Abstract
The development of modern cement and concrete industry calls for the improvement of the durability. By addition of a small amount of nano-particles nano structure of cement based materials can be modified and a higher durability can be achieved. In this paper, a review of the investigation of the effect of the frequently used nanoparticles, i.e., nano-silica, nano-clay and carbon nanotube on the durability of cement and concrete is presented. It is concluded that nanomodification of cementitious materials with nano-particle would make them durable through alteration of the physicochemical properties of the binder. Although intensive study on the usage of nano-silica has been conducted, more work is needed to get a better knowledge on the influencing mechanism. Surface-treatment of cementitous materials with nano-particles shows great potential for acquiring a durable concrete surface, and study on the selection of the treatment agent and treatment technique has been suggested. In addition, potential of using nano-clay in decreasing the transport property and the effect of carbon nanotube in optimizing the microstructure, as well as in decreasing the volume instability of cement-based materials are also discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yu, R., Spiesz, P., & Brouwers, H. (2014). Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount. Construction and Building Materials, 65, 140–150.
Shekari, A., & Razzaghi, M. (2011). Influence of nano particles on durability and mechanical properties of high performance concrete. Procedia Engineering, 14, 3036–3041.
Hou, P., Wang, K., Qian, J., et al. (2012). Effects of colloidal nanoSiO2 on fly ash hydration. Cement and Concrete Composites, 34, 1095–1103.
Sánchez, M., Alonso, M., & González, R. (2014). Preliminary attempt of hardened mortar sealing by colloidal nanosilica migration. Construction and Building Materials, 66, 306–312.
Singh, L., Karade, S., Bhattacharyya, S., et al. (2013). Beneficial role of nanosilica in cement based materials – A review. Construction and Building Materials, 47, 1069–1077.
Gaitero, J., Campillo, I., & Guerrero, A. (2008). Reduction of the calcium leaching rate of cement paste by addition of silica nanoparticles. Cement and Concrete Research, 38, 1112–1118.
Hou, P., Cheng, X., Qian, J., et al. (2014). Effects and mechanisms of surface treatment of hardened cement-based materials with colloidal nanoSiO2 and its precursor. Construction and Building Materials, 53, 66–73.
Hou, P., Cheng, X., Qian, J., et al. (2014). Characteristics of surface-treatment of nano-SiO2 on the transport properties of hardened cement pastes with different water-to-cement ratios. Cement and Concrete Composites, 55, 26–33.
Sanchez, F., & Sobolev, K. (2010). Nanotechnology in concrete – A review. Construction and Building Materials, 24, 2060–2071.
Kim, K., Heo, Y., Kang, S., et al. (2014). Effect of sodium silicate- and ethyl silicate-based nano-silica on pore structure of cement composites. Cement and Concrete Composites, 49, 84–91.
Kong, D., & Shah, S. (2012). Effect of nano-silica agglomeration on hydration and hardening of cement. Chinese Ceramic Society, 40, 1599–1606.
Singh, L., Bhattacharyya, S., Shah S., et al. (2015). Studies on early stage hydration of tricalcium silicate incorporating silica nanoparticles: Part I. Construction and Building Materials, 74, 278–286.
Hou, P., Kawashima, S., Wang, K., et al. (2013). Effects of colloidal nanosilica on rheological and mechanical properties of fly ash–cement mortar. Cement and Concrete Composites, 35, 12–22.
Hou, P., Kawashima, S., Kong, D., et al. (2013). Modification effects of colloidal nanoSiO2 on cement hydration and its gel property. Composites Part B: Engineering, 45, 440–448.
Shaikh, F., Supit, S., & Sarker, P. (2014). A study on the effect of nano silica on compressive strength of high volume fly ash mortars and concretes. Materials and Design, 60, 433–442.
Zhang, M., Islam, J., & Peethamparan, S. (2012). Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag. Cement and Concrete Composites, 34, 650–662.
Zhang, M., & Islam, J. (2012). Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag. Construction and Building Materials, 29, 573–580.
Li, G. (2004). Properties of high-volume fly ash concrete incorporating nano-SiO2. Cement and Concrete Research, 34, 1043–1049.
Mondal, P. (2010). Nanomechanical properties of cementitious materials. Ph.D Thesis, Northwestern University, Evanston, USA.
Bosque, S., Martin-Pastor, M., Martínez-Ramírez, S., et al. (2013). Effect of temperature on C3S and C3S + nanosilica hydration and C-S-H structure. American Ceramic Society, 96, 957–965.
Hou, P., Cheng, X., Qian, J., et al. (2015). Effects of the pozzolanic reactivity of nanoSiO2 on cement-based materials. Cement and Concrete Composites, 55, 250–258.
Thomas, J., Jennings, H., & Chen, J. (2009). Influence of nucleation seeding on the hydration mechanisms of tricalcium silicate and cement. Physical Chemistry, 113, 4327–4334.
Franzoni, E., Pigino, B., & Pistolesi, C. (2013). Ethyl silicate for surface protection of concrete: Performance in comparison with other inorganic surface treatments. Cement and Concrete Composites, 44, 69–76.
Cardenas, H., & Struble, L. (2006). Electrokinetic nanoparticle treatment of hardened cement paste for reduction of permeability. Journal of Materials in Civil Engineering, 18, 554–560.
Cardenas, H. (2012). Nanomaterials in concrete: Advances in protection, repair, and upgrade. Lancaster: DEStech Publications.
Pigino, B., Leemann, A., Franzoni, E., et al. (2012). Ethyl silicate for surface treatment of concrete – Part II: Characteristics and performance. Cement and Concrete Composites, 34, 313–321.
Pengkun Hou, Yamei Cai, Xin Cheng, et al. In-situ Ca(OH)2 consumption of TEOS and its influences on the calcium-leaching resistivity of hardened cement-based materials. Paper submitted to Cement and Concrete Composites for review.
Fan, Y., Zhang, S., Kawashima, S., et al. (2014). Influence of kaolinite clay on the chloride diffusion property of cement-based materials. Cement and Concrete Composites, 45, 117–124.
Konsta-Gdoutos, M., Metaxa, Z., & Shah, P. (2010). Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites. Cement and Concrete Composites, 32, 110–115.
Li, G., Wang, P., & Zhao, X. (2007). Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites. Cement and Concrete Composites, 29, 377–382.
Acknowledgements
Supports from National High Technology Research and Development Program (“863 Program”, 2015AA034701) and Natural Science Foundations of China (Grant No. 51302105) are greatly acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Shah, S.P., Hou, P., Cheng, X. (2015). Durability of Cement-Based Materials and Nano-particles: A Review. In: Sobolev, K., Shah, S. (eds) Nanotechnology in Construction. Springer, Cham. https://doi.org/10.1007/978-3-319-17088-6_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-17088-6_2
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-17087-9
Online ISBN: 978-3-319-17088-6
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)