Abstract
The paradigm of the manufacturing systems was broken in 1980 with the beginning of the Additive Manufacturing (AM). This technology has been considered as the complement of the classic manufacturing technology, where the material is removed from a raw material until getting the final product. The addition of material in layers have been considered the new alternative to face the impact in the environment, the economy of materials and process, and the opportunity to generate new complex shapes limited by the classic manufacturing technology. The present chapter exposes the advances of the Fused Deposition Modeling (FDM), one of the seven technologies of AM which is mostly used during the past three decades. In this field, different adaptations and investigations of the technology have been focused on the increment of the capacity of the production system and improve the quality generated by this technique. The methodology used to determine the advance of AM was to employ a Systematic Literature Review using databases. The search was developed considering the keywords of AM for the construction of specific search syntax of documents associated with this technology. The documents obtained were analyzed to identify the progress in this technology. The results present the advancements of the FDM as a technology that change the industrial processing to customize the process, where the globalization makes possible to have this technology available at each desk.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Achillas C, Aidonis D, Lakovou E et al (2015) A methodological framework for the inclusion of modern additive manufacturing into the production portfolio of a focused factory. J Manuf Syst 1:328–339. https://doi.org/10.1016/j.jmsy.2014.07.014
Altinkemer K, Ozcelik Y, Ozdemir Z (2011) Productivity and performance effects of business process reengineering: a firm-level analysis. J Manage Inf Syst 27:129–162. https://doi.org/10.2753/MIS0742-1222270405
Anitha R, Arunachalam S, Radhakrishnan P (2001) Critical parameters influencing the quality of prototypes in fused deposition modelling. J Mater Process Technol 118:385–388. https://doi.org/10.1016/S0924-0136(01)00980-3
ASTM International (2013) F2792-12a—standard terminology for additive manufacturing technologies. Rapid Manuf Assoc 10–12. https://doi.org/10.1520/f2792-12a.2
Balderrama-Armendariz CO, MacDonald E, Espalin D et al (2018) Torsion analysis of the anisotropic behavior of FDM technology. Int J Adv Manuf Technol 1–11. https://doi.org/10.1007/s00170-018-1602-0
Beaman J, Bourell D, Wallace D (2014) Additive manufacturing and 3d printing. J Manuf Sci Eng
Boschetto A, Bottini L (2015) Roughness prediction in coupled operations of fused deposition modeling and barrel finishing. J Mater Process Technol 219:181–192. https://doi.org/10.1016/j.jmatprotec.2014.12.021
Boschetto A, Bottini L, Veniali F (2016) Finishing of fused deposition modeling parts by CNC machining. Robot Comput Integr Manuf 41:92–101. https://doi.org/10.1016/j.rcim.2016.03.004
Bourell D, Beaman J, Marcus J, Barlow W (1990) Solid freeform fabrication: an advanced manufacturing approach. In: Beaman J, Marcus H, Bourell J, Barlow W (eds) Solid freeform fabrication symposium proceedings, Austin, TX, pp 1–7
Campbell R, Dickens P (1994) Rapid prototyping: a global view. In: Marcus H, Beaman J, Barlow D et al (eds) 5th solid freeform fabrication symposium proceedings, Austin, TX, pp 110–117
Crump S, Stratasys I (1992) Apparatus and method for creating three-dimensional objects
Deckard CR (1989) US patent no 4,863,538. US Patent and Trademark Office, Washington, DC
Degarmo E, Black J, Kohser R (2003) Materials and processes in manufacturing, 9th edn. Wiley International
Dickson AN, Barry JN, McDonnell KA, Dowling DP (2017) Fabrication of continuous carbon, glass and kevlar fibre reinforced polymer composites using additive manufacturing. Addit Manuf 16:146–152. https://doi.org/10.1016/j.addma.2017.06.004
Dinon T, Caimmi M, Chiavenna A, Malosio M, Prini A, Scano A, Molinari Tosatti L, Curró C, Lenzi B, Megale V (2018) DUALarm: an open-source and 3D-printable device for upper limb neurorehabilitation. J Rehabil Assitive Technol Eng 5:1–13. https://doi.org/10.1177/2055668317749989
Dong G, Wijaya G, Tang Y, Zhao YF (2018) Optimizing process parameters of fused deposition modeling by Taguchi method for the fabrication of lattice structures. Addit Manuf 19:62–72. https://doi.org/10.1016/j.addma.2017.11.004
Esposito Corcione C, Palumbo E, Masciullo A et al (2018) Fused deposition modeling (FDM): an innovative technique aimed at reusing Lecce stone waste for industrial design and building applications. Constr Build Mater 158:276–284. https://doi.org/10.1016/j.conbuildmat.2017.10.011
Feygin M, Sik Pak S (1999) US patent no 5,876,550. US Patent and Trademark Office, Washington, DC
Ford S, Despeisse M (2016) Additive manufacturing and sustainability: an exploratory study of the advantages and challenges. J Clean Prod 137:1573–1587. https://doi.org/10.1016/j.jclepro.2016.04.150
Gardan J (2015) Additive manufacturing technologies: state of the art and trends. Int J Prod Res 54:3118–3132. https://doi.org/10.1080/00207543.2015.1115909
Gautam R, Idapalapati S, Feih S (2018) Printing and characterisation of Kagome lattice structures by fused deposition modelling. Mater Des 137:266–275. https://doi.org/10.1016/j.matdes.2017.10.022
Groover M (2007) Fundamentals of modern manufacturing: materials, processes and systems, 1st edn. Pearson Prentice-Hall, Mexico DF (in Spanish)
Haggerty S, Michael J, Williams PA (1993) Three-dimensional printing techniques
Hart KR, Wetzel ED (2017) Fracture behavior of additively manufactured acrylonitrile butadiene styrene (ABS) materials. Eng Fract Mech 177:1–13. https://doi.org/10.1016/j.engfracmech.2017.03.028
Hartke K (2011) Manufacturing technology support. OH
Hinderdael M, Jardon Z, Lison M et al (2017) Proof of concept of integrated load measurement in 3D printed structures. Sensors 17:328. https://doi.org/10.3390/s17020328
Hull CW (1986) Apparatus for production of three-dimensional objects by stereolithography, pp 1–16
Jeantette FP, Keicher DM, Romero JA, Schanwald LP (2000) Method and system for producing complex-shape objects. US006046426A
Jiao Z, Li F, Xie L et al (2018) Experimental research of drop-on-demand droplet jetting 3D printing with molten polymer. J Appl Polym Sci 135:1–12. https://doi.org/10.1002/app.45933
Jones JB, Wimpenny DI, Gibbons GJ (2015) Additive manufacturing under pressure. Rapid Prototyp J 21:89–97. https://doi.org/10.1108/RPJ-02-2013-0016
Kalpakjian S, Schmid S (2014) Manufacturing engineering and technology, 7th edn. Pearson, New Jersey
Kovan V, Altan G, Topal ES (2017) Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints. J Mech Sci Technol 31:2197–2201. https://doi.org/10.1007/s12206-017-0415-7
Mellor S, Hao L, Zhang D (2014) Additive manufacturing: a framework for implementation. Int J Prod Econ 149:194–201. https://doi.org/10.1016/j.ijpe.2013.07.008
Morozov EV, Novikov MM, Bouznik VM (2016) MRI monitoring and non-destructive quality measurement of polymeric patterns manufactured via stereolithography. INFONA 12:16–24
Nancharaiah T, Raju DR, Raju VR (2010) An experimental investigation on surface quality and dimensional accuracy of FDM components. Int J Emerg Technol 1:106–111
Peng A, Xiao X, Yue R (2014) Process parameter optimization for fused deposition modeling using response surface methodology combined with fuzzy inference system. Int J Adv Manuf Technol 73:87–100. https://doi.org/10.1007/s00170-014-5796-5
Petch M (2018) 3D printing industry jobs board launches. In: 3D Print Ind. https://3dprintingindustry.com/news/3d-printing-industry-jobs-board-launches-130004/. Accessed 7 Mar 2018
Raja V, Zhang S, Garside J et al (2006) Rapid and cost-effective manufacturing of high-integrity aerospace components. Int J Adv Manuf Technol 27:759–773. https://doi.org/10.1007/s00170-004-2251-z
Rayna T, Striukova L, Darlington J (2015) Co-creation and user innovation: the role of online 3D printing platforms. J Eng Technol Manag 37:90–102. https://doi.org/10.1016/j.jengtecman.2015.07.002
Salazar-Martín AG, Pérez MA, García-Granada A-A et al (2018) A study of creep in polycarbonate fused deposition modelling parts. Mater Des 141:414–425. https://doi.org/10.1016/j.matdes.2018.01.008
Schey J (2002) Manufacturing process (Procesos de Manufactura). MCGRAW-HILL/INTERAMERICANA DE MEXICO, Mexico, DF
Scott J, Gupta N, Weber C, Newsome S (2012) Additive manufacturing: status and opportunities
Shunta J (1997) Achieving world class manufacturing through process control, 1st edn. Prentice Hall, Saddle River
Soltesz JP, Rutkofsky M, Kerr K, Annunziata M (2016) The workforce of the future—advanced manufacturing’s impact on the global economy. GE Digit 1–27
Sood AK, Ohdar RK, Mahapatra SS (2009) Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method. Mater Des 30:4243–4252. https://doi.org/10.1016/j.matdes.2009.04.030
Soriano-Heras E, Blaya-Haro F, Molino C, de Agustín del Burgo JM (2018) Rapid prototyping prosthetic hand acting by a low-cost shape-memory-alloy actuator. J Artif Organs. https://doi.org/10.1007/s10047-017-1014-1
Srivastava S (2010) Process modeling and simulation. Wipro Applying Thought
Srivatsan TS, Sudarshan TS (2016) Additive manufacturing, innovations, advances, and aplications. CRC Press, Boca Raton
Tauseef A (2010) Flexible manufacturing system : hardware components. J Future Manuf Syst. https://doi.org/10.5772/10237
Thiesse, Morar D, Lasi H et al (2015) Economic implications of additive manufacturing and the contribution of MIS. 57:139–148. https://doi.org/10.1007/s12599-015-0374-4
Thomas D (2017) Developing enhanced carbon nanotube reinforced composites for full-scale 3D printed components. Reinf Plast 0:4–7. https://doi.org/10.1016/j.repl.2017.06.089
Vairis A, Petousis M, Vidakis N, Savvakis K (2016) On the strain rate sensitivity of abs and abs plus fused deposition modeling parts. J Mater Eng Perform 25:3558–3565. https://doi.org/10.1007/s11665-016-2198-x
Vollman T, Berry W, Whybark D (1997) Manufacturing planning and control systems, 4th edn. APICS
Wagner H, Dainty A, Hague R et al (2008) The effects of new technology adoption on employee skills in the prosthetics profession. Int J Prod Res 46:6461–6478. https://doi.org/10.1080/00207540701432623
Wohlers Associates Inc (2011) Additive manufacturing technology roadmap for Australia, Australia. http://3dprintingexpo.org/wp-content/uploads/Additive-Manufacturing-Technology-Roadmap-CSIRO-2011.pdf
Yamamoto N, Sakai K (2005) US patent no 6,858,059 B2. US Patent and Trademark Office, Washington, DC
Zandin KB (ed) (2001) Maynard’s industrial engineering handbook, 5th edn. MCGRAW-HILL, New York
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Aguilar-Duque, J.I., Hernández-Arellano, J.L., Avelar-Sosa, L., Amaya-Parra, G., Tamayo-Pérez, U.J. (2019). Additive Manufacturing: Fused Deposition Modeling Advances. In: García Alcaraz, J., Rivera Cadavid, L., González-Ramírez, R., Leal Jamil, G., Chong Chong, M. (eds) Best Practices in Manufacturing Processes. Springer, Cham. https://doi.org/10.1007/978-3-319-99190-0_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-99190-0_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-99189-4
Online ISBN: 978-3-319-99190-0
eBook Packages: EngineeringEngineering (R0)