Abstract
With the development of robot technology, it is an inevitable trend in the future that Robots will come into the normal life. Robots must be safe enough and ensure no hazard to person in order to coexist with people harmoniously. This paper provides a method to promote the robot safety by taking position-torque-position switching control. Namely, robot will work in normal position control mode for fast and accurate respond, until it impacts to humans. Once robot strikes to humans, it will change to torque control mode from position mode immediately. Robot will contact with humans very softly in torque control mode, so it is very safe. When humans leave from robot, it resumes to position control mode, and executes remainder tasks. Signal of striking to humans can be detected by torque sensor fixed in joint axis. Withdrawing of humans can be detected by measuring robot speed variety. The merit of above control method is that, at the condition of ensuring normal task performance, the robot safety has been enhanced remarkably. This method has been experimented at a 1DOF robot arm, and gain the anticipate results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Yamada, Y., Suita, K., Imai, K., Ikeda, H., Sugimoto, N.: A failure-to-safty robot system for human-robot coexistence. Robotics and Autonomous Systems 18, 283–291 (1996)
Lim, H.-O., Sunagawa, M., Takeuchi, N.: Development of human-friendly robot with collision force suppression mechanism. In: ICROS-SICE International Joint Conference, pp. 5712–5716 (2009)
Zinn, M., Khatib, O., Roth, B.: A new actuation approach for human friendly robot design. In: Proceedings of the IEEE International Conference on Robotics & Automation, pp. 249–254 (2004)
Schiavi, R., Grioli, G., Sen, S., Bicchi, A.: VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans. In: IEEE International Conference on Robotics and Automation, pp. 2171–2176 (2008)
Espiau, B., Boulic, R.: Collision avoidance for redundant robots with proximity sensors. Robotics Research 3, 243–252 (1986)
Kulic, D., Croft, E.: Pre-collision safety strategies for human-robot interaction. Auton Robot 22, 149–164 (2007)
Hyun, D., Yang, H.S., Park, J., Shim, Y.: variable stiffness mechanism for human-friendly robots. Mechanism and Mechine Theory 45, 880–897 (2010)
Morrel, J.B.: Parallel coupled micro-macro actuators, PhD Thesis, Massachusetts Institute of Technology, Cambrigde, MA (1996)
Pratt, G., Williamson, M.: Series elastics actuators. In: Proc. of IEEE/RSJ International Conference on Intelligent Robots and Systems, vol. 1, pp. 399–405 (1995)
Kilicaslan, S., Kemal Ozgoren, M., Kemal Ider, S.: Hybrid force and motion control of robots with flexible links. Mechanism and Machine Theory 45, 91–105 (2010)
Pun, J., Semercigil, S.E.: Joint stiffness control of a two-link flexible arm. Nonlinear Dynamics 21, 173–192 (2000)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Haibin, W., Hongqing, Z., Jianming, Y., Feng, L. (2011). Robot Arm Safety Improvement by Position/Torque Switching Control. In: Zeng, D. (eds) Applied Informatics and Communication. ICAIC 2011. Communications in Computer and Information Science, vol 225. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-23220-6_16
Download citation
DOI: https://doi.org/10.1007/978-3-642-23220-6_16
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-23219-0
Online ISBN: 978-3-642-23220-6
eBook Packages: Computer ScienceComputer Science (R0)