Abstract
The forces, oscillations, or vibrations arising in the process of cutting must be taken into account, when optimizing any process operation or process. One of the high-performance machining processes is rotary cutting. However, the presence of an additional rotation of cutting elements decreases the rigidity of rotary tools, increases the variability of the operating forces, which require studying vibration dynamic phenomena at rotary processing. Rotary milling, being an intermittent cutting process, increases the possibility of obtaining discontinuous chips. The cutting tool operation according to the group cutting scheme is also used for efficient chip breaking. The measurements were carried out using a dynamometer and a spectrum analyzer. The obtained results reflect the dynamics of the rotary milling process and qualitatively coincide with the dynamic phenomena at conventional face milling and rotary turning. However, at the same time, we revealed characteristic features predetermined by the operation of the toothed cutting element according to the group cutting scheme.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bushuev VV (2011) Metallorezhuschie stanki (Machine tools). Mashinostroenie, Moscow
Yascherichin PI, Borisenko AV, Drivotin IG, Lebedev VYa (1987) Rotacionnoe rezanie materialov (The rotation cutting of materials). Nauka i tehnika, Minsk
Konovalov EG, Sidorenko VA, Sous AV (1972) Progressivnie shemi rezaniya metallov (Progressive scheme of rotary cutting of metals). Nauka i tehnika, Minsk
Bobrov VF, Ierusalimsky DE (1972) Rezanie metallov samovraschayuschimisya rezchami (Cutting of metals the self-rotating cutters). Mashinostroenie, Moscow
Zemlyansky VA, Lupkin BF (1980) Obrabotka visokoprochnih materialov instrumentami s samovraschayuschimisya rezchami (Processing of high-strength materials tools with the self-rotating cutters). Tehnika, Kiev
Novoselov YuA, Popok NN (1983) Klassifikaciya tipov rotacionnogo instrumenta (Classification of types of the rotation cutting). Vishaya shkola, Minsk
Kishawy HA, Gerber AG (2001) A model for the tool temperature during machining with a rotary tool. Med 23312:1–8
Lei S, Liu W (2002) High-speed machining of titanium alloys using the driven rotary tools. Int J Mach Tools Manuf 42:653–661
Sasahara H, Kato A, Nakajima H, Yamamoto H, Muraki T, Tsutsumi M (2008) High-speed rotary cutting of difficult-to-cut materials on multitasking lathe. Int J Mach Tools Manuf 48:841–850
Dessoly V, Melkote SN, Lescalier C (2004) Modeling and verification of cutting tool temperatures in rotary tool turning of hardened steel. Int J Mach Tools Manuf 44:1463–1470
Gurgen S, Sofuoglu MA, Cakir FH, Orak S, Kushan MC (2015) Multi response optimization of turning operation with self-propelled rotary tool. World conference on technology, innovation and entrepreneurship 195:2592–2600
Olgun U, Budak E (2013) Machining of difficult-to-cut-alloys using rotary turning tools. CIRP CMMO 8:81–87
Suzuki N, Suzuki T, An R, Ukai K, Shamoto E, Hasegawa Y, Horiike N (2014) Force prediction in cutting operations with self-propelled rotary tools considering bearing friction. In: 6th CIRP international conference on high performance cutting, vol 14, pp 125–129
Uhlmann E, Kaulfersch F, Roeder M (2014) Turning of high-performance materials with rotating indexable inserts. In: 6th CIRP international conference on high performance cutting, vol 14, pp 610–615
Ercoli C, Rotella M, Funkenbusch PD, Russell S, Feng C (2007) In vitro comparison of the cutting efficiency and temperature production of 10 different rotary cutting instruments. Part I: Turbine. J Prosthet Dent 248–262
Hao W, Zhu X, Li X, Turyagyenda G (2006) Prediction of cutting force for self-propelled rotary tool using artificial neural networks. J Mater Process Technol 180:23–29
Hosokawa A, Ueda T, Onishi R, Tanaka R, Furumoto T (2010) Turning of difficult-to-machine materials with actively driven rotary tool. CIRP Ann Manufact Technol 59:89–92
Armarego E, Karri V, Smith A (1994) Fundamental studies of driven and self-propelled rotary tool cutting processes—I. Theoretical investigation. Int J Mach Tools Manuf 34:785–801
Wang Z, Ezugwu E, Gupta A (1998) Evaluation of a self-propelled rotary tool in the machining of aerospace materials. Tribol Trans 41:289–295
Li S, Wang X, Xie L, Zhang H (2016) Rotary tool milling processes and its tool. J Beijing Univ Technol 42:481–486
Kato H, Shikimura T, Morimoto Y, Shintani K, Inoue T, Nakagaki K (2012) A study on driven-type rotary cutting for finish turning of carburized hardened steel. ICPE 523:250–255
Shalamov VG, Smetanin SD (2014) Kinematics rotary milling in the production of cell. Br J Sci Educ Cult 6:35–42
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Smetanin, S.D., Shalamov, V.G. (2019). Dynamics of Rotary Milling According to Group Scheme of Obtaining Discontinuous Chips. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_56
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_56
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)