Abstract
This paper presents the design improvement of a polymer-based tendon-driven wearable robotic hand, Exo-Glove Poly. The wearability and adaptiveness are the key points to design the Exo-Glove Poly in considering the cases of practical use. Thus, magnets are embedded into the wearable part for easy donning and doffing. Also, the tendon length adjustment mechanism is designed to adapt different hand sizes by changing length of the tendons. Through these improvements, it is increased the change to practical use of the Exo-Glove Poly.
This study was supported by a grant (NRCTR-EX16001) of the Translational Research Center for Rehabilitation Robots, Korea National Rehabilitation Center, Ministry of Health & Welfare, Korea.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Fontana, M., Dettori, A., Salsedo, F., Bergamasco, M.: Mechanical design of a novel hand exoskeleton for accurate force displaying. In: IEEE International Conference on Robotics and Automation (ICRA), pp. 1704–1709 (2009)
Chiri, A., Vitiello, N., Giovacchini, F., Roccella, S., Vecchi, F., Carrozza, M.C.: Mechatronic design and characterization of the index finger module of a hand exoskeleton for post-stroke rehabilitation. IEEE/ASME Trans. Mechatron. 17(5), 884–894 (2012)
Hasegawa, Y., Mikami, Y., Watanabe, K., Firouzimehr, Z., Sankai, Y.: Wearable handling support system for paralyzed patient. In: IEEE/RSJ International Conference in Intelligent Robots and Systems (IROS), pp. 741–746 (2008)
Wege, A., Hommel, G.: Development and control of a hand exoskeleton for rehabilitation of hand injuries. In: IEEE/RSJ International Conference in Intelligent Robots and Systems (IROS), pp. 3046–3051 (2005)
Polygerinos, P., Galloway, K.C., Savage, E., Herman, M., O’Donnell, K., Walsh, C.J.: Soft robotic glove for hand rehabilitation and task specific training. In: International Conference on Robotics and Automation (ICRA) (2015)
Yap, H.K., Lim, J.H., Nasrallah, F., Goh, J.C.H., Yeow, R.C.H.: A soft exoskeleton for hand assistive and rehabilitation application using pneumatic actuators with variable stiffness. In: International Conference on Robotics and Automation (ICRA) (2015)
Lee, S., Landers, K., Park, H.S.: Development of a Biomimetic Hand Exotendon Device (BiomHED) for restoration of functional hand movement post-stroke. IEEE Trans. Neural Syst. Rehabil. Eng. 22(4), 886–898 (2014)
Idrogenet srl. (2014), Gloreha®. http://www.gloreha.com/
In, H., Kang, B.B., Sin, M., Cho, K.J.: Exo-Glvoe: soft wearable robot for the hand using soft tendon routing system. IEEE Robot. Autom. Mag. 22(1), 97–105 (2015)
Kang, B.B., Lee, H., In, H., Jeong, U., Chung, J., Cho, K.J.: Development of a polymer-based tendon-driven wearable robotic hand. In: IEEE International Conference on Robotics and Automation (ICRA) (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Lee, H., Kang, B.B., In, H., Cho, KJ. (2017). Design Improvement of a Polymer-Based Tendon-Driven Wearable Robotic Hand (Exo-Glove Poly). In: González-Vargas, J., Ibáñez, J., Contreras-Vidal, J., van der Kooij, H., Pons, J. (eds) Wearable Robotics: Challenges and Trends. Biosystems & Biorobotics, vol 16. Springer, Cham. https://doi.org/10.1007/978-3-319-46532-6_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-46532-6_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-46531-9
Online ISBN: 978-3-319-46532-6
eBook Packages: EngineeringEngineering (R0)