Abstract
Sulfur emission in the form of SO2 in flue gases is one of the most serious atmospheric pollutants associated with coal combustion and non-ferrous metals production. The carbonate eutectic method for removing SO2 from flue gases at 723–923 K was initially proposed in the 1970s but despite its great efficiency (SO2 concentration in the flue gas after purification reached 0.003 volume %), it could not be implemented by industry due to the complexity of the carbonate melt regeneration stage. Earlier we proposed a method suited to coal -firing power stations where the melt was regenerated using CO as a reducing agent. However, most metallurgical plants do not use coal and therefore lack a large source of CO. Here we propose a method for removing sulfur from the carbonate eutectic melt by purging it with natural gas or a natural gas /air mixture, which are available in the vast majority of metallurgical plants. This reaction leads to the reduction of sulfate to H2S gas that leaves the melt. The experiments we conducted show that nearly complete sulfur removal from the melt is possible at 823 K and that the reaction rate is sufficiently high for a large scale process. One can foresee that this carbonate melt-based SO2 removal technique may become a practical and economically attractive method for limiting sulfur emission to the atmosphere from non-ferrous metallurgical processing plants.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dudka S, Adriano D (1995) Environmental impacts of metal ore mining and processing: a review. J Environ Qual 26(3):590–602
Davenport WG et al (2002) Extractive metallurgy of copper, 4th edn. Pergamon, Oxford, p 417
Crundwell FK et al (2011) Extractive metallurgy of nickel, cobalt and platinum-group metals. Elsevier, Oxford, p 583
Habashi F (2007) Copper metallurgy at the crossroads. J Min Metall B Metall 43(1):1–19
Nolan P (2000) Flue gas desulfurization technologies for coal-fired power plants. In: Coal-Tech 2000 international conference, Jakarta, Indonesia
Mcillroy RA, Atwood GA, Major CJ (1973) Absorption of sulfur-dioxide by molten carbonates. Environ Sci Technol 7(11):1022–1028
Moore KA (1973) Recovery of sulfur values from molten salt. US Patent 3867514
Yosim SJ et al (1973) Chemistry of molten carbonate process for sulfur oxides removal from stack gases. Adv Chem Ser 127:174–182
Kaplan V, Wachtel E, Lubomirsky I (2013) Carbonate melt regeneration for efficient capture of SO2 from coal combustion. RSC Adv 3(36):15842–15849
Lubomirsky I, Kaplan V (2014) Apparatus and method for removing sulfur dioxide from flue gases. US Patent 8852540
Lubomirsky I, Kaplan V (2016) Apparatus and method for removing sulfur dioxide from flue gases. EP Patent 2723473
Krebs T, Nathanson GM (2010) Reactive collisions of sulfur dioxide with molten carbonates. Proc Natl Acad Sci USA 107(15):6622–6627
Schlesinger ME et al (2011) Extractive metallurgy of copper. Elsevier, Amsterdam, p 455
Sinclair RJ (2005) The extractive metallurgy of zinc. The Australasian Institute of Mining and Metallurgy, Carlton Victoria, Australia, p 303
Sinclair RJ (2009) The extractive metallurgy of lead. The Australasian Institute of Mining and Metallurgy, Carlton Victoria, Australia, p 311
Ashar NG, Golwalkar KR (2013) A practical guide to the manufacture of sulfuric acid, oleums, and sulfonating agents. Springer, New York, London, p 152
Turkdogan ET (1980) Physical chemistry of high temperature technology. Academic Press Inc, New York, p 462
Paniccia F, Zambonin PG (1972) Interaction of inert-gases with ionic melts—solubility of He, Ar, N2, O2 and CH4 in (Na, K)2NO3 eutectic solvent. J Chem Soc Faraday Trans I 68(11):2083–2089
Kawase M, Otaka M (2013) Removal of H2S using molten carbonate at high temperature. Waste Manag (33):2706–2712
Arseev AV (1952) Combustion of industrial gases. Metallurgizdat, Moscow, p 393
Perry RH (1969) Chemical engineers handbook, 5th edn. McGraw-Hill Book Company, New York, p 2640
Acknowledgements
This work was supported by the Weizmann Institute of Science, via Yeda Ltd. This research is made possible in part by the historic generosity of the Harold Perlman Family.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Kaplan, V., Dosmukhamedov, N., Lubomirsky, I. (2018). Desulfurization of the Non-ferrous Smelter Flue Gases Based on Scrubbing with a Carbonate Eutectic Melt and Natural Gas Regeneration. In: Davis, B., et al. Extraction 2018. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-95022-8_17
Download citation
DOI: https://doi.org/10.1007/978-3-319-95022-8_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95021-1
Online ISBN: 978-3-319-95022-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)