson, A., Koo, J.H.: Multi-functional ULTEM TM 1010 composite filaments for additive manufacturing using Fused Filament Fabrication (FFF). Addit. Manuf. 24(August), 298–306 (2018)
Roschli, A., Gaul, K.T., Boulger, A.M., Post, B.K., Chesser, P.C., Love, L.J., Blue, F., Borish, M.: Designing for big area additive manufacturing. Addit. Manuf. 25(November 2018), 275–285 (2019)
Acknowledgements
- This work was partially funded by the project PI-0013-2017 (Call ITI Cádiz 2017 - R & D Projects). Progress and Health Foundation. Consejería de Salud y Familias. Junta de Andalucía.
- Authors wish to thank the Henkel group for products supply.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Suffo, M., Vilches-Pérez, J.I., Salido-Peracaula, M. (2020). Comparative Analysis of the Adhesion of Metallic Inserts on Dental Implants-Prosthetic Assembly Generated by Polymeric Materials Used for Additive Manufacturing. In: Cavas-Martínez, F., Sanz-Adan, F., Morer Camo, P., Lostado Lorza, R., Santamaría Peña, J. (eds) Advances in Design Engineering. INGEGRAF 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-41200-5_27
Download citation
DOI: https://doi.org/10.1007/978-3-030-41200-5_27
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-41199-2
Online ISBN: 978-3-030-41200-5
eBook Packages: EngineeringEngineering (R0)