Skip to main content

Sodalite Solids Formation at the Surface of Iron Oxide and Its Impact on Flocculation

  • Chapter
Light Metals 2013

Part of the book series: The Minerals, Metals & Materials Series ((MMMS))

  • 364 Accesses

Abstract

Sodalite represents the main desilication product (DSP) phase formed from reactive silica during alkaline digestion of bauxite in the Bayer Process. Previous studies into DSP effects on bauxite residue flocculation have focused on flocculant selection or digestion optimisation, not answering a fundamental question: does DSP coat the residue and thereby change surface properties? This study sought to answer that question by contrasting the physicochemical properties of hematite slurries (as a model phase for residue) containing DSP where it was either made in-situ or added as a physical mixture. On the basis of differences found in dewatering behaviour, zeta potential, desilication rates and microscopy of the solids, it is proposed that DSP nuclei initially associate with the hematite surface and subsequently affect flocculant adsorption chemistry, resulting in different extents of flocculant adsorption and smaller aggregates. The practical implications for flocculation processes are discussed.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 109.00
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. P. Smith, “The Processing of High Silica Bauxites — Review of Existing and Potential Processes,” Hydrometallurgy, 98 (2009), 162–176.

    Article  Google Scholar 

  2. T. Oku and K. Yamada, “The Dissolution Rate of Quartz and the Rate of Desilication in the Bayer Liquor,” Light Metals, (1971), 31–45.

    Google Scholar 

  3. Q. Dai, M.J. Davis and R. Zhang, “New Flocculants for Improved Processing of High Silica Bauxites,” Travaux, 25 (2010), 200–204.

    Google Scholar 

  4. M. Davis et al., “Use of Silicon-containing Polymers for Improved Flocculation of Solids in Processes for the Production of Alumina from Bauxite,” US Patent Pub No.: US 2010/0098607 A1 (2010).

    Google Scholar 

  5. A. Senaputra et al., “The Impact of Desilication Product on Bauxite Residue Flocculation,” 9th International Alumina Quality Workshop, Perth, Australia, (2012), 186–192.

    Google Scholar 

  6. N.A.S. Webster et al., “An Investigation of the Mechanisms of Goethite, Hematite and Magnetite-seeded Al(OH)3 Precipitation from Synthetic Bayer Liquor,” Hydrometallurgy, 109 (2011), 72–79.

    Article  Google Scholar 

  7. J. Addai-Mensah et al., “Reduction of Sodium Aluminosilicate Scale in Bayer Plant Heat Exchangers”, Light Metals, (2001), 13–18.

    Google Scholar 

  8. J.B. Farrow and J.D. Swift, “A New Procedure for Assessing the Performance of Flocculants,” Int. J. Min. Proc, 46 (1996), 263–275.

    Article  Google Scholar 

  9. E. Karakyriakos and V. Patrick, “Industrial Applications Using Improved Measurements of Particle Surface Charge,” Report MERIWA, No. 253, (Perth: MERIWA, 2005).

    Google Scholar 

  10. M. Kosmulski, “The pH-dependent Surface Charging and Points of Zero Charge: V. Update,” J. Colloid Interf. Sci., 353 (2011), 1–15.

    Article  Google Scholar 

  11. M. Kosmulski and J.B. Rosenholm, “High Ionic Strength Electrokinetics,” Adv. Colloid Interf., 112 (2004), 93–107.

    Article  Google Scholar 

  12. H. Zhao et al, “Alteration of Kaolinite to Cancrinite and Sodalite by Simulated Hanford Tank Waste and its Impact on Cesium Retention,” Clay Clay Min., 52 (2004), 1–13.

    Article  Google Scholar 

  13. F. Jones, “The Mechanism of Bayer Residue Flocculation,” (Ph.D. thesis, Curtin University of Technology, 1998).

    Google Scholar 

  14. A.T. Owen et al., “Using Turbulent Pipe Flow to Study the Factors Affecting Polymer-bridging Flocculation of Mineral Systems,” Int. J. Min. Proc., 97 (2008), 90–99.

    Article  Google Scholar 

  15. J. Gregory and S. Barany, “Adsorption and Flocculation by Polymers and Polymer Mixtures,” Adv. Colloid Interf., 169 (2011), 1–12.

    Article  Google Scholar 

  16. J.G. Fleer and J.M.H.M Scheutjens, “Modelling Polymer Adsorption, Steric Stabilisation, and Flocculation,” in Coagulation and Flocculation, ed. B. Dobias (New York: Marcel Dekker, 1993), 209–263.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Editor information

Barry A. Sadler

Rights and permissions

Reprints and permissions

Copyright information

© 2016 The Minerals, Metals & Materials Society

About this chapter

Cite this chapter

Senaputra, A., Fawell, P., Jones, F., Smith, P. (2016). Sodalite Solids Formation at the Surface of Iron Oxide and Its Impact on Flocculation. In: Sadler, B.A. (eds) Light Metals 2013. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-65136-1_13

Download citation

Publish with us

Policies and ethics