Abstract
Mills with three rolls for bending sheets are widely used in the manufacture of large diameter welded pipes, tanks, and other long cylindrical products. Flat edges remain on the product after bending. The edges bending to the curvature product radius can be done with longitudinal rolling on special machines. For these machines, designing a methodology for calculating process power parameters must exist. The proposed technique is based on the bending model in dies with taking into account the influence of the noncontact deformation zone during sheet rolling. As a result, simple analytical dependencies for the vertical force engineering calculation, the rolling moment, and the noncontact deformation zone were obtained. The possibility verification of their application showed good convergence of the calculated and experimental data.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ignatov VN (1972) Valkovyye listogibochnyye mashiny (Roller sheet bending machines). NIIMash, Moscow
Moshnin EH (1956) Gibochnyye i pravil’nyye mashiny: monografiya (Bending and regular machines: monograph). Mashgiz, Moscow
Zolotin VE (1984) Trekhvalkovyye asimmetrichnyye listogibochnyye mashiny (Three-roll asymmetric sheet bending machines). Kuznechno-shtampovochnoye proizvodstvo (Forging and stamping production), Moscow
Bukher NM, Trofimov ID (1968) Trekhvalkovyye listogibochnyye mashiny sovremennykh konstruktsiy (Three-roll sheet bending machines of modern designs). Kuznechno-shtampovochnoye proizvodstvo (Forging and stamping production), Moscow
Shinkin VN (2017) Raschet parametrov listogibochnykh nesimmetrichnykh trekhvalkovykh val’tsov pri proizvodstve stal’nykh trub (Calculation of the parameters of the bending non-symmetrical three-roll rollers in the production of steel pipes). Chernaya metallurgiya (Steel in translation. Ferrous metallurgy), Moscow
Nesterov GV et al (2002) Opredeleniye osnovnykh tekhnologicheskikh parametrov pri gibke-prokatke listov i profiley na valkovykh mashinakh (Determination of the main technological parameters for bending and rolling of sheets and profiles on roller machines). Metallurgicheskaya i gornorudnaya promyshlennost’ (Metallurgical and mining industry), Moscow
Nesterov GV et al (2003) Primary technological parameters in the manufacture of curvilinear parts on roller-type bending machines. J Izv Univ. Chernaya metallurgiya, Moscow
Nesterov GV et al (2003) Determining the settings of the bending roller machine. J Izv Univ. (Steel in translation. Ferrous metallurgy), Moscow
Nesterov GV et al (2002) Primary technological parameters in the manufacture of curvilinear parts on roller-type bending machines. J Izv VUZ. Moscow State Institute of Steel and Alloys, Moscow
Samusev SV et al (2002) Metodika otsenki kalibrovok valkov formovochnogo stana (Method of evaluation of calibrations of rolls of a forming mill). Stal’ (Steel), Moscow
Davydov VI et al (1975) K opredeleniyu izgibayushchego momenta i ostatochnogo radiusa krivizny pri izgibe listovykh zagotovok (To the determination of the bending moment and the residual radius of curvature in the bending of sheet blanks). Kuznechno-shtampovochnoye proizvodstvo (Forging and stamping production), Moscow
Davydov VI, Davydov OV (1985) Nomogrammy dlya nastroyki valkovykh listogibochnykh mashin (Nomograms for the setting of roller bending machines). Kuznechno-shtampovochnoye proizvodstvo (Forging and stamping production), Moscow
Biblyy KN (1967) Val’tsovka bez podgibki kromok (Rolling without edge bending). Kuznechno-shtampovochnoye proizvodstvo (Forging and stamping production), Moscow
Tselikov AI et al (1982) Teoriya prokatki: Spravochnik (Theory of rolling: handbook). Metallurgiya, Moscow
Matveyev UM (1967) Teoreticheskiye osnovy proizvodstva svarnykh trub: monografiya (Theoretical foundations for the production of welded pipes: monograph). Metallurgiya, Moscow
Lysov MI (1966) Teoriya i raschet protsessov izgotovleniya detaley metodami gibki: monografiya (Theory and calculation of the processes of manufacturing parts by bending methods: monograph). Mashinostroyeniye, Moscow
Popov EA (1977) Osnovy teorii listovoy shtampovki: monografiya (Fundamentals of the theory of sheet punching: monograph). Mashinostroyeniye, Moscow
Lysov MI, Zakirov IM (1983) Plasticheskoye formoobrazovaniye tonkostennykh detaley aviatekhniki: monografiya (Plastic forming of thin-walled aircraft parts: monograph). Mashinostroyeniye, Moscow
Weintraub DA et al (1984) Tekhnologiya i osnastka dlya polucheniya detaley metodami gibki v shtampakh: monografiya (Technology and equipment for the production of parts by bending methods in dies: monograph). NIIMash, Moscow
Romanovskiy VP (2012) Spravochnik po kholodnoy shtampovke (Reference book on cold stamping: monografiya. Kniga po trebovaniyu, Moscow
Storozhev MV, Popov EA (1977) Teoriya obrabotki metallov davleniyem: monografiya (Theory of metal working with pressure: monograph). Mashinostroyeniye, Moscow
Gun GYA et al (1986) Plasticheskoye formoizmeneniye metallov: monografiya (Plastic forming of metals: monograph). Metallurgiya, Moscow
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Antimonov, A.M., Pushkareva, N.B., Reshetnikov, E.G. (2019). Cylindrical Shell Edges Bending Process Technological Features. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_84
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_84
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)