Abstract
Hydrogen generation has the potential to deliver an environmentally friendly, low-cost, and renewable energy source. One promising generation method is solar water splitting via a photoelectrochemical (PEC) reaction as an alternative to a combined photovoltaic-electrolyser system. Although PEC technology shows potential, the efficiency of this technology is currently limited by thermodynamics and technical issues in implementation. The development of novel materials is one route for improvements in PEC system efficiencies. In particular, with multiple band-gap electrodes, the thermodynamic efficiency, and so the overall generated hydrogen quantity, can be increased.
In the case of applications where there are heating requirements beyond the need to generate hydrogen, there are further options for extracting energy from the solar resource. Longer wavelength radiation not used by the PEC system may be available for use. Just as it is possible to have a photovoltaic–thermal (PV/T) hybrid system which generates both electricity and heat, a PEC unit may also be combined with a solar thermal unit as a hybrid PEC/T system. This combined heat and power (CHP) system will deliver heat directly and also both heat and power through the use of the hydrogen as a fuel in, for instance, a fuel cell.
Despite the promise of PEC technology, there is little research in modelling and system simulation and especially for hybrid systems. Systems’ modelling is a prerequisite for optimal design, especially for the design and exploration of novel configurations. A system model of a dwelling, with varying heat and power demands, together with a hybrid PEC/T system for meeting these demands, has been developed and implemented in Matrix Laboratory (MATLAB). The full system integrates a PEC unit for hydrogen generation, a solar thermal unit, a proton exchange membrane (PEM) fuel cell, a hydrogen storage tank, and a buffer tank for heat storage. The model has been evaluated through a case study consisting of a typical three-person household in the UK. The aim of the case study is to investigate present and near-future capabilities of renewable energy supply and CO2 emission reduction subject to the UK building energy regulations. Results show that single band-gap photo-electrode materials are not able to meet the energy demands of the household adequately if the demand includes power and both space and hot water heating. However, with novel multiple band-gap electrodes, in a hybrid CHP system, the system efficiency can be significantly increased, and we demonstrate the potential to help meet the comprehensive demands of a typical household through the development of novel materials for PEC reactions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dubey S, Sandhu GS, Tiwari GN (2009) Analytical expression for electrical efficiency of PV/T hybrid air collector. Appl Energy 86:697–705
Joshi AS, Dincer I, Reddy BV (2009) Performance analysis of photovoltaic systems: a review. Renew Sustain Energy Rev 13:1884–1897
da Silva RM, Fernandes JLM (2010) Hybrid photovoltaic/thermal (PV/T) solar systems simulation with Simulink/Matlab. Sol Energy 84:1985–1996
Kumar R, Rosen MA (2011) A critical review of photovoltaic-thermal solar collectors for air heating. Appl Energy 88:3603–3614
DECC (2011) 2050 Pathways analysis. Part 1, 2
Conibeer GJ, Richards BS (2007) A comparison of PV/electrolyser and photoelectrolytic technologies for use in solar to hydrogen energy storage systems. Int J Hydrogen Energy 32:2703–2711
Wingens J, Krost G, Ostermann D, Damm U, Hess J (2008) Application of photo-electrochemical hydrogen production for autonomous solar based electricity supply. Third international conference on electric utility deregulation and restructuring and power technologies, 2008 DRPT. pp. 2470–2475
James BD, Baum GN, Perez J, Baum KN, Square OV (2009). Technoeconomic analysis of photoelectrochemical (PEC) hydrogen production. DOE report
Pinaud BA, Benck JD, Seitz LC, Forman AJ, Chen Z, Deutsch TG et al (2013) Technical and economic feasibility of centralized facilities for solar hydrogen production via photocatalysis and photoelectrochemistry. Energy Environ Sci 6:1983–2002
Ross RT, Hsiao T-L (1977) Limits on the yield of photochemical solar energy conversion. J Appl Phys 48:4783–4785
Bolton JR (1978) Solar fuels. Science 202:705–711
Buzás J, Farkas I, Biró A, Németh R (1998) Modelling and simulation aspects of a solar hot water system. Math Comput Simul 48:33–46
Kalogirou SA (2004) Solar thermal collectors and applications. Prog Energy Combust Sci 30:231–295
International A (2003) ASTM Standard C33, 2003—specification for concrete aggregates. West Conshohocken, PA
Gueymard CA (2001) Parameterized transmittance model for direct beam and circumsolar spectral irradiance. Sol Energy 71:325–346
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Ronaszegi, K., Brett, D., Fraga, E. (2015). System Modelling for Hybrid Solar Hydrogen Generation and Solar Heating Configurations for Domestic Application. In: Sayigh, A. (eds) Renewable Energy in the Service of Mankind Vol I. Springer, Cham. https://doi.org/10.1007/978-3-319-17777-9_12
Download citation
DOI: https://doi.org/10.1007/978-3-319-17777-9_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-17776-2
Online ISBN: 978-3-319-17777-9
eBook Packages: EnergyEnergy (R0)