Abstract
The main emphasis of this study is to examine the effects of biodiesel thermo-physical properties on the fuel spray development using CFD modelling. A complete set of 12 thermo-physical properties is estimated for PME, SME and CME. The methods employed for this as reported here are generic as the methods are dependent on the chemical compositions and temperature. Sensitivity analysis is performed by integrating the estimated fuel properties into CFD modelling. Variations in spray development such as mass of fuel evaporated and liquid and vapour axial penetration length of biodiesel fuels are found to be different from fossil diesel due to the difference in thermo-physical properties. A total of five biodiesel properties are identified to have profound impacts on fuel spray development, which are liquid density, liquid viscosity, liquid surface tension, vapour pressure and vapour diffusivity. Nevertheless, only liquid surface tension and vapour pressure are the most sensitive fuel properties to the fuel spray development. The work has provided better representation of biodiesel properties, which improve the in-cylinder CFD simulation of reacting spray jet for the fuel.
F2012-B01-023
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chakravarthy K, McFarlane J, Daw SC, Ra Y, Reitz RD (2007) Physical properties of soy bio-diesel and implications for use of bio-diesel in diesel engines. SAE paper
Ra Y, Reizt RD, McFarlane J, Daw SC (2008) Effects of fuel physical properties on diesel engine combustion using diesel and bio-diesel fuels. SAE paper
Yuan W, Hansen AC, Zhang Q (2003) Predicting the physical properties of biodiesel for combustion modelling. Trans ASAE 6(46):1487–1493
Junfeng Y, Golovitchev VI (2009) Construction of combustion models for rapeseed methyl ester bio-diesel fuel for internal combustion engine applications. Biotechnology Advances 27:641–655
Reid RC, Prausnitz JM, Sherwood TK (1987) The properties of gases and liquids. McGraw Hill, New York
Anand K, Sharma RP, Mehta PS (2011) A comprehensive approach for estimating thermo-physical properties of biodiesel fuels. Appl Therm Eng 31:235–242
Allen CW, Watts KC, Ackman RG (1999) Predicting the surface tension of biodiesel fuels from their fatty acid composition. J Am Oil Chem Soc 76(3):317–323
Van Bommel MJ, Oonk HAJ, Van Miltenberg JC (2004) Heat capacity measurements of 13 methyl esters of n-carboxylic acids from methyl octonoate to methyl eicosanoate between 5 and 350 K. J Chem Eng Data 49:1036–1042
Ceriani R, Meirelles AJA (2004) Predicting vapour-liquid equilibria of fatty systems. Fluid Phase Equilib 215(2):227–236
Chung TH, Lee LL, Startling KE (1984) Applications of kinetic gas theory and multiparameter correlation for prediction of dilute gas viscosity and thermal conductivity. Ind Eng Chem Fundam 23:8–13
Chung TH, Ajlan M, Lee LL, Startling KE (1988) Generalized multiparameter correlation for nonpolar and polar fluid transport properties. Ind Eng Chem Res 27:671–679
Poling BE, Prausnitz JM, O’Connel JP (2001) The properties of gases and liquids. McGraw Hill, New York
Ochoterena R, Larsson M, Andersson S, Denbratt I (2008) Optical studies of spray development and combustion characterization of oxygenated and Fischer-Tropsch fuels. SAE paper
Tat ME, Van Gerpen JH (2000) The specific gravity of biodiesel and its blends with diesel fuel. J Am Oil Chem Soc 77(2):115–119
Tat ME, Van Gerpen JH (1999) The kinematic viscosity of biodiesel and its blends with diesel fuel. J Am Oil Chem Soc 76(12):1511–1513
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Cheng, X., M. Ismail, H., Ng, K., Gan, S., Lucchini, T. (2013). Effects of Fuel Thermo-Physical Properties on Spray Characteristics of Biodiesel Fuels. In: Proceedings of the FISITA 2012 World Automotive Congress. Lecture Notes in Electrical Engineering, vol 191. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-33777-2_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-33777-2_9
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-33776-5
Online ISBN: 978-3-642-33777-2
eBook Packages: EngineeringEngineering (R0)