Abstract
In mechanics of materials it is important to know the stress–strain relation of each material in order to understand their behaviour under different loads. Optical methods are used for determine different kind of stresses and interferometry is the most used tool. In this work it is presented a new alternative to determine the stress–strain based in one beam which is reflected in the surface of the material while it is in a compression test as the ASTM indicates. It is taken the material as a reflective surface which acts as a spherical mirror and it will scatter light, the scattered area will increase as the deformation increases. The reflected beam is analysed applying beam propagation equations and Digital Image Processing for getting the increase of the scattered area. Finally it is plot the relation between the applied stress and the beam propagation. There is also presented the accuracy, sensitivity and a theoretical demonstration of the method.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
F. Beasley, Theory and Design for Mechanical Measurements, 3rd edn. (Wiley, New York, 2011)
J. Gere, B. Goodno, Mecánica de Materiales, 7th edn. (Cengage Learning, México, 2009)
J. Mathar, Determination of initial stresses by measuring the deformation around drilled holes. Trans. ASME 56(4), 249–254 (1934)
ASTM, Determining Residual Stresses by the Hole-Drilling Strain Gage Method. ASTM Standard Test Method E837-08 (American Society for Testing and Materials, West Conshohocken, PA, 2008)
Y. Min, D. Fulong, X. Huimin, L. Jian, Measurement of non-uniform residual stress by combined moiré interferometry and hole-drilling method: theory, experimental method and applications. Acta Mech. Sinica 19(6) (2003)
M. Steinzig, T. Takahashi, Residual stress measurement using the hole-drilling method and laser speckle interferometry part IV: measurement accuracy. Exp. Tech. 27(6), 59–63 (2003). ET occasionally features short Industry/Application articles under the title, “Technology Applications”
E. Ponslet, M. Steinzig, Residual stress measurement using the hole-drilling method and laser speckle interferometry part II: analysis technique. Exp. Tech. 27(4), 17–21 (2003). ET occasionally features short Industry/Application articles under the title, “Technology Applications.”
E. Ponslet, M. Steinzig, Residual stress measurement using the hole-drilling method and laser speckle interferometry part III: analysis technique. Exp. Tech. 27(5), 45–48 (2003). ET occasionally features short Industry/Application articles under the title, “Technology Applications”
G.S. Schajer, Advances in hole-drilling residual stress measurements. Exp. Mech. 50(2), 245–253 (2010)
J. Ribeiro, J. Monteiro, M. Vaz, H. Lopes, P. Piloto, Measurements of residual stresses with optical techniques. Strain 45(2), 123–130 (2009)
A.K. Asundi, Moiré Interferometric Strain Sensor (MISS) for Deformation and Strain Measurement Patent # US20070070327 A1, 2011
M. Knauer, J. Kaminski, G. Häusler, Phase measuring deflectometry: a new approach to measure specular free-form surfaces. Proc. SPIE 5457, 366 (2004)
Y. Liu, E. Olesch, Z. Yang, G. Häusler, Fast and accurate deflectometry with crossed fringes. Adv. Opt. Technol 3, 4 (2014). doi:10.1515/aot-2014-0032
R. Huang, P. Su, R. Parks, G. Brusa, M. Idir, H. Burge, Measuring aspheric surfaces with reflection deflectometry. SPIE Newsroom (2013). doi: 10.1117/2.1201309.005087
J. Alda, Laser and Gaussian beam propagation and transformation. Encyclopaedia of Optical Engineering (2003)
A. Yariv, Quantum Electronics, 3rd edn. (Wiley, New York, 1990)
R. Wood, Physical Optics, 3rd edn. (Optical Science of America, Washington, DC, 1988)
B.E.A. Saleh, M.C. Teich, Fundamentals of Photonics (Wiley, New York, 1991)
ASTM E-9, ICS Number Code 77.040.10 (Mechanical testing of metals). doi:10.1520/E0009-09
JDSU Self-Contained Helium-Neon Laser Systems 1500 series Specification Sheet, JDS Uniphase Corporation 10138846 005 0512 SCHNL1500.DS.CL.AE 2012
J.W. Goodman, Introduction to Fourier Optics, 3rd ed. Roberts & Company (2005)
Acknowledgement
Alonso Saldaña Heredia wants to thank CONACYT for the grant No. 360140.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this paper
Cite this paper
Heredia, A.S., Aguilar, P.A.M., Ocampo, A.M. (2017). Aluminum Strain Measurement by Beam Propagation. In: Martínez-García, A., Furlong, C., Barrientos, B., Pryputniewicz, R. (eds) Emerging Challenges for Experimental Mechanics in Energy and Environmental Applications, Proceedings of the 5th International Symposium on Experimental Mechanics and 9th Symposium on Optics in Industry (ISEM-SOI), 2015. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-28513-9_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-28513-9_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-28511-5
Online ISBN: 978-3-319-28513-9
eBook Packages: EngineeringEngineering (R0)