Abstract
Multiaxial tests are usually intricate and not adapted to each other. In this chapter, some effective ways for material testing with the following comparison of the results are suggested. The most important multiaxial tests for hard foams are proposed and implemented. Based on these tests, recommendations for further improvements of the experiment setups are given. Open questions are listed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
Vibrating mill CryoMill, Retsch GmbH, Haan with the grinding bowl 35Â ml and the ball \(\oslash \)20Â mm.
- 2.
2K epoxy resin adhesive Araldit\(^\circledR \)Â 2011, Huntsman, Everberg.
- 3.
e.g., abifor\(^\circledR \) 1605 (ethylene vinyl acetate E/VA with 28% VA-content, grain size until \(300\,\upmu \)m), manufacturer Abifor AG, Wutöschingen, effect of temperature 125 \(^\circ \)C during 30 min.
- 4.
Material-Nr. 1.4301, X5CrNi18-10, Record Metall-Folien GmbH, Mühlheim am Main.
- 5.
CASO foil bag of thickness 0.08 mm, Art.-Nr. 01220, CASO GERMANY Braukmann GmbH, Arnsberg.
References
Kolupaev VA, Becker W, Massow H, Dierkes D (2014) Design of test specimens from hard foams for the investigation of biaxial tensile strength (in German: Auslegung von Probekörpern aus Hartschaum zur Ermittlung der biaxialen Zugfestigkeit). Forsch Ingenieurwes 78(3–4):69–86
Burzyński W (1929) Über die Anstrengungshypothesen. Schweizerische Bauzeitung 94(21):259–262
Burzyński W (1930) Über Anstrengungshypothesen (Reply to Sandel G. D.). Schweizerische Bauzeitung 95(7):87–88
Altenbach H, Bolchoun A, Kolupaev VA (2014) Phenomenological yield and failure criteria. In: Altenbach H, Öchsner A (eds) Plasticity of pressure-sensitive materials. Engineering Materials. Springer, Berlin, pp 49–152
Pae KD (1977) The macroscopic yielding behaviour of polymers in multiaxial stress fields. J Mater Sci 12:1209–1214
ROHACELL (2010) Product information ROHACELL\(^{\textregistered }\) IG/IG-F. Evonik Industries, Evonik Röhm GmbH, Performance Polymers Business Unit, Darmstadt. http://www.rohacell.com
DIN-Taschenbuch 235 (1998) Schaumstoffe - Prüfung, Anforderung, Anwendung: Normen (Kunststoffe 11). Beuth Verlag GmbH, Berlin, Wien, Zürich
ROHACELL (2010) Heat treatment of ROHACELL\(^{\textregistered }\). Evonik Industries, Evonik Röhm GmbH, Performance Polymers Business Unit, Darmstadt. http://www.rohacell.com
Christensen RM, Freeman DC, DeTeresa SJ (2002) Failure criteria for isotropic materials, applications to low-density types. Int J Solids Struct 39(4):973–982
DeRuntz JA, Hoffman O (1969) The static strength of syntactic foams. Trans ASME J Appl Mech 36:551–557
Deshpande VS, Fleck NA (2001) Multi-axial yield behaviour of polymer foam. Acta Mat 49(10):1859–1866
Gdoutos EE (2002) Failure of cellular foams under multiaxial loading. Compos Part A 33:163–176
Gdoutos EE, Daniel IM, Wang KA (2001) Multiaxial characterization and modeling of a PVC cellular foam. J Thermoplast Compos Mater 14:365–373
Graves FA, Nelson FC (1972) Fracture of rigid polyuretane foam under biaxial stress. In: Third Interamerican Conference on Materials Technology, Centro Regional de Ayuda Tecnica, organized be Southwest Research Institute, San Antonio, Texas, pp 503–507
Münch M, Schlimmer M (2000) Ermittlung mechanischer Kennwerte von Aluminiumschäumen. Mat-wiss u Werkstofftech 31:544–546
Münch M (2005) Mechanisches Kurzzeitverhalten von thermoplastischen Konstruktionsschaumstoffen unter mehrachsiger Beanspruchung. Dissertation, Institut für Werkstofftechnik, Universität Kassel
Zaslawsky M (1973) Multiaxial-stress studies on rigid polyurethane foam. Exp Mech 13(2):70–76
Kolupaev VA, Kraatz A, Moneke M, Bolchoun A (2006) Description of the multiaxial creep for hard foams (in German: Beschreibung der mehraxialen Kriechphänomene bei Hartschaumstoffen). Kautschuk, Gummi, Kunststoffe KGK 59(1–2):17–27
Kolupaev VA, Becker W, Massow H, Kiegelmann EM (2015) Reliable designs in foam (in German: Mit Schaumstoffen zuverlässig konstruieren). Mag Plast Kunststoffe Int. 105(1–2):32–35
Kraatz A (2007) Anwendung der Invariantentheorie zur Berechnung des dreidimensionalen Versagens- und Kriechverhaltens von geschlossenzelligen Schaumstoffen unter Einbeziehung der Mikrostruktur. Dissertation, Martin-Luther-Universität, Zentrum für Ingenieurwissenschaften, Halle-Wittenberg
Darkov AV, Shpiro GS (1965) Strength of materials (in Russ.: Soprotivlenie materialov). Visshaja Shkola, Moscow
Kolupaev VA (2006) 3D-Creep behaviour of parts made of non-reinforced thermoplastics (in German: Dreidimensionales Kriechverhalten von Bauteilen aus unverstärkten Thermoplasten). Dissertation, Martin-Luther-Universität Halle-Wittenberg, Halle-Saale
Fahlbusch NC, Becker W, Kolupaev VA, Geertz G (2016) Non-linear material behaviour and failure of closed-cell polymer foams. Acta Mech 227(11):3113–3121
Den Hartog JP (1949) Strength of materials. Dover Publications, New York
Feodosjev VI (1970) Strtength of materials (in Russ.: Soprotivlenije materialov). Nauka, Moscow
Stassi F (1973) Yield and fracture of metals under combined stresses. Strength Mater (Problemy Prochnosti) 5(5):32–40
Timoshenko SP, Young DH (1962) Elements of strength of materials. D. van Nostrand Company, Princeton
Vesik SP (1970) Handbook of strength of materials (in Russ.: Spravochnik po soprotivleniju materialov). Budivelnik, Kiev
Viot P (2009) Hydrostatic compression on polypropylene foam. Int J Impact Eng 36(7):975–989
Blohberger E (2013) Innendruckversuch. Persönliche Mitteilung
Jaeger JC, Cook NGW, Zimmerman RW (2007) Fundamentals of rock mechanics. Blackwell Publishing, Malden
Tarnopolski YM, Kinzis TJ (1981) Methods of static tests of reinforced plastics (in Russ.: Metody staticheskikh ispytanij armirowanykh plastikov). Chimija, Moscow
Widera GE, Zhao L (1999) On the determination of long-term hydrostatic strength of plastic pipe. In: Plastic pipe burst and fatique testing of PVC and HDPE pipe. Welding Research Council, WRC Bulletin 445, pp 24–45
Kossa A (2015) A new biaxial compression fixture for polymeric foams. Polymer Test 45:47–51
Feodosiev VI (2005) Advanced stress and stability analysis: Worked examples. Springer, Berlin
Wästlund G (1934) Untersuchung über die Festigkeit von Beton bei Belastungen, welche örtlich auf die Oberfläche sowie an Schleifen und Abbiegungen von Bewehrungseisen wirken. Tryckeri Aktiebolaget Thule, Stockholm
Papa E, Corigliano A, Rizzi E (2001) Mechanical behaviour of a syntactic foam \(/\) glass fibre composite sandwich: Experimental results. Struct Eng Mech 12(2):169–188
Axel Products Inc (2010) Equal biaxial extension, physical testing services. Report, S. Industrial Hwy, Ann Arbor. http://www.axelproducts.com/pages/hyperelastic.html
Darrell S, Gary M (1999) Multiaxial fatigue. Society of Automotive Engineers Inc., SAE International, Warrendale
Gabelli A (2006) Device for producing a biaxial state of tension. Publishing number EP0192283 (A1), European Patent Organisation. http://www.espacenet.com/index.en.htm
Hainsley B, Hebbner E, Walsh N (2014) The aluminium octopus: a first of it’s kind MTS integrated biaxial tensile test fixture. Project \(\#2\): Biaxial tensile test fixture. Video, Florida State University, Mechanical Engineering. https://www.youtube.com/watch?v=8ZHEZPFN45w
Lotz P (2010) Dielektrische Elastomerstapelaktoren für ein peristaltisches Fluidfördersystem. Dissertation, Fachbereich Elektrotechnik und Informationstechnik der Technischen Universität Darmstadt
Marques TMJ (2013) Ensaio biaxial sob tensões normais. Ph.D. thesis, Universidade de Aveiro, Departamento de Engenharia Mecânica
Miller J (1972) Low-cycle fatigue under biaxial strain controlled conditions. J Mater 7(3):307–314
Troshchenko V, Lebedev A, Strizhalo V, Stepanov GV (2000) Mechanical behavior of materials under different loading conditions (in Russ.: Mekhanicheskie svojstva materialov pri razlichnykh vidakh nagruzhenija). Logos, Kiew
Altenbach H, Kolupaev VA (2014) Classical and non-classical failure criteria. In: Altenbach H, Sadowski T (eds) Failure and damage analysis of advanced materials, vol 560. International Centre for Mechanical Sciences: Courses and Lectures. Springer, Wien, pp 1–66
Bert CW, Mills EJ, Hyler WS (1966) Mechanical properties of aerospace structural alloys under biaxial-stress conditions. Report AFML TR-66-229, DTIC Document AD488304, Battelle Memorial Institute, Columbus Laboratories, Wright-Patterson Air Force Base, Ohio
Kossira H (1996) Grundlagen des Leichtbaus: Einführung in die Theorie dünnwandiger stabförmiger Tragwerke. Springer, Berlin
Wick R (1951) Über das St. Venant’sche Prinzip und das Abklingen von Spannungen mit der Entfernung vom Lastangriff. Dissertation, Technische Hochschule, München
Barthold FJ (1993) Theorie und Numerik zur Berechnung und Optimierung von Strukturen aus isotropen, hyperelastischen Materialien. Dissertation, Universität Hannover, Forschungs- und Seminarberichte aus dem Bereich der Mechanik der Universität Hannover
Kremer T (2007) Analyse und Optimierung von Kerben in Faser-Kunststoff-Verbunden: Methoden zur Analyse und Bewertung von Ausschnitten sowie werkstoff-spezifische Optimierungsverfahren. Dissertation, Technische Universität, Darmstadt
von Kármán T (1911) Festigkeitsversuche unter allseitigem Druck. Zeitschrift des VDI 55(11):1749–1757
Kolupaev VA, Bleier A, Becker W (2011) Application of the bimodal elasticity theory to the foam core of a sandwich plate (in German: Anwendung der bimodalen Elastizitätstheorie auf den Schaumkern eines Sandwiches). In: Grellmann W (ed) Tagung Deformations- und Bruchverhalten von Kunststoffen, Kunststoff-Kompetenzzentrum Halle-Merseburg, Merseburg, 28 p
ASTM D 2736-78 (1982) Standard practices for determination of hydrostatic compressive strength of rigid syntactic foam. Canceled 1984 without replacement
FORD FLTM EU-BO 052-02 (2001) Determination of water permeability of foam, Ford Motor Company
Freund D, Nover G (1995) Hydrostatic pressure tests for the permeability-formation factor relation on crystalline rocks from the KTB (Das Kontinentale Tiefbohrprogramm der Bundesrepublik Deutschland) Drilling Project. Surv Geophys 16(1):47–62
NAVISTAR TMS 6510 (2001) Urethane foam, low permeability, NAVISTAR International
Massüger L (2011) Hydrostatische Druckversuche an harten Schäumen aus PVC. Persönliche Mitteilung, Airex AG, Technical Services, Sins
Gol’dman AY (1984) Volumetric deformation of plastics (in Russ.: Ob’ëmnoje deformierivanie plastmass). Mashinostroenie, Leningrad
Gol’dman AY (1994) Prediction of the deformation properties of polymeric and composite materials. ACS Professional Reference Book. American Chemical Society, Washington
Ainbinder SB, Tyunina EL, Cirule KI (1981) Polymer properties in various stress state (in Russ.: Svojstva polimerov v razlichnikh napryazhennykh sostoyaniyakh). Chimiya, Moscow
Triantafillou TC, Zhang J, Shercliff TL, Gibson LJ, Ashby MF (1989) Failure surfaces for cellular materials under multiaxial loads - II. Comparison of models with experiment. Int J Mech Sci 31(9):665–678
BS 903–5 (2004) Physical testing of rubber - Part 5: Guide to the application of rubber testing to finite element analysis. British Standard BS 903–5:2004
Peroni L, Avalle M, Peroni M (2008) The mechanical behaviour of aluminium foam structures in different loading conditions. Int J Impact Eng 35(7):644–658
Gioux G, McCormack TM, Gibson LJ (2000) Failure of aluminum foams under multiaxial loads. Int J Mech Sci 42(6):1097–1117
Fortes MA, Fernandes JJ, Serralheiro I, Rosa ME (1989) Experimental determination of hydrostatic compression versus volume change curves for cellular solids. J Test Eval 17(1):67–71
Leo CJ, Kumruzzaman M, Wong H, Yin JH (2008) Behavior of EPS geofoam in true triaxial compression tests. Geotext Geomembr 26(2):175–180
Masso Moreu Y, Mills NJ (2004) Rapid hydrostatic compression of low-density polymeric foams. Polymer Test 23(3):313–322
Viot P (2010) Behaviour of cellular material under dynamic loadings. Part 1: A macroscopic point of view. Mécanique Ind 11(1):1–23
Feng B, Xu ML, Zhao TF, Zhang ZJ, Lu TJ (2010) Triaxial extensometer for volumetric strain measurement in a hydro-compression loading test for foam materials. Meas Sci Technol 21(11):1–11
Hanssen AG, Hopperstad OS, Langseth M, Ilstad H (2002) Validation of constitutive models applicable to aluminium foams. Int J Mech Sci 44(2):359–406
Ruan D, Lu G, Ong LS, Wang B (2007) Triaxial compression of aluminium foams. Compos Sci Technol 67(6):1218–1234
Sridhar I, Fleck NA (2005) The multiaxial yield behaviour of an aluminium alloy foam. J Mate Sci 40(15):4005–4008
Bartl F, Klaus H, Dallner R, Huber O (2009) Material behaviour of a cellular composite undergoing large deformations. Int J Impact Eng 36(5):667–679
Mimura K, Umeda T, Riku I, Yamashita K (2007) Development of 3-dimensional compression device and its application to clarification of densification behavior of urethane-foam. Key Eng Mater 340:409–414
Shima S, Mimura K (1986) Densification behaviour of ceramic powder. Int J Mech Sci 28(1):53–59
Combaz E, Bacciarini C, Charvet R, Dufour W, Dauphin F, Mortensen A (2010) Yield surface of polyurethane and aluminium replicated foam. Acta Mater 58(15):5168–5183
Combaz E, Bacciarini C, Charvet R, Dufour W, Mortensen A (2011) Multiaxial yield behaviour of Al replicated foam. J Mech Phys Solids 59(9):1777–1793
Shafiq M, Ayyagari RS, Ehaab M, Vural M (2015) Multiaxial yield surface of transversely isotropic foams: Part II - Experimental. J Mech Phys Solids 76:224–236
Kolupaev VA, Mönnich S, Bijanzadeh P (2011) Specimens for 2D- and 3D-tension tests of hard foams (in German: Probekörper für 2D- und 3D-Zugversuche mit harten Schäumen). In: Grellmann W (ed) Tagung Deformations- und Bruchverhalten von Kunststoffen, Kunststoff-Kompetenzzentrum Halle-Merseburg, Merseburg, 21 p
Mills NJ (2010) Deformation mechanisms and the yield surface of low-density, closed-cell polymer foams. J Mater Sci 45:5831–5843
Ioffe AF (1928) The physics of crystals. McGraw-Hill, New York
Ioffe AF (1929) The physics of crystals (in Russ.: Fizika kristallov). Gosizdat, Moscow-Leningrad
Ponomarev SD, Biderman VL, Likharev KK, Makushin VM, Malinin NN, Feodosjev VI (1957) Strength analysis in mechanical engineering (in Russ.: Rascety na procnost’ v masinostroenii), vol 1. Gosudarstvennoe nauchno-technicheskoe izdatel’stvo mashinostroitel’noj literaturi, Moskow
Troshchenko VT, Krasovskij AJ, Pokrovskij VV, Sosnovskij LA, Strizhalo VA (2000) Strength of materials to deformation and fracture, Handbook (in Russ.: Soprotivlenie materialov deformirovaniju i razrusheniju. Spravochnoe posobie). Logos, Kiew
Kolupaev VA, Bolchoun A, Altenbach H (2011) Strength hypothesis applied to hard foams. Appl Mech Mater 70:99–104 (Advances in Experimental Mechanics VIII)
Bich PM (1980) Strength of gypsum in hydrostatic tension. Strength Mater 12(2):234–237
Calloch S, Marquis D (1997) 3D experimental and numerical investigations to test constitutive equations for nonproportional cyclic plasticity. In: Transactions of the 14th International Conference on Structural Mechanics in Reactor Technology, Lyon, vol L02\(/\)1, pp 43–50
Cridland L, Wood WG (1968) A hydrostatic tension test of a brittle material. Int J Fract Mech 4(3):277–285
Hunsche U, Albrecht H (1990) Results of true triaxial strength tests on rock salt. Eng Fract Mech 35(4–5):867–877
King CY, Webb WW (1971) Internal fracture of glass under triaxial tension induced by thermal shock. J Appl Phys 42(6):2386–2395
Shen J, Min ZQ, Gu IC (1998) A new material test system - the true tension-compression triaxial facility. In: International Symposium on Strength Theory: Application, Development & Prospects for 21st Century, 9–11 September 1998. Science Press, New York, pp 551–556
Smith TL (1971) Fracture of polymers in biaxial and triaxial tension. J Polymer Sci Part C Polymer Symp 32(1):269–282
Jenkins CF (1920) British association for the advancement of science. Eng An Illus Wkly J 110:290–292 (Address to the Engineering Section G of the British Association at Cardiff, London)
Wu EM (1973) Phenomenological anisotropic failure criterion. In: Broutman LJ, Krock RH, Sendeckyi GP (eds) Treatise on composite materials, vol 2. Academic Press, New York, pp 353–431
Rychlewski J (2011) Elastic energy decomposition and limit criteria. Eng Trans Polish Acad Sci 59(1):31–63
Schleicher F (1928) Über die Sicherheit gegen Überschreiten der Fliessgrenze bei statischer Beanspruchung. Der Bauingenieur 9(15):253–261
Dowling NE (2013) Mechanical behavior of materials: Engineering methods for deformation, fracture, and fatigue. Pearson, Boston
Gummert P, Reckling KA (1994) Mechanik. Vieweg and Sohn, Braunschweig
Altenbach J, Altenbach H (1994) Einführung in die Kontinuumsmechanik. Teubner, Stuttgart
Scoble WA (1906) The strength and behaviour of ductil meterials under combined stress. Philos Mag J Sci 6(LXXII):533–547
Smith CA (1909) Some experiments on solid steel under combined stress. Eng Innov Technol Manuf Manag 88:238–243
Becker F (2009) Entwicklung einer Beschreibungsmethodik für das mechanische Verhalten unverstärkter Thermoplaste bei hohen Deformationsgeschwindigkeiten. Dissertation, Martin-Luther-Universität Halle-Wittenberg, Halle (Saale)
Junginger M (2002) Charakterisierung und Modellierung unverstärkter thermoplastischer Kunststoffe zur numerischen Simulation von Crashvorgängen. Dissertation, Universität der Bundeswehr, München
Haigh BP (1920) The strain-energy function and the elastic limit. Engineering 109:158–160
Osgood WR (1947) Combined-stress tests on 24S-T aluminium-alloy tubes. J Appl Mech 14(2):A147–A153
Altenbach H, Altenbach J, Zolochevsky A (1995) Erweiterte Deformationsmodelle und Versagenskriterien der Werkstoffmechanik. Dt. Verl. für Grundstoffindustrie, Stuttgart
Ratner SI (1949) Strength and plasticity of metals (in Russ.: Procjnost’ i plastichnost’ metallov). Oborongiz, Moscow
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Kolupaev, V.A. (2018). Experiments and Equipment. In: Equivalent Stress Concept for Limit State Analysis. Advanced Structured Materials, vol 86. Springer, Cham. https://doi.org/10.1007/978-3-319-73049-3_13
Download citation
DOI: https://doi.org/10.1007/978-3-319-73049-3_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-73048-6
Online ISBN: 978-3-319-73049-3
eBook Packages: EngineeringEngineering (R0)