This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur
Adams, D. F. and Doner, D. R.: “Longitudinal Shear Loading of a Unidirectional Composite”. In: Journal of Composite Materials, Vol. 1. 1967, 4.
Adams, D. F. and Doner, D. R.: “Transverse of Normal Loading of a Unidirectional Composite”. In: Journal of Composite Materials, Vol. 1. 1967, 152.
Adams, D. F.; Tsai, S. W.: “The Influence of Random Filament Packing on the Transverse Stiffness of Unidirectional Composites”. In: Journal of Composite Materials, Vol. 3, 1969, 368.
Ahmad, S.; Irons, B. M.; Zienkiewicz, O. C.: Analysis of Thick and Thin Shell Structures by Curved Finite Elements. Int. J. Num. Meth. Eng. 2.1970, 419–451.
Alam, N.; Asnani, N.: Vibration and damping analysis of multilayered rectangular plates with constrained viscoelastic layers. In: J. of Sound a Vibr. 97.1984, 597–614.
Allman, D. J.: “A Theory for Elastic Stresses Adhesive Bonded Lap Joints”. In: Quarterly Journal of Mechanics and Applied Mathematics. Vol. XXX. 1977, 4.
Allred, R. E.: “Behavior of Kevlar 49 Fabrik/Epoxy Laminates Subjected to Pin Bearing Loads”. In: Sandia Laboratories Report SAND 77–0347. April 1977.
Almroth, B.O.: “Design of Composite Material Structures for Buckling - An Evaluation of the Stat-of-the Art”. In: Lockheed Missiles and Space Co., Palo Alto, California March 1981, LMSC-D681425, AFWAL-TR-81–3102.
Ambartsumyan, S. A.: Theory of anisotropic plates. In: Stamford, Conn., Technomic Publishing Co. 1970.
Argyris, J. H.; Scharpf, D. W.: Matrix displacement analysis of shells and plates, Comp. Meth. in Appl. Mech. and Engng., 1 (1972).
Ashton, J. E., Halpin, J. C. and Petit, P. H.: Primer on Composite Materials: Anlaysis. In: Technomic Publishing Co., Inc. Stamford, Conn., 1969, 113.
Ashton, J. E.; Whitney, J. M.: Theory of laminated plates. In: Technomic Publishing Co. Stamford, Conn. 1970.
Azzi, V. D.; Tsai, S. W.: Elastic Muduli of Laminated Anisotropic Composites. In: Exp. Mech. June 1965, 177–185.
Azzi, V. D.; Tsai, S. W.: “Anisotropic Strength of Components”. In Experimental Mechanics, Vol. 5, 1965.286–288.
Barker, R. M.; Hatt, F.: “Analysis of Bonded Joints in Vehicular Structures”. In: AIAA Journal, Vol. 11, (1973): 1650–1654.
Barlow, J.: Optimal Stress Locations in Finite Element Models. In: Int. J. Num. Meth. Eng. 10.1976, 243–251.
Bathe, K.-J.; Bolourchi, S.: A Geometric and Material Nonlinear Plate and Shell Element. In: Comp. Struct. 11.1980, 23–48.
Bathe, K.-J.; Dvorkin, E. N.: A Formulation of Generall Shell Elements - The Use of Mixed Interpolation of Tensorial Components. In: Int. J. Num. Meth. Eng. 22. 1986, 697–722.
Bathe, K.-J.; Dvorkin, E. N.: A Four-Node Plate Bending Element based on Mindlin/Reissner Plate Theory and a Mixed Interpolation. Int. J. Num. Meth. Eng. 21. 1985, 367–383.
Batoz, J.-L.; Bathe, K.-J.; Ho, L.-W.: A Study of Three-Node Triangular Plate Bending Elements. In: Int. J. Num. Meth. Eng. 15.1980, 1771–1812.
Behrens, E.: “Elastic Constants of Filamentary Composites with Rectangular Symmetry”. In: Journal of Acoustical Society of America, Vol. 42. 1967, 367.
Behrens, E.: “Thermal Conductivity of Composite Materials”.In: Journal of Composite Materials,Vol.2.1968, 2.
Belytschko, T.; Liu, W.-K.; Ong, J. S.-J.; Lam, D.: Implementation and Application of a 9-Node Lagrange Shell Element with Spurious Mode Control. In: Comp. Struct. 20.1985,121–128.
Berg, K. R.: Problems in the Design of Joints and Attachments, in F. W. Wendt, H. Liebowitz, and N. Perrone (eds), “Mechanics of Composite Materials”. In: Proc. 5th Symp. Naval Structural Mechanics. 1967, Pergamon, New York 1970, 467–479.
Bert, C. W., Reddy, J. N., Reddy, V. S.; Chao, W. C.: “Analysis of Thick Rectangular Plates Laminated of Bimodulus Composite Materials”. In: AI-AA Paper. May 1980.
Bert, C. W.: “Vibration of Composite Structures”. In: U.S. Office of Naval Research Technical Report OU-AMNE-80–6. March 1980.
Bert, C. W.: Closed-form solution of an arbitrary laminated, elliptic plate under uniform pressure. In: J. of Elasticity, 11. 1981.
Bert, C. W.: Simplified Analysis of Static Shear Factors for Beams of Non Homogeneous Cross Section. In: J. Compos. Mater. 7. 1973, 525–529.
Bert, C. W.; Gordaninejad, F.: Transverse Shear Effects in Bimodular Composite Laminates. In: J. Compos. Mat. 17. 1983, 282–298.
Bickley, W. G.: “The Distribution of Stress Round a Circular Hole in a Plate”. In: Royal Society of London, Vol. 227A. July 2, 1928, 383–415.
Brintrup, H.: Beitrag zum zeitabhängigen Verformungsverhalten und zur Rißbildung orthotrop glasfaserverstärkter ungesättigter Polyesterharze unter ebener Beanspruchung. In: Dissertation. TH Aachen 1975.
Bulson, P. S.; The Stability of underground Cylintrical Shells. 55–77.
Burk, R. C.: “Standard Failure Criteria Needed for Advanced Composites”. In: Astronauties and Aeronauties, Vol. 21.1983, 58–62.
Burke, J.: Surfaces and Interfaces II. In: Syracuse. 1968.
Camin, R.A.; McKenzie, C.L.: “ A CAD Approach to Cost Estimating Composite Aircraft”. In Fibrous Composites in Structural Design, edited by Edward M. Lenoe, Donald W. Oplinger, and John J. Burke. Plenum Press. New York 1980,, pp. 381–398.
Card, Michael F.; Robert M. Jones: Experimental and Theoretical Results for Buckling of Eccentrically Stiffened Cylinders. In: NASA TN D-3639. October 1966.
Carpenter, N.; Belytschko, T.; Stolarski, H.: Locking and Shear Scaling Factors in C0-Bending Elements. In: Comp. Struct. 22. 1986, 39–52.
Chamis, C. C.; Sinclair, J. H.: “Prediction of Composite Hyral Behavior Mode Simply”. In: SAMPE Quarterly, Vol. 14. 1982, 33.
Chamis, C.: “Simplified Composite Micromechanics Equations for Hygrat, Thermal and Mechanical Properties”. In: SAMPE Quarterly. April 1984, 14–23.
Chamis, C. C.; Sendeckyj, G. P.: “Critique on Theories Predicting Thermoelastic Properties of Fibrous Composites”. Case Western Reserve University. Cleveland, Ohio. In: J. Composite Materials, Vol. 2, No. 3 July 1968, 332.
Chao, W. C.; Reddy, J. N.: Analysis of Laminated Composite Shells using a Degenerated 3-D Element. In: Int. J. Num. Meth. Eng. 20.1984, 1991–2007.
Chen, C. H.; Cheng, S.,: “Mechanical Properties of Fiber-Reinforced Composites”. In: Journal of Composite Materials, Vol. 1. 1967, 30.
Cherry, F. D.: “The Elimination of Fastener Hole Stress Concentrations Through the Use of Softening Strips”. In: AFFDL-TR-72–130. September 1972.
Chow, T. S.: On the propagation of flexural waves in an orthotropic laminated plate and its response to an impulsive load. In: J. Comp. Mat., 5. 1971.
Clough, R. W.; Johnson, R. J.: A Finite Element Approximation for the Analysis of Thin Shells. In: Int. J. Solids Struct. 4.1968, 43–60.
Collings, T.A.; Beauchamp, M.J.: Bearing Deflection Behaviour of a Loaded Hole in CFRP. In: Composites 15.1984, 33–42.
Conen, H., Kaitagidis, M.: Höhenleitwerk aus (FK“für den Alpha Jet in ”Verarbeiten und Anwenden kohlenstoffverstärkter Kunststoffe“). In: VDI-Verlag. 1981.
Connor, J. J.; Brebbia, C.: Stiffness Matrix for Shallow Rectangular Shell Elements. In: J. Eng. Mech. Div. ASCE 93. 1967, EM5 43–65.
Cormeau, I.: Elastoplastic Thick Shell Analysis by Viscoplastic Solid Finite Elements. In: Int. J. Num. Meth. Eng. 12. 1978, 203–227.
Cowper, G. R.; Lindberg, G. M.; Olson, M. D.: A Shallow Shell Finite Element of Triangular Shape. In: Int. J. Solids Struct. 6. 1970, 1133–1156.
Crisfield, M. A.: Shear-Constraints and Folded-Plated Structures. In: Eng. Comput. 2.1985, 238–246.
Cruse, T. A., Konish, H. J., Jr.; Waszczak, J. P.: “Strength Analysis for Design with Composite Materials Using Metals Technology”. Proceedings of the Colloquium on Structural Reliabilitiy, the Impact of Advanced Materials on Engineering Design, edited by J. L. Swedlow, T. A. Cruse and J. C. Halpin, Carnegie Mellon University. 1972, 222–236.
Cuntze, R.G.; Löbel, G.: Evaluation of Stress Strain Test Results for Effective Use in Computational Analysis and Adequate Statistical Quanties. In: ICOSSAR. 4th Intern. Conf. on Structural Safety and Reliability. Kobe, Japan 1985.
Cuntze, R.G.; Schuelein, R.: Einsatz der Bruchmechanik bei der Entwicklung von Struktur-Bauteilen aus Faserkunststoffverbund (FKV). Vortragsveranstaltung ‘Bruchmechanik bei Verbundwerkstoffen“ bei der Dechema. Frankfurt. 19.02.87.
Cuntze, R.G.: Probleme bei der Übertragung eines Zwischenfaserbruchkriteriums von einem UD-Probekörper auf einen Mehrschichtenverbund. In: DGLR-Symposium “Entwicklung und Anwendung von CFK-Strukturen”. TU, Berlin.
Dawe, D. J.: Rigid-Body Motions and Strain-Displacement Equations of Curved Shell Finite Elements. In: Int. J. Mech. Sci. 14. 1972, 569–578.
De Bruyne, N. A.: “The Strength of Glued Joints”. In: Aircraft Engineering, Vol. 16. 1944, 115–118.
Delale, F. and F. Erdogen: “Viscoelastic Analysis of Adhesively Bonded Joints”. In: NASA Contractor Report 159294. 1980.
De Jong,Theo.: “Stresses Aroung Pin Loaded Holes in Elastically Orthothro-pic or Isotropic Plates”. In: J. Composite Materials, Vol. 11. July 1977, 313–331.
De Vries, K. L.; Williams, M. L. and Chang, M. D.: “Adhesive Fracture of a Lap Shear Joint”. In: Experimental Mechanics. March 1974, 89–97.
Dharmarajan, S.; McCutchen, H.: Shear Coefficients for Orthotropic Beams. In: J. Compos. Mater. 7. 1973, 530–535.
Dickson, J. M., Hsu, T. M.; McKinney, J.: “Development of an Understanding of the Fatigue Phenomena in Bonded and Bolted Joints in Advanced Filamentary Composite Materials, Vol. 1”. In: Al-FDL-TR-72–64. June 1972.
Dobyns, A. L.: “The Analysis of Simply-Supported Orthotropic Plates Subjected to Static and Dynamic Loads”. In: American Institute of Aeronautics and Astronauties Journal. May 1981, 642–650.
Douglas, B. E.: Compressional damping in three-layer beams incorporating nearly incompressible viscoelastic cores. In: J. of Sound a Vibr. 104. 1986, S343–347.
Dürkop, J.: Untersuchungen zum Stabilitätsverhalten von erdverlegten Lagertanks aus GF-UP. In: Kunststoffe. München, 61. 1971, 9.
Dvorkin, E. N.; Bathe, K.-J.: A Continuum Mechanics based Four-Node Shell Elements for General Nonlinear Analysis. In: Eng. Comput. 1. 1984, 77–88.
Einsfeld, U.: Bauteile aus Kunststoffen und ihre Beurteilung. In: Mitteilungen Institut für Bautechnik, 5. Jhg. Nr. 1. Febr. 1974, 10–13.
Ekvall, J. C.: “Elastic Properties of Orthotropic Monofilament Laminates”. In: ASME Aviation Conference. Los Angeles, California, 61-AV-56. 1961.
Ekvall, J. C.: “Structural Behavior of Monofilament Composites”. In: AIAA/ASME 7th Structures. Structural Dynamics and Materials Conference. Palm Springs, California 1966, 250.
Eppler, R.: Sekundäre Belastung der Gurte eines I-Holms infolge der Schubverformung des Steges. In: Zeitschrift f. Flugwissenschaft und Weltraumforschung Bd. 7. 1983, 220–223.
Erdogan, F.;Ratwani, M.: “Stress Distribution in Bonded Joints”. In: Journal of Composite Materials, Vol. 5. July 1971, 378–393.
Ergatoudis, J. G.: Isoparametric Finite Elements in Two-and Three-Dimensional Stress Analsis. In: Ph. D. Thesis. University of Wales. Swansea 1968.
Eschenauer, H.; Post, P.U.; Bremicker, M.: Einsatz der Optimierungsprozedur SAPOP zur Auslegung von Bauteilkomponenten. Institut für Mechanik und Regelungstechnik. Siegen 1988.
Evans, D.; Christiansen, H.: MOVIE. BYU VERSION 4.2. (Movie Brigham Young University), A general purpose computer graphics system, Usermanual, June 1981 Edition
Ewald, G.; Lischke, N.: Das Werkstoffgesetz mehrlagiger anisotroper Gitterstrukturen. In: Bauingenieur 62. 1987, 255–261.
Farkas, J.; Jarmai, K.: Structural synthesis of sandwich beams with outler layers of box-section. In: J. of Sound a Vibr. 84. 1982.
Felgar, R., Jr.: “Formulas for Integral Containing Characteristic Functions of a Vibrating Beam”. In: Bureau of Engineering Research. The University of Texas Publication. 1950.
Flaggs, D. L.; Crossman, F. W.: “Viscoelastic Response of a Bonded Joint Due to Hygrothermal Exposure”. In: Modern Developments in Composite Materials and Structures, ASME. 1979.
Flaggs, D. L.; Vinson, J. R.: “Shear Properties of Promising Adhesives for Bonded Joints in Composite Material Structures”. In: AIAA Journal of Aircraft. January 1979.
Flaggs, D. L.; Vinsion, J. R.: “Hygrothermal Effects on the Buckling of Laminated Composite Plates”. In: Fibre Science and Technology, Vol. 11, No. 5. September 1978, 353–365.
Flaggs, D. L.: Elastic Stability of Generally Laminated Composite Plates Including Hygrothermal Effects. MMAE Thesis. University of Delaware. June 1978.
Forsberg, K.; Hartung, R.: An Evaluation of Finite Difference and Finite Element Techniques for the Analysis of General Shells. In: Symp. High speed Compu. Elastic Struct. (I.U.T.A.M). Liege 1970, 837–859.
Foye, R. L.: “An Evaluation of Various Engineering Estimates of the Transverse Properties of Unidirectional Composites”. In: SAMPE, Vol. 10. 1966, 31.
Foye, R. L.; Baker, D. J.: Design of Orthotropic Laminates. In: A/AA/ASME 11th Conf. Structures, Structural Dynamics, and Materials. Denver, Colorado April, 1970.
Franzblau, M. C.; Rutherford, J. L.: “Study of Micromechanical Properties of Adhesive Bonded Joints”. In: Second Quarterly Progress Report; Contract DAAA 21–67-C-0500. December 1967.
Fried, I.: Accuracy and conditions of curved (isoparametric) finite elements. In: J. Sound Vib., 31. 1973.
Fried I.: Numerical Integration in the Finite Element Method. In: Comp. Struct. 4. 1974, 921–932.
Fried, I.: Residual energy balancing technique in the generation of plate bending finite elements, Comp. and Struct., 4 (1974)
Fried, I.: Shear in C0- and C1-Bending Finite Elements. In: Int. J. Solids Struct. 9. 1973, 449–460.
Gatewood, B. E.; Gehring, R. W.: “Inelastic Mechanical Joint Analysis Method with Temperature and Mixed Materials”. Proceedings of the Army Symposium on Solid Mechanics. (AD 786–543). September 1974, 193–210.
Giencke, E.: Zur praktischen Berechnung der Spannungen und Verformungen langzeitbelasteter GFK-Bauteile. In: BR-International 16. 1977. H3/4,139–149 (Erweiterte Fassung des Vortrages auf der 13. AVK-Tagung. 1976).
Goland, M.,Reissner,E.: “Stresses in Cemented Joints”. In: ASME Journal of Applied Mechanics, 11.1947, A-17-A-27.
Gould, H. H.; Mikic, B. B.: “Areas of Contact and Pressure Distribution in Bolted Joints”. In: NASA CR 102866. (N70–41982). June 1970.
Green, A. K.,;.Assessment of Chopped Stund Mat GRP-Lamination for the Construction... Composites 13/1982, 401–405
Green, A. T.: “Acoustic Emission for NDT of Adhesive-Bonded Structures”. In: Structural Adhesives and Bonding. Proceedings of the Structural Adhesives and Bonding Conference arranged by Technology Conferences Associates. March 1979.
Greszczuk, L. B.: Stress concentrations and failure criteria for orthotropic and anisotropic plates with circular openings. In: Composite Materials: Testing and Design (second Conference), ASTM STP 497. 1972.
Grimes, G. C. et al.: “The Development of Nonlinear Analysis Mehtods for Bonded Joints in Advanced Filamentary Composite structures”. In: AFFDLTR-72–97. (AD 905201). September 1972.
Grootenhuis, P.: The control of vibrations with viscoelastic materials. In: J. of sound a vibr. 11. 1970.
Grover, A. S.; Kapur, A. D.: Effects of rotary and longitudinal inertias on transient response of undamped sandwich plates. In: J. of Sound a Vibr. 78. 1981, 175–183.
Guess, T. R.; Allred, R. E.; Gerstle, F. P., Jr.: “Comparison of Lap Shear Test Speciments”. In: Journal of Testing and Evaluation, Vol. 5, No. 3. March 1977, 84–93.
Hahn, H. T., Hwang, D. G., Cheng, H. C.; Lo, S. Y.: “Flywheel Materials Technology. Design Data Manual for Composite Materials”. Vol. 1. p. 3.4.1.1.
Hain, H.: “Knickstabilität des symmetrischen Trapezrahmens mit horizontal elastisch gestütztem Riegel”. In: Der Bauingenieur, H7. 1964, 277.
Halpin, J. C.; Tsai, S. W.: “Environmental Factors in Composite Materials Design”. In: Air Force Materials Laboratory Technical Report 67–423, Wright-Patterson Air Force Base. Ohio 1967.
Harris, H. G.; Ojalvo, I. V.; Hooson, R. E.: “Stress and Deflection Analysis of Mechanically Fastened Joints”. In: APFDL-TR-70–49. (AD 709221). May 1970.
Hart-Smith, L. J.: “Adhesive-Bonded Scarf and Stepped-Lap Joints”. In: NASA Cr 112237. January 1973.
Hart-Smith, L. J.: “Further Development in the Design and Analusis of Adhesive Bonded Structural Joints”. In: Douglas Paper 6922 presented at the ASTM Symposium on Joining of Composite Materials. 1980.
Hart-Smith, L. J.: “The Strength of Adhesive Bonded Single Lap Joints”. In: Douglas Aircraft Company WAD Technical Report MDC-J0472. April 1970.
Hart-Smith, L. J.: “The Strength of Adhesive Double-Lap Joints”. In: Douglas Aircraft Co. IRAD Technical Report MDC J036F. November 1969.
Harte, R.: Doppelt gekrümmte finite Dreieckselemente für die lineare und geometrisch nichtlineare Berechnung allgemeiner Flächentragwerke. In: Mitt. Nr. 82–10, Inst. Konstr. Ing.bau Ruhr-Univ., Bochum 1982.
Hartmann, A.; De Rijn, P.: “The Effect of teh Rigidity of the Glue Line on the Fatigue Strength of 2024-T Aluminium Alloy Speciments with an Adhesive-Bonded Reinforcing Plate on Both Sides”. In: National Aero-and Astronautical Research Institute.
Hartmann, W., Klenner, J.: Konstruktion der Tornado CFK-Toilerons MBB-Bericht: MBB/FE 212/KFK/PUB/3.
Haselmann, T. K.: Damping Synthesis from Substructure Tests. In: J.AIAA 14. 1976, 1409–1418.
Haselmann, T. K.: Method for Constructing a Full Modal Damping Matrix from Experimental Measurements. In: J.AIAA 10. 1972, 526–527.
Hashin, Z.: “Analysis of Properties of Fiber Composites with Anisotropic Constituents”. In: Journal of Applied Mechanics Vol. 46. Sept. 1979, 543–550.
Hashin, Z.; Rosen, W.: “The Elastic Moduli of Fiber-Reinforced Materials”. In: Journal of Applied Mechanics, Vol. 31. June 1964, 223 Errata, Vol. 32. 1965, 219.
Hashin Z. and Shtrikman, S.: “A Variational Approach to the Theory of the Elastic Behavior of Multiphase Materials”. In: Journal Mechanics and Physics of Solids. 1963, 127.
Hashin, Z.: “Assessment of the Self-Consistent Scheme Approximation - Conductivity of Particulate Composites”. In: Journal of Composite Materials, Vol. 2. 1968, 284.
Hashin, Z.: “On Elastic Behavior of Fiber-Reinforced Materials of Arbitrary Transverse Phase Geometry”. In: Journal of Mechanism and Physics of Solids, Vol. 13. 1965, 119.
Hashin, Z.: “Theory of Fiber Reinforced Materials”. In: National Aeronautics and Space Administration Contractors Report. 1974, 1972.
Hayes, L. J.: Practical Stability Test for Finite Elements with Reduced Integration. In: Int. J. Num. Meth. Eng. 17. 1981, 1689–1695.
Hennecke, E. G.; Reifsnider, K. L.: “Ultrasonic Testing Methods for Composite Materials”. In: Composite Technology Review, Vol. 1, No. 2. Winter 1979.
Heppler, G. R.; Hansen, J. S.: A Mindlin Element for Thick and Deep Shells. In: Comp. Meth. Appl. Mech. Eng. 54. 1986, 21–47.
Herakovich, C.T.: On the Relationship Between Engineering Properties and Delamination of Composite Materials. In: J. of Composite Materials, Vol 15. 1981, 336–348.
Hill, R.: “A Self-consistent Mechanics of Composite Materials”. In: Journal of Mechanics and Physics of Solids, Vol. 13. 1965, 213.
Hill, R.: “Theory of Mechanical Properties of Fiber-Strengthened Materials - Self Consistent Model”. In: Journal of Mechanics and Physics of Solids, Vol. 13. 1965, 189.
Hinton, E.; Campbell, J. S.: Local and Global Smoothing of Discontinuous Finite Element Functions using a Least Squares Method. In: Int. J. Num. Meth. Eng. 8. 1974, 461–480.
Hinton, E.; Scott, F. C.; Ricketts, R. E.: Local Least Squares Stress Smoothing for Parabolic Isoparametric Elements. In: Int. J. Num. Meth. Eng. 9. 1975,235–256.
Hofer, G.: Einfache und effiziente finite Elemente für 2D-, Schalen-und 3D-Spannungsberechnungen. Diss... TU Graz 1983.
Hoffmann, O.: “The Brittle Strength of Orthotropic Materials”. In: Journal of Composite Materials, Vol. 1. 1967, 200–206.
Howland, R. C. J.: “On Stresses in Flat Plates Containing Rivet Holes”. Proc. 3rd Int. Cong. of Applied Mech. Vol. II. 1930, 74–79.
Huang, H.-C.; Hinton, E.: A New Nine Node Degenerated Shell Element with Enhanced Membrane and Shear Interpolation. In: Int. J. Num. Meth. Eng. 22. 1986, 73–92.
Huang, H.-C.; Hinton, E.: A Nine Node Lagrangian Mindlin Plate Element with Enhanced Shear Interpolation. In: Eng. Comput. 1. 1984, 369–379.
Huang, H.-C.: Membrane Locking and Assumed Strain Shell Elements. In: Comp. Struct. 27. 1987, 671–677.
Hughes, T. J. R.; Cohen, M.: The “Heterosis” Finite Element for Plate Bending. In: Comp. Struct. 9. 1978, 445–450.
Hughes, T. J. R.; Liu, W. K.: Nonlinear Finite Elements Analysis of Shells - Part I: Threedimensional Shells. In: Comp. Meth. Appl. Mech. Eng. 26. 1981, 331–362.
Hughes, T. J. R.; Taylor, R. L.; Kanok-Nukulchai, W.: A Simple and Efficient Finite Element for Plate Bending. In: Int. J. Num. Meth. Eng. 11. 1977,1529–1543.
Humphreys, E. A.; Herakovich, C. T.: “Nonlinear Analysis of Bonded Joints with Thermal Effects”. Virginia Polytechnic Institute and State University Report VPI-E-77–19. June 1977.
Humphreys, E. A.: “Development on an Engineering Analysis of Progressive Damage in Composites During Low Velocity Impact”. In: Materials Science Corporation, NASA-CR-165778. 1981.
Hütter U.; Schelling H.; Krauss, H.: “An experimental study to determine the failure envelope of composite materials with tubular specimens under combined loads and comparison between several classical criteria”. Proc. AGARD Conf. N163. 1975.
Ioannides, E.; Grootenhuis, P.: A finite element analysis of the harmonic response of damped three-layer plates. In: J. of Sound a. Vibr. 67. 1979, 203–218.
Ioannides, E.; Grootenhuis, P.: An integral equation analysis of the harmonic response of three-layer beams.In: J.of Sound a Vibar.82. 1382,63–82.
Iosipescu, N.: “New Accurate Procedures for Single Shear Testing of Metals”. In: Journal of Materials, Vol. 2, No. 3. September 1967.
Javaherian, H.; Dowling, P. J.: Large Deflection Elastoplastic Analysis of Thin Shells. In: Eng. Struct. 7. 1985, 154–162.
Javaherian, H.; Dowling, P. J.: Nonlinear Finite Element Analysis of Shell Structures using the Semi-Loof Element. In: Comp. Struct. 12. 1980, 147–159.
Jirousek, J.: Comment on Evaluation of Shear Forces and Reactions from Transverse Shear Deformations by using Isoparametric Quadratic Mindlin Plate Elements. In: Comp. Struct. 19. 1984, 899–903.
Jonath, A. D.: “Some Novel Approaches to the Study of Adhesive Interface Phenomena and Bond Strength”, Structural Adhesives and Bonding, Proceedings of the Structural Adhesives and Bonding Conference, arranged by Technology Conferences Associates. March 1979.
Jones, D. I. G.: Damping of stiffened plates by multilayer treatments. In: J. of Sound a Vibr. 35. 1974.
Jones, D. I. G.: Temperature-frequency dependence of dynamic properties of damping materials. In: J. of Sound a Vibr. 1974, 451–470.
Jones, D. I. G.; Parin, M. L.: Nashif, A. D.: Parametric study of multiple-layer damping treatments on beams. In: J. of Sound a Vibr. 29. 1973, 423–434.
Jones, D. I. G.; Parin, M. L.: Technique for measuring damping properties of thin visocelastic layers. In: J. of Sound a Vibr. 24. 1972, 201–210.
Jones, R.M.; Morgan, H.S.: Analysis of Nonlinear Stess-Strain Behaviour of Fiber-Reinforced Composite Materials. In: AIAA Journal 15. 1977, 1669–1676.
Jurf, R. A.; Vinson, J. R.: “Effects of Moisture on the Static and Viscoelastic Properties of Epoxy Adhesives”. In: Journal of Materials Science. October, 1984. GO-
Kaminski, B. E.; Lantz, R. B.: “Strength Theories of Failure For Anisotropic Materials”. In: Composite Materials: Testing and design ASTM 460. 1969,160–169.
Kanok-Nukulchai, W.: A Simple and Efficient Finite Element for General Shell Analysis. In: Int. J. Num. Meth. Eng. 14. 1979, 179–200.
Kapur, A. D.; Nakra, B.; Chawla, D.: Shock response of viscoelastically damped beams. In: J. of Sound a Vibr. 55. 1977, 351–362.
Keer, L. M.; K. Chantaramungborn.: “Stress Analysis for a Double Lap Joint”. In: ASME Paper 75-APM-7. June 1975.
Kehl, K.: “Verfahren zur Bestimmung des Dämpfungsverhaltens anisotroper Verbundbauteile aus den Eigenschaften der Laminatkomponenten”. Dissertation am Institut für Luft-und Raumfahrt TU Berlin, erschienen als ILR-Bericht 41.
Kim, R. Y.; Whitney, J. M.: “Effect of Temperature and Moisture on Pin Bearing Strength of Composite Laminates”. In: Journal of Composite Materials. In: April 1976. 149–155.
Knauer, B.; Hönninger, H.; Reichelt E.: Faser-Teilchen-Verbunde. Akademie-Verlag Berlin. 1986.
Knappe, W.; Schneider, W.: “Bruchkriterien für unidirektionalen Glasfaser/Kunststoff unter ebener Kurzzeit-und Langzeitbeanspruchung”. Kunststoffe, Bd. 62. 1972, 864–868.
Knaust, U.: Zur Analyse und Optimierung von Faserverbund-Lechtbauteilen. Diss. D34, Fachbereich Maschinenbau der Universität-Gesamthochschule Kassel. 1988.
Knight, R. C.: “The Action of a Rivet in a Plate of Finite Breadth”. In: Philosophical Magazine Vol. 19, No. 127. March 1935.
Koiter, W. T.: A Consistent First Approximation in the General Theory of Thin Elastic Shells. Symp. Theory Thin Shells (I.U.T.A.M.). Amsterdam 1959,12–33.
Kuenzi, E.; Stevens, G. H.: “Determination of Mechanical Properties of Adhesives for Use in the Design of Bonded Joints”. U.S. Forest Service Research Note FPL-011. 1963.
Kuno, James K.: “Structural Adhesives Continue to Gain Foothold in Aero-space and Industrial Use”. Structural Adhesives and Bonding, Proceedings of the Structural Adhesives Bonding Conference, arranged by Technology Con-ferences Associates. El Segundo, California 1979.
Kutscha, D.; Hofer, K. E. Jr.: “Feasibility of Joining Advanced Composite Flight Vehicles”. AFML-TR-68–391. January 1969.
Kutscha, D.: “Mechanics of Adhesive-Bonded Lap-Type joints: Survey and Review”. AFML-TDR-64–298. December 1964.
Lakshminarayana, H.V.: Stress Distribution around a Semi-Circular Edge-Notch in a Finite Size Laminated Composite Plate under Uniaxial Tension. In: J. o. Comp. Mat. 17. 1983, 357.
Lalanne, M.; Paulard, M.; Trompette, P.: Response of thick structures damped by visocelastic material with application to layered beams and plates. Shock and Vibration Bulletin 45. 1975, 65–72.
Lee, S. W.; Dai, C. C.; Yeom, C. H.: a Triangular Finite Element for Thin Plates and Shells. In: Int. J. Num. Meth. Eng. 21. 1985, 1813–1831.
Lee, S. W.; Pian, T. H. H.: Improvement of Plate and Shell Element by Mixed Formulations. In: A.I.A.A. J. 16. 1978, 29–34.
Lee, Y.J., Lin, H.J., Lin, R.: Composite Structures 12.1989, 133–148; Composite Structures 13. 1989, 173–188.
Lehar, H.: Beitrag zur numerischen Behandlung ebener, anisotroper Schichtenverbunde mittels der Methode der Finiten Elemente. Diss... Universität Innsbruck 1984.
Lehar, H.; Moser, K.: Vorstellung einer leistungsfähigen Familie von finiten Elementen für gekoppelte Probleme mehrschichtiger Flächentragwerke. In: 19. AVK-Jahrestagung. Okt. 1984. Freudenstadt 1984.
Lehmann, G. M.; Hawley, A. V.: “Investigation of Joints in Advanced Fibrous Composites for Aircraft Structures”. In: AFFDL-TR-69–43, Vol. 1. June 1969.
Leonhardt, G.: Einfluß der Bettungssteifigkeit auf die Tragfähigkeit und Verformung von flexiblen Rohren, Straße-Brücke-Tunnel 3. 1972, 63.
Levy,M.:“Sur L´equilibrie Elastique d´une Plaque Rectangulaire”.In: Compt.Rend 129.1899,535–539.
Licha, O.: Unterschiede zwischen isotropen und anisotropen Spannungszuständen. In: Ing. Archiv, 52. 1982.
Linsenmann, D. R.: Stability of Plates of Composite Materials. MMAE THesis. University of Delaware. June 1974.
Liu, A. T.: “Linear and Elasto-Plastic Stress Analysis for Adhesive Lap Joints”. University of illionois T & AM Report 410. July 1976.
Lo, K. H.; Christensen, R. M.; Wu, E. M.: A higher-order theory of plate deformation, part 1: homogeneous plates; part 2: laminated plates. In: J. Appl. Mech., 44. 1977.
Lo, K. H.; Christensen, R. M.; Wu, E. M.: Stress Solution Determination for High Order Plate Bending Theory. In: Int. J. Solids Struct. 14. 1978, 655–662.
Lobett, J. W.; Rob, E. A.: “Thermo-Mechanical Analysis of Structural Joint Study”. WADD TR 61–151. January 1962.
Lu, Y.; Douglas, B.: On the forced vibrations of three-layer damped sandwich beams. In: J. of Sound a Vibr. 32.1974, 513–516.
Lu, Y.; Everstine, G.: More on finite element modeling of damped composite systems. In: J. of Sound a Vibr. 69. 1980, 199–205.
Lu, Y.; Killian, J.: A finite element modeling approximation for damping material used in constrained damped structures. In: J. of Sound a Vibr. 97. 1984, 352–354.
Lu, Y.; Killian, J.; Everstine, G.: Vibrations of three-layer damped sandwich plate composites. In: J. of Sound a Vibr. 64. 1979.63–71
Lunden, R., Akesson, B.: Pampes Second-Order-Rahleigh-Timoshenko Beam Vibration in Space - An Exact Complex Dynamik Member Stiffness Matrix. In: JNum.Meth.Engn. 19. 1983, 431–449.
Marin, J.: Theories of Strength for Combined Stresses and Non Isotropic Materials. In: J. of Aerospace Sciences, Vol. 24. 1957, 265–268.
Markus,S.:Shear-damoing reduction effects in sandwich beams.In: J.of Sound a Vibr.55 1977,591–59.
Markus, S.; Oraysky, V.; Simkova, O.:Damping properties of sandwich beams with local shearing prevention. In: Acustica 31. 1974, 132–138.
Markus, S.; Valaskova, O.: On eigenvalue boundary problems of transversely vibrating sandwich beams. In: J. of Sound a. Vibr. 23. 1972, 423–432.
Mau, S. T.; Tong, P.; Pian, T. H. H.: Finite element solutions for laminated thick plates. In: J. Comp. Mater., 6. 1972.
Mawenya, A. S.; Davies, J. D.: Finite element analysis of multilayer plates. In: hit. J. num. Meth. Engng., 8. 1974.
Mc Quillen, E. J., Gause, L. W.; Llorens, R. E.: Low velocity transverse normal impact of graphik composite Laminates. In: J. Composite Materials, Vol. 10. 1976 January, 76.
Mead, D. J.: A comparison of some equations for the flexural vibration of damped sandwich beams. In: J. of Sound a Vibr. 83. 1982, 363–377.
Mead, D. J.: Loss factors and resonant frquencies of encastre damped sandwich beams. In: J. of Sound a Vibr. 12. 1970, 99–112.
Mead, D. J.: The damping properties of elastically supported sandwich plate. In: J. of Sound a Vibr. 24. 1972, 275–295.
Mead, D. J.; Markus, S.: The forced vibration of a three-layer, damped sandwich beam with arbitrary boundary condition. In: Journal of Sound and Vibration 10. 1969, 163–175.
Meder, G.: Zur praktischen Berechnung linear-viskoelastischer Probleme. In: Rheol. Acta Vol. 20, Nr. 5. 1981, 517–525.
Meder, G.: Zur exakten und näherungsweisen Berechnung unidirektionalverstärkter Kunststoffe. In: Zeitschrift Werkstofftechnik, 12. 1981, 366–374.
Mindlin, R. D.: Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic Elastic Plates. In: J. Appl. Mech. 18. 1951, 31–38.
Mises, R. Von: “Mechanik der festen Körper im plastisch - deformablen Zustand”. In: Goettinger Nachrichten. Mathematisch, Physikalische Klasse, Vol. 1913, 204–218, 1913.
Moser, K.: Tragverhalten von Baugliedern aus verstärkten Kunststoffen. In: Kunststoffe 59, H. 12. 1969, 955–958.
Moser K.: Festigkeitslehre für verstärkte Kunststoffe. In: Ostern. Plastikverarbeiter, Hefte 10–12,1. 1969/70.
Moser K.: Stützstoffversteifte Faltwerke aus verstärkten Kunststoffen. In: IASS-Symposium Wien. 1970.
Moser K.: Glasfaserkunststoff GKF. In: Architektur aktuell, 5. Jhg.H.26. 1971, 19–20.
Moser K.: Kunststoffe im Bauwesen. In: Osten. Kunststoffzeitschrift 3.Jhg. 1972.
Moser K.: Konstruktive Kunststofftechnik im Bauwesen. In: Osten. Kunststoffzeitschrift 3. Jhg., Heft 9–12; 72.1972.
Moser K.; Stöffler G.: Seilabgespannter Kunststoffkamin aus GFK. In: Osten. Kunststoffzeitschr. 6. Jhg., H. 11, 12. 1975, 212.
Moser K.: Zum Kriechen zylindrischer GFK-Bauteile. In: IV. Budapest 75, VK im Maschinen-und KFZ-Bau. 1975, 353–366.
Moser K.; Swoboda G.; Pradlwarter H.: Der allg. zweiachsige anisotrope elastische Spannungszustand d. GFK-Mehrschichtverbundes. In: Schenk P 5936. Osten-. Kunststoffzeitschr. 7. Jhg. 1976, 159–162.
Moser K.: Bemessungsvorschlag f. d. Dimensionierung von Tragwerken aus verstärkten Kunststoffen. In: Freudenstadt, 13. AVK-Tagung in Freudenstadt. 1976.
Moser K.; Swoboda G.; Pradlwarter H.: Der Zweiachsige Biegebruch des GFK-Mehrschichtenverbundes. In: Freudenstadt, 13. AVK-Tagung in Freudenstadt. 1976, 10/1–10/5.
Moser K.; Stöffler G.: Beitrag zur Bemessung von erdverlegten flexiblen Rohren, Plaste und Kautschuk. In: 24. Jhg., Heft 7/. 1977.
Moser K.; Swoboda G.; Mall G.: Prüfung des interlaminaren Schubbruches von GFK-Werkstoffen. In: Schenk, Osten. Kunststoffzueitschr. 8. Jhg. 1977,147–152.
Moser K.; Swoboda G.: Explicit Stiffness Matrix of the Linearly Varying Strain Triangular Element. In: Computer & Structures, Vol. 8. 1978, 331–344.
Moser K.; Stöffler G.: Ermittlung der Bruchkennwerte eines Schleuderlaminates, Plaste und Kautschuk. In: 25. Jhg., Heft 9. 1978.
Moser K.: Einfluß interlaminarer Imperfektionen auf das Tragverhalten in GFP-Tragkonstruktionen, Verst. Plaste Dd, Plaste und Kautschuk, 26. Jhg. Heft 3 1979, 156–160.
Moser K.: Structural Application of New Materials. In: IABSE-Surveys. Nov. 1980, 15–80.
Moser K.; Swoboda G.: Zur Anwendung FE-Modelle bei erdgebetteten biegeweichen Rohren. In: ÖIAZ, Jhg. 124, Heft 8.1980, 282–286.
Moser K.; Lutz G.: Einsatz v. Kohlenstoffasem beim Sanieren v. einbetonierten GF-UP-Druckrohrleitungen. In: Baden-Baden, VDI-Verlag Düsseldorf (s.Bem.). 1981, 259–266.
Moser K.: Verarbeiten und Anwenden kohlenstoffaserverstärkter Kunststoffe (Podiumsdiskussion). In: VDI-Tagung, Kunststoffe-Plastics, 28. Jhg. 1981, 13–19.
Moser, K.; Lehar, H.: Theorien und FE-Ansätze für Plattentragwerke mit geschichtetem Aufbau. In Verstärkte Plaste ‘82. Berlin (Ost) 1982.
Moser K.; Lutz G.: Die Problematik der Dimensionierung und der Festlegung der Sicherheit. In: Freudenstadt, 18. AVK-Tagung in Freudenstadt. 1982, 36/1–36/4.
Moser K.: Die Sicherstellung d. Gleichmaßes v. Ingenieurkennwerten b. einer “Werkstoffkonstruktion”. In: ÖNORM B5161, ONORM-Zeitschrift, 37. Jhg. H. 11. 1983, 121–122.
Moser K.: Konstruieren mit Faser “Kunststoff” Verbund - eine Herausforderung an d. Kunststoff-Technik. In: MARK-Sympos., Chemie-Zeitschrift 11. 1984.
Moser K.: Die Bedeutung der Theorie d. Schichtenverbundes f. LeichtbauVerbundkonstr. auf polym. Basis. In: Verstärkte Plaste, Berlin. 1984.
Moser K.; Lehar Hermann: Vorstellung eines leistungsfähigen FE für gekoppelte Probleme mehrsch. In: Flächentragwerke, 19. AVK-Tagung Freudenstadt. 1984.
Moser K.: Tragende Konstruktionen aus verstärkten Kunststoffen. In: Osten. Hochschulzeitung,.1985.
Moser K.: Berechnen und Dimensioneren von Faser-Polymer-Verbund-Bauteilen. In: TU-Dresden, Problemseminar WeiBig. 1985.
Moser K.: Zur Herausgabe der neuen VDI-Richtlinien 2014 “Entwickeln von Bauteilen aus FKV”. In: Composites, 25. Chemiefasertagung Dornbirn. 1986,461–469.
Moser K.; Lehar Hermann; Schmid Alfred: About the Analysis of Laminated composite Structures. In: INTES Stuttgart, FE in Engineering Aplications. 1987, 395–416.
Moser K.: Zur Beurteilung d. Zuverlässigkeit v. tragenden SV-Konstruktionen mit polymerer Matrix. In: CSSR, Verstärkte Plaste ´87 Karlsbad. 1987.
Moser K.: Bauteile aus neuen Werkstoffen. In: ÖNORM B4040, ÖIAZ, 132. Jhg. Heft 9. 1987, 292–297.
Moser K.; Schmid Alfred: About the Analysis of Laminated Composite Structures. In: Novi Sad, Yug., Conference of FRC, Novi Sad. 1987.
Moser K.; Mader Josef: Probleme bei Versuchen mit Hochleistungs-Zuggliedern aus Faser-Polymer-Verbunden. In: TU-Dresden, Mikrosymposium Dresden. 1987.
Moser, K.; Lumassegger, M.: Increasing the Damping of Flexural Vibrations of Laminated FPC Structures by Incorporation of Soft Intermediate Plies with Minimum Reduction of Stiffnes. In: Composite Structures 10. 1988, 321–333.
Moser K.: Verfügbare Berechnungsgrundlagen für eine Lebensdauer-Vorausberechnung. In: DDR, Verstärkte Plaste Berlin. 1988.
Moser K.: Neue Verbundwerkstoffe. In: Deutscher Ing.-Kalender. 1988, 239–254.
Moser K.: Zur Berechnung von Membranen und biegesteifen Bauteilen aus Faser-Kunststoff-Verbund. In: Bremerhaven, Kunststoffe im Boots-u. Schiffbau. 1988,179–204.
Moser, K.; Lumassegger, M.: Weiche Zwischenschichten erhöhen die Dämpfung von Verbundwerkstoffen. Auslegen von geschichteten FaserKunststoff-Verbundstrukturen mit Dämpferschichten unter Berücksichtigung eines möglichst geringen Steifigkeitsabfalles. In: Kunststoffe 78. (1988)8, 701–704 (in deutscher und englischer Fassung). Englische Fassung in: Contents 8/88, 20–22. Carl Hauser Verlag. Münschen 1988.
Moser, K.; Lumassegger, M.; Haussteiner, G.: Modellmäßige Formulierung von Schichtenverbunden für dynamische Berechnungen auf der Basis der Finite - Elemente - Methode. Tragende Konstruktionen aus Verstärkten Polymeren II. Mikrosymposium vom 6./9. Nov. 1987 in Dresden (WTZ Abkommen DDR - Österreich). Eigenverlag Dresden 1988.
Moser K.; Schmid Alfred: Composite Structures-Modelling, Finite Element Analysis and Evalution. In: Composite Structures Vol. 11Nol. 1989, 33–56.
Moser, K.; Stroh Nikolaus: Different Shear Stresses on FPC and their Experimental Determination. In: Composite Structures 6, Proceedings of the 6th International Conference. 1991, 787–798.
Moyer, E. T.: A brief Note on the “Local Least Squares” Stress Smoothing Technique. In: Comp. Struct. 18. 1984, 185–187.
Mukhopadhyay, A.; Kingsbury, H.: On the dynamic response of a rectangular sandwich plate with viscoelastic core and generally orthotropic facings. In: J. of Sound a Vibr. 47. 1976, 347–358.
Murphy, M. M.; Lenoe, E. M.: “Stress Analysis of Structural Joints and Interfaces-A Selective Annotated Bibliography”. In: AMMRC Manuscript AMMRC MS 74–10. Sept. 1974.
Nagendra, G.K.; Fleury, C.: Sensitivity and Optimization of Composite Structures using MSC/NASTRAN. 147–166.
Nakra, B. C.:Grootenhuis, P.:Structural damping using a four-layer sand-wich.In: J.of Engineering for Industry. Feb.1972,81–85.
Nelson, W. D. et al.: “Composite Conceptual Wing Design”. In: AFML-TR73–57. March 1973.
Niederstadt, G.: Kritische Betrachtung zur Berechnung und Gestaltung gewickelter Behälter aus GFK. Kunststoff-Rundschau, H. B. August 1971.
Niederstadt, G.: Kriterien und Beispiele für die Wahl von Verbundwerkstoffen mit Fasern hoher spezifischer Eigenschaften. Kohlenstoff-und Aramidfaserverstärkte Kunststoffe.
Niederstadt, G.: Prüfung und Auswahl moderner Verbundwerkstoffe mit C-Faserverstärkung. In: Kunststoffberater 11/12. 1983, 25–27.
Nielson, L. E.: Mechanical Properties of Polymers and Composites. Marcel Dekker. 1974.
Nonhoff, G.: Ein Beitrag zur Stabilitätsberechnung und Prüfung von Zylinderschalen aus glasfaserverstärkgem Kunststoff unter gleichmäßigem Außendruck. DS 7207, RWTH. Aachen 1972.
Noor, A. K.; Mathers, M. D.: Finite element analysis of anisotropic plates. In: Int. J. num. Meth. Engng., 11. 1977.
Norris, C. B.: Strength of Orthotropic Materials Subjected to Combined stress. In: Forest Products Laboratory Report 1816. 1950, 1962.
Noyes, J. V.: Composite in the Construction of the Lear Fan 2100 Aircraft. In: Composites 14/1983, 129–130.
Och, F.; Gecks, M.: Schichtweise Bruchanalyse vür die Schwingfestigkeit von Faserverbunden. DGLR-Symposium “Ermüdungsfestigkeit von Flugzeugen und modernen Bauweisen”. Darmstadt 5./7.10.1982.
Ojalvo, I.: “Survey of Mechanically Fastened Splice Joint Analysis”. In: Fourth Army Materials Technology Conference. 1975.
Olivera, E. R. A.: Theoretical foundations of the finite element method. In: Int. J. Sol. Struct., 4. 1968.
Oplinger, D. W.; Gandhi, K. R.: “Analysis Studies of Structural Performance in Mechanically Fastened Fiber-Reinforced Plates”. Proceedings of the Army Symposium on Solid Mechanics, (AD 786–543). September 1974.
Oplinger, D. W.; Gandhi, K. R.: “Stresses in Mechanically Fastened Orthotropic Laminates”. Proceedings of 2nd Conference on Fibers, Composites and Flight Vehicle Design, AFFDL-TR-74–103. Sept. 1974, 811–842.
Oplinger, D. W.: “Stress Analysis of Composite Joints”. Proceedings of the Fourth Army Materials Technology Conference-Advances in Joining Technology. September 1975.
Oraysky, V.; Markus, S.; Simkova, O.: A new approximate of finding the loss factors of a sandwich cantilever,. In: J. of Sound a. Vibr. 33.1974), 335–352.
Owen, D. R. J.; Figueiras, J. A.: Anisotropic Elasto-Plastic Finite Elements Analysis of Thick Plates and Shells. In: Int. J. Num. Meth. Eng. 19. 1983, 541–566.
Padawer, G. E.: “Film Reinforced Multifastened Mechanical Joints in Fibrous Composites”. In: AIAA Journal of Aircraft, Vol. 10, No. 9. September 1973.
Padawer, G. E.: “The Strength of Bolted Connections in Graphite/Epoxy Composites Reinforced by Colaminated Boron Film”. In: Composite Materials: Testing and Design, ASTM STD 497.
Pagano, N. J.; Pipes, R. Byron: The Influence of Stacking Sequence on Laminate Strength. In: J. Composite Materials. January 1971, 50–57.
Pagano, N. J.: Exact solutions for composite laminates in cylindrical bending. In: J. Comp. Mater., 3. 1969.
Pagano, N. J.: Exact solutions for rectangular bidirectional composites and sandwich plates. In: J. Comp. Mater., 4. 1970.
Pagano, N. J.; Hatfield, S. J.: Elastic behavior of multilayered bidirectional composites. In: AIAA J., 10. 1972.
Pagano, N. J.; Wang, A. S. D.: Further study of composite laminates under cylindrical bendin. In: J. Comp. Mater., 5. 1971.
Panda, S. C.; Natarajan, R.: Finite Element Analysis of Laminated Composite Plates. In: Int. J. Num. Meth. Eng. 14. 1979, 69-.
Panda, S. C.; Natarajan, R.:Finite element analysis of laminated composite plates. In: Int. J. num. Meth. Engng., 14. 1979.
Pardhan, B.; Kumar, R.: Stresses around Partial Contact Pin-Loaded Holes in FRP Composite Plates. In: J. o. Reinforced Plastics and Composites, 3. 1984, 69–84.
Parisch, H.: A Critical Survey of the 9-Node Degenerated Shell Element with Special Emphasis on Thin Shell Application and Reduced Integration. In: Comp. Meth. Appl. Mech. Eng. 20. 1979, 323–350.
Paul, B.: “Prediction of Elastic Constants of Multiphase Materials”. In: Transactions of the Metallurgy Society of AIME, Vol. 218. 1960, 36.
Petersen, Ch.: “Nachweis zylindrischer Bauwerke, insbesondere stählemer Kamine, gegen Körmön’sche Querschwingungen”. In: Die Bautechnik 50. April 1973, 109–114.
Pipes, R. B.; Vinson, J. R.; Chou, T. W.: “On the Hygrothermal Response of Laminated Composite Systems”. In: Journal of Composite Materials. April 1976, 130–148.
Pipes, R. Byron; Daniel, I. M.: Moiré Analysis of the Interlaminar Shear Edge Effect in Laminated Composites. In: J. Composite Materials. April 1971, 255–259.
Pipes, R. Byron; Pagano, N. J.: Interlaminar Stresses in Composite Laminates Under Uniform Axial Extension. In: J. Composite Materials. October 1970, 538–548.
Pister, K. S.; Dong, S. B.: Elastic Bending of Layered Plates. In: J. Eng. Mech. Div., ASCE. October 1959, 1–10.
Prathrap, G.; Viswanath, S.: On Optimally Integrated Four-Node quadrilateral Plate Bending Element. In: Int. J. Num. Meth. Eng. 19. 1983, 831–840.
Pritz, T.: Analysis of errors in investigating the complex moduls of viscoelastic materials by the coated beam method. In: J. of Sound a Vibr. 60. 1978.
Pritz,T.: Choice of thickness ratio of a coated beam used for investigating the complex modulus of viscoelastic materials. In: J.of Sound a Vibr. 66. 1979.
Prokhorow,B.F.:“Joints Used in Plastic and Composite Shipboard Super-structures, Deckhouses, Light Bulkheads,and Enclosures”. In: Sudostroyenlye,#9,1965, U.S. Department of the Navy Translation No. 2076-b.:44–51.
Pryor, C. W.; Barker, R. M.: A finite element analysis including transverse shear effects for applications to laminated plates. In: AIAA J., 9. 1971.
Puck, A.: Festigkeitsberechnung an Glasfaser/Kunststoff-Laminaten bei zusammengesetzter Beanspruchung. In: Kunststoffe Bd. 59. 1969, 780–787.
Puck, A.: Zur Beanspruchung und Verformung von GFK-Mehrschichtenverbund-Bauelementen. Teil 1–2. In: Kunststoffe Bd. 57. 1967, 284–293, 573–582, 965–973.
Puck, A.; Schürmann, H.: Die Zug/Druck-Torsionsprüfung an rohrförmigen Probekörpern. In: Kunststoffe Bd 72. 1982, 554–561.
Puck, A.: Zum Deformationsverhalten und Bruchmechanismus von unidirektionalem und orthogonalem Glasfaser-Kunststoff. In: Kunststoffe 12/65, 913–921.
Puck, A.: Zur Beanspruchung und Verformung von GFK-Mehrschichtenverbund - Bauelementen, Teil 1 und 2. In: Kunststoffe 4/1967, 284–294 und 7/1967, 573–582.
Puck, A.: Das “Knie” im Spannungs-Dehungs-Diagramm und RiBbildung bei GFK. In: Kunststoffe Bd. 58, Heft 12. 1968, 886–893.
Puck, A.; Schneider, W.: On Failure Mechanism and Failure Criteria of Filament-Wound Glass-Fibre/Resin, Composites, Plastics and Polymers 37, 127, 33–44.
Pugh, E. D. L.; Hinton, E.; Zienkiewicz, O. C.: A Study of Quadrilateral Plate Bending Elements with “Reduced” Integration. In: Int. J. Num. Meth. Eng. 12. 1978, 1059–1079.
Quinn, W. J.; Matthews, F. L.: “The Effect of Stacking Sequence on the Pin-Bearing Strength of Glass Fiber Reinforced Plastics”. In: J. Composite Materials, Vol. 11. April 1977, 139–145.
Rajaiah, K. and Naik, N.K.: Quasi-Rectangular Holes with Minimum Stress Concentration in Orthotropic Plates. In: J. o. Reinforced Plastics and Composites, 2. 1983, 164–177.
Rao, D. K.: Vibration of short sandwich beams. In: J. of Sound a Vibr. 52.1977), 253–263.
Reddy, J. N.: A penalty plate-bending element for the analysis of laminated anisotropic composite plate. In: Int. J. num. Meth. Engng., 15.1980.
Rao, K. P.: A Rectangular Laminated Anisotropic Shallow Thin Shell Finite Element. In: Comp. Meth. Appl. Mech. Eng. 15. 1978, 13–33.
Reddy, J. N.: “Analysis of Layered Composite Plates Accounting for Large Deflections and Transverse Shear Strains”. Recent Advances in Nonlinear Computational Mechanics. In: Pine Ridge Press. 1981.
Reddy, J. N.; Bert, C. W.: “On the Behavior of Plates Laminated of Bimodulus Composite Materials”. In: VPI & SU Report VPI-E-81–11 and OUAMNE-81–1. April 1981.
Reddy, J. N., “Survey of Recent Research in the Analysis of Composite Plates”, Composite Technology Review. 1982.
Reddy, J. N.: Bending of Laminated Anisotropic Shells by Shear Reformable Finite Element, Fibre Science Techn. 17 (1982), 9–24.
Reddy, J. N.; Chao, W. C.: A comparison of closed-form and finite-elemlent solutions of thick laminated anisotropic rectangular plates, Nuclear Engineering an Design, 64 (1981).
Reinhart, T. J., Jr., “Evolution of Structural Adhesives”, Structural Adhesives and Bonding, Proceedings of the Structural Adhesives and Bonding Conference arranged by Technology Conferences Associates, (March 1979).
Reissner, E.: The Effect of Transverse Shear Deformation on the Bending of Elastic Plates, J. Appl. Mech. 12 (1945), 69–77.
Reissner, E., and Y. Staysky: Bending and Stretching of Certain Types of Heterogeneous Aelotropic Elastic Plates, J. Appl. Mech., September, 1961, pp. 402–408.
Renton, W. J. and J. R. Vinson, “On the Behavior of Bonded Joints in Composite Materials Structures”, Journal of Engineering Fracture Mechanics, Vol. 7. (1975): 41–60.
Renton, W. J. and J. R. Vinson, “Analysis of Adhesively Bonded Joints Between Panels of Composite Materials”, Journal of Applied Mechanics. (April 1977): 101–106.
Renton, W. J. and J. R. Vinson. “Fatigue Behavior of Bonded Joints in Composite Materials Structures”, AIAA Journal of Aircraft, Vol. 12, No. 5. (May 1975): 442–447.
Renton, W. J. and J. R. Vinson. “Fatigue Response of Anisotropic Adherend Bonded Joints”, AMMRC MA-74–8. (September 1974).
Renton, W. J. and J. R. Vinson. “The Analysis and Design of Anisotropic Bonded Joints. Report No. 2”. AFOSR TR-75–0125 (August 1974).
Renton, W. J. and J. R. Vinson. “The Analysis and Design of Composite Material Bonded Joints Under Static and Fatigue Loadings”, AFOSR TR 731627, (August 1973).
Renton, W. J. and J. R. Vinson. “The Efficient Design of Adhesive Bonded Joints”, Journal of Adhesion, Vol. 7. (1975): 175–193.
Renton, W. J. and W. B. Jones, Jr., “Instrumented Test Methods for Adhesively Bonded Joints”, Proceeding of the 10th SAMPE Technical Conference. (October 1978).
Renton, W. J., D. L. Flaggs and J. R. Vinson. “The Analaysis and Design of Composite Materials Bonded Joints, Report No. III”. AFOSR-TR-781512, (1978).
Renton, W. J., J. Pajerowski, and J. R. Vinson. “On Improvement in Stur-cutral Efficiency of Single Lap Bonded Joints”, Proceedings of the Fourth Army Materials Technology Conference-Advances in Joining Technology, (September 1975).
Renton, W. J., “The Symmetric Lap Joints - What Good is it? ” Society of Experimental Stress Analysis Journal (May 1976).
Renton, W. J. and J. R. Vinson, “Shear Property Measurements of Adhesives in Composite Material Bonded Joints”, ASTM 580. (1975): 119–132.
Reuter, R. C.: Concise property transformation relations for anisotropic lamina, J. Comp. Mater., 5 (1971)
Riessland, B.; Haugeneder, E.:Zur Glaättung unstetiger Schnittkraftverläufe bei der Berechnung von Schalentragwerken mittels der Methode der Finiten Elemente, Bauingenieur 58 (1983), 27–33.
Rutherford, J. L., F. C. Bossier, and E. J. Hughes, “Capacitance Mehtods for Measuring Properties of Adhesives in Bonded Joints”, Rev. Scientific Inst., Vol. 39, No. 5.: 666–671.
Rybicke, E.F. and Scumueser, D.W.: Effect of Stacking Sequence and LayUp-Angle on Fee Edge Stresses around a Hole in a Laminated Plate and Tension. J.o. (1978), p. 300–313.
Sadasiva Rao, Y. V. K.: Vibrations of a dual core sandwich beam, J. of Sound a Vibr. 32 (1974), S175–187.
Sadasiva Rao, Y. V. K.; Nakra, B. C.: Theory of vibratory bending of unsymmetrical sandwich plates, Archives of Mechanics 25 (1973), S213–225.
Sadasiva Rao, Y. V. K.; Nakra, B. C.: Vibrations of unsymmetrical sandwich beams and plates with visocelastic cores, J. of Sound a. Vibr. 34 (1974), S309–326.
Saigal, S; Kapania, R. K.; Yang, T. Y.: Geometrically Nonlinear Finite Element Analysis of Imperfect Laminated Shells, J. Compos. Mater. 20 (1986), 197–214.
Sainsbury, M. G.: Experimental and theoretical techniques for the vibration analysis of damped complex structures, PhD Thesis Univ. London.
Sandhu, R. S. “A Survey of Failure Theories of Isotropic and Anisotropic Material”, AFFDL-TR-72–71, Wright Patterson Air Force Base, Dayton, Ohio, 1972.
Sawyer, J. W. and P. A. Cooper, “Analysis and Test of Bonded Single Lap Joints with Preformed Adhesives”, AIAA Paper 80–0773. (1980).
Schapery, R. A., “Thermal Expansion Coefficients of Composite Materials Based on Energy Principle”, Journal of Composite Materials, Vol. 2, No. 3, 1968, p. 380.
Schladitz, H. J.: Über einige Eigenschaften von polykristallinen Metallfäden. Zeitschrift für Metallkunde, B. 59, H. 1, S18–22, 1968.
Schmidt, Lucien A.,Jr.:The Structural Synthesis Concept and Its Potential Role in Design with Composites, in F. W. Wendt, H. Liebowitz, and N. Perrone (eds.), “Mechanics of Composite Materials”, Proc. 5th Symp. Naval Structural Mechanics, 1967, Pergamon, New York, 1970, pp. 553–582.
Schulz, U.: Zur Beulstabilität anisotroper Zylinderschalen aus GFK, Bauingenieur, Berlin/W., 47 (1972) 5.
Scordelis, A. C.; Lo, K. S.: Computer Analysis of Cylindrical Shells, J. Amer. Concr. Inst. 61 (1964), 539–561.
Sen, J. K., “Stress Analysis of Double-Lap Joints Bonded with a Viscoelastic Adhesive”, Ph. D. Dissertation, Southern Methodist University. (May 1977).
Sharpe, W. N. and Muha, T. J., “Comparison of Theoretical and Experimental Shear Stress in the Adhesive Layer of a Lap Joint Model”, Proceedings of the Army Symposium of Solid Mechanics, AMMRC 74–9 (1974): 23–41.
Shen, C. and G. S. Springer, “Moisture Absorption and Desorption of Composite Materials”, Journal of Composite Materials, Vol. 10, January 1976, p. 2–20.
Skupin, L.: Sicherheit von Konstruktionen aus Glasfaser-Kunststoffen. AVK-Jahrestagung Freudenstadt, 30.9.-3.10.1969.
Sloan, J. G. and J. R. Vinson, “The Behavior of Rectangular Composite Material Plates Under Lateral and Hygrothermal Loads”, ASME Paper 78 WA/Aero 5, AFOSR TR-78–1477 (1978).
Sloan, J. G. “The Bahavior of Rectangular Composite Material Plates Under Lateral and Hygrothermal Loads”, MMAE Thesis, University of Delaware, 1979.
Smith, A. P., “The Effect of Transverse Shear Deformation on the Elastic Stability of Orthotropic Plates Due to In-plane Loads”. MMAE Thesis, University of Delaware, 1973.
Soni, M. L.; Kluesener, M. F.; M.L. Drake: Damping Synthesis and Dampded Design for Flexibel Spacecraft Structures, Comp. & Struct. 1965
Srinivas, S., “Analysis of Bonded Joints”,NASA TN D-7855,(N75–21673) (April 1975).
St. Venant, B. De: “Memoire sur les equations generales des mouvements interieurs des corpes solides ductites an dela des limites ou l’elasticite pourrait des ramener a leur premier etat ” Comptes Rendus, Paris, France, Vol. 70, pp. 473–480, 1870.
Stenersen, A. A.: “Polymide Adhesives for the Space Shuttle”, Structural Adhesives and Bonding, Proceedings of the Structural Adhesives and bonding Conference, arranged by Technology Conference Associates. (March 1979).
Stockdale, J. H. and Matthews, F. L.: “The Effect of Clamping Pressure on Bolt Bearing Loads in Glass Fibre-Reinforced Plastics”, Composites, (January 1976): 34–38.
Stolarski, H.; Belytschko, T.: Membrane Locking and Reduced Integration for Curved Elements, J. Appl. Mech. 49 (1982), 172–176.
Stolarski, H.; Belytschko, T.: Shear and Membrane Locking in Curved C0-Elements, J. Appl. Mech. 51(1983), 279–296.
Stowell, E. Z. and Liu, T. S., “On the Mechanical Behavior of Fiber Reinforced Crystalline Solids”, Journal of the Mechanics and Physics of Solid, Vol. 9, pp. 242–260, 1961.
Strang, G.; Fix, G. J.: An Analysis of the Finite Element Method, Prentice-Hall, Englewood Cliffs, New Jersey 1973.
Surana, K. S.: Geometrically Nonlinear Formulation for the Curved Shell Elements, Int. J. Num. Meth. Eng. 19 (1983), 581–615.
Switzky, H., M. J. Forray, and Newman, M.: “Thermo-Structural Analysis Manual”, WADD TR 60–517, (September 1960).
Szepe, F., “Strength of Adhesive-Bonded Lap Joints with Respect to Temperature and Fatigue ” Experimental Mechanics, Vol. 6 (1966): 280–286.
Taylor, R. L.: On Completeness of Shape Functions for Finite Element Analysis, Int. J. Num. Meth. Eng. 4 (1972), pp 17 ff.
Taylor, R. L.; Simo, J. C.; Zienkiewicz, O. C.; Chan: The Patch Test - A Condition for Assessing FEM Convergence, Int. J. Num. Meth. Eng. 22 (1986), 39–62.
Theocaris, P.: “The Stress Distribution in a Strip Loaded in Tension by Means of a Central Pin”, ASME Journal of Applied Mechanics, (March 1956): 85–90.
Thomas, G. R.; Gallagher, R. H.: A Triangular Thin Shell Finite Element: Linear Analysis, NASA CR-2482, Washington D.C. 1975.
Thrall, E. W., Jr.: “An Overview of the PABST Program”, Structural Adhesives and Bonding, Proceedings of the Structural Adhesives and Bonding Conference arranged by Tehnology Conferences Associates, (March 1979).
Tresca, H. “Memoire sur l’écoulement des corps solides soumis a de fortes pressions”, Comptes Rendus, Paris France, Vol. 59, p. 754, 1864.
Trompette, P.; Boillot, D.; Ravanel, M.: The effect of boundary conditions on the vibration of a viscoelastically damped cantilever beam, J. of Sound a Vibr. 60 (1978), S345–350.
Tsach, U.: Locking of Thin Plate/Shell Elements, Int. J. Num. Meth. Eng. 17 (1981), 633–644.
Tsai, S. W., Adams, D. F. and Doner, D. R.: “Effect of Constituent Material Properties on the Strength of Fiber-Reinforced Composite Materials”, AFML-TR-66–190, Air Force Materials Laboratory, 1966.
Tsai, S. W., Halpin, J. C., Pagano, N. J.: Composite Materials Workshop, Technomic, 1968.
Tsai, S. W., “Structural Behavior of Composite Materials”, NASA CR-71, July, 1964, National Aeronautic and Space Administration CR-71.
Tsai, S. W. und Wu, E. M.: “A General Theory of Strength for Anisotropic Materials”, Jl. Composite Materials, Vol. 5, pp. 58–80, 1971.
Tsai, Stephen W., and Nicholas J. Pagano: Invariant Properties of Composite Materials, in S. W. Tsai, J. C. Halpin, and Nicholas J. Pagano (eds.), “Composite Materials Workshop”, Technomic Publishing Co., Stamford, Connecticut, 1968, pp. 233–253. Also AFML-TR-67–349, March, 1968.
Tsai, Stephen W., Donald F. Adams, and Douglas R. Doner: Analysis of Composite Structures, NASA CR-620, November, 1966.
Tsai, Stephen W.: Stephen Characteristics of Composite Materials,NASR CR-224, April, 1965.
Tsai, Stephen W.: Strength Theories of Filamentary Structures, in R. T. Schwartz and H. S. Schwartz (eds.), “Fundamental Aspects of Fiber Reinforced Plastic Composites”, Wiley Interscience, New York, 1968.
Tsai, Stephen W.: Structural Behaviour of Composite Materials, NASA CR-71, July, 1964.
Ungar, E.: Lossfactors of viscoelastically damped beam structures, J. of the Acoustical Society of America 34 (1962).
Van Siclen, Robert C., “Evaluation of Bolted Joints in Graphite/Epoxy”, Proceedings of the Army Symposium on Solid Mechanics, September 1974, (AD 786543): 120–138.
Venkatesh, A.; Rao, K. P.: A Doubly Curved Quadrilateral Finite Element for the Analysis of Laminated Anisotropic Thin Shells of Revolution, Comp. Struct. 12 (1980), 825–832.
Vinson, J. R. and Brull, M. A., “New techniques of Solutions of Problems in Orthotropic Plates”, Transactions of the Fourth United States Congress of Applied Mechanics, 1962.
Vinson, J. R. and J. R. Zumsteg, “Analysis of Bonded Joints in Composite Materials Structures Including Hygrothermal Effects”, AIAA Paper 79–0798, (1979).
Vinson, J. R. and Shore, S., “A Method for Weight Optimization of Flat Truss-Core Sandwich Panels Under Lateral Loads”, U.S. Naval Air Engineering Center Technical Report NAEC-ASL-1111, (1967).
Vinson,J. R. and Shore,S., “Bibligraphy on Methods of Structural Optimization of Flat Sandwich Panels”, U.S. Naval Air Engineering Center Technical Report NAEC-ASL-1082, (1965).
Vinson,J. R. and Shore,S., “Design Procedures for the Structural Optimization of Flat Sandwich Panels”, U.S. Naval Air5 Engineering Center Technical Report NAEC-ASL-1084, (1965).
Vinson,J.R. and Shore,S., “Structural Optimization of Corrugated Core and Web-Core Sandwich Panels Subjected to Uniaxial Compression”. U.S. Naval Air Engineering Center Technical Report NAEC-ASL-1109, (1967).
Vinson, J. R. and Shore, S., “Structural Optimization of Flat, Corrugated Core and Compressive and In-Plane Shear Loads”, U.S. Naval Air Engineering Center Technical Report NAEC-ASL-1110, (1967).
Vinson, J. R., “New Techniques of Solutions for Problems in Orthotropic Plates”, Ph. D. Dissertation, University of Pennsylvania, 1961.
Vinson, J. R. “On the State of Technology in Adhesively Bonded Joints in Composite Material Structures”. Emerging Technologies in Aerospace Structures, Designs, Structural Dynamics and Materials, ASME (1980).
Vinson, J. R., Walker, W. J., Pipes, R. B., and Ulrich, O. R. “The Effects of Relative Humidity and Elevated Temperatures on Composite Structures”, Air Force Office of Scientific Research Technical Report 77–0030, February 1977.
Vinson, J. r. and Shore, S., “Methods of Structural Optimization for Flat Sandwich Panels”, U.S. Naval Air Engineering Center Technical Report NAEC-ASL-1083, (1965).
Vlasov, V. Z.: General Theory of Shells and its Application in Engineering, NASA TT F-99, 1964, 495–514.
Volkersen, O. “Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten”, Luftfahrtforschungen, 15, (1983): 41–47.
Waddoups, M. E. Advanced Composite Material Mechanics for the Design and Stress Analyst, General Dynamics, Ft. Worth, TX, Report FZM-4763, 1967.
Wang, D. Y., “The Effect of Stress Distribution on the Fatigue Behavior of Adhesive Bonded Joints”, ASD-TDR-63–93, AFML. (July 1963).
Warburton, G., “The Vibration of Rectangular Plates”, Proceedings of the Institute of Mechanical Engineers, 168, 371 (1954)
Waszczak, J. P. and T. A. Cruse, “Failure Mode and Strength Prediction of Anisotropic Bolt Bearing Speciments”, J. Composite Materials, Vol. 5 (1971): 421–25.
Waszczak, J. P. and T. A. Cruse.“A Synthesis Procedure for Mechanically Fastend Joints in advanced Composite Materials”, AFML-TR-73–145,Vol.II, (AD 771 795). (September 1973).
Wetherhold, R. C. and J. R. Vinson: “An Analytical Model for Bonded Joint Analysis in Composite Structures Including Hygrothermal Effects”, AFOSR TR 78–1337. (1978).
Whang, B.: Laminated Orthotropic Plates and Shallow Shells, Comp. Struct. 1 (1971), 493–495.
Whitney, J.M.; Daniel, I.M.; Pipes, R.B.: Experimental Mechanics of Fiber Reinforced Composite Materials. SESA Monograph No. 4, 1982.
Whitney, J. M. and Riley, M. B.: “Elastic Properties of Fiber Reinforced Composite Materials”, Journal of AIAA, Vol. 4, 1966, p. 1537.
Whitney, J. M., “Geometrical Effects of Filament Twist on the Modulus and Strength of Graphite Fiber-Reinforced Composite”, Textile Research Journal, September 1966, p. 765.
Whitney, J. M., “The Effect of Transverse Shear Deformation on the Bending of Laminated Plates”, Journal of Composite Materials, Vol. 3, (July 1969).
Whitney, J. M.: Shear Correction Factors for Orthotropic Laminates under Static Load, J. Appl. Mech., Transactions ASME 1973, 302–304.
Whitney, J. M.: Stress Analysis of Thick Laminated Composite and Sandwich Plates, J. Compos. Mater. 6 (1972), 426–440.
Whitney, J. M.; Pagano, N. J.: Shear Deformation in Heterogeneous Anisotropic Plates, J. Appl. Mech., Transactions ASME 37 (1970), 1031–1036.
Whitney, J. M.; Sun, C. T.: A higher order theory for extensional motion of laminated composites, J. Sound Vib., 30 (1973)
Wiedemann, J., Kehl, K.: Dämpfung schwingender GFK-Zylinder
Wiedemann,J.: Berechnung und Modellierung des Dämpfungsverhaltens orthotroper Schichtlaminate, Vortrag zur 13. öffentl. Jahrestagung der AVK (1976)
Wiedemann,J.:Elastizität und Festigkeit von Bauteilen aus GFK, S.35–43. P.Puck, Einführungen in das Gestalten und Dimensio-nieren,S.44–66.
Wiedemann, J.; Kehl, K.: “Dämpfung schwingender GFK-Zylinder”, 14. AVK-Jahrestagung, Vortrag 20, 1977.
Williams, M. L., “Stress Singularities, Adhesion and Fracture”, Proceedings of the Fifth U.S. National Congress of Applied Mechanics. (1966): 451–464.
Wilson, D. W. and J. R. Vinson, “Viscoelastic Analysis of Laminated Plate Buckling Including Transverse Shear and Normal Deformations, AIAA Journal, Vol. 22, July 1984, pp. 982–988.
Wilson, E. L.,Penzien, J.: Evaluation of Orthogonal Damping Matrizes, Int.J. Num.Meth.Engn. 4 (1972), p. 5–10
Wilson, E. L.: The Static Condensation Algorithm, Int. J. Num. Meth. Eng. 8 (1974).
Wimmer, H.: Die numerische Berechnung dünner, elastischer Flächentragwerke nach der linearen Schubdeformationstheorie mittels des zweidimensionalen Mehrstellenverfahrens, Diss., Universität Innsbruck 1986.
Wörndle, R.; Mang, H.: Zur Schubspannungsverteilung und Schugsteifigkeit bei querkraftbeanspruchten, inhomogenen Querschnitten beliebiger Form aus orthotropen Werkstoffen, Ing.-Archiv 54 (1984), 25–42.
Wu, C. I. and Vinson, J. R.: “Nonlinear Oscillations of Laminated Specifically Orthotropic Plates with Clamped and Simply Supported Edges”, Journal of the Acoustical Society of America, 49 5, Pt. 2, (May 1971): 1561–1567.
Wu, Edward M.: Optimal Experimental Measurements of Anisotropic Failure Tensors, Washington University St. Louis, Missouri 63130, J. Composite Materials, Vol. 6 (October 1972), p. 472.
Wurtinger, H.: Schubfestigkeitsuntersuchungen an GFK-Rohrprobekörpem. Materialprüfung 13, 1971, Nr. 10, S345–347.
Yang, P. C.; Norris, C. H.; Staysky, Y.: Elastic Wave Propagation in Heterogeneous Plates, Int. J. Solids Struct. 2 (1966), 665 ff
Yang, T. Y.: High Order Rectangular Shallow Shell Finite Element, J. Eng. Mech. Div. ASCE (1973), EMI 157–181.
Yang, T. Y.; Saigal, S.:A Curved Quadrilateral Element for Static Analysis of Shells with Geometric and Material Nonlinearity, Int. J. Num. Meth. Eng. 21(1985), 617–635.
Young, D. and R. Felgar, Jr., “Tables of Characteristic Functions Representing Normal Modes of Vibration of a Beam”, University of Texas Publication No. 4913, July 1944.
Zienkiewicz, O. C.; Taylor, R. L.; Too, J. M.: Reduced Integration Technique in General Analysis of Plates and Shells, Int. J. Num. Meth. Eng. 3 (1971), 275–290.
Zott, H.; Nonhoff, G.: AuBendruckbehälter aus glasfaserverstärktem Kunststoff, Kunststoffe, München 62 (1972) 12, S 820.
Bücher [B]
Agarwal, Bhagwan D.; Broutman, Lawrence J.: Analysis and Performance of Fiber Composites. John Wiley & Sons. New York, Chichester, Brisbane, Toronto 1980.
Batzer Hans: Polymere Werkstoffe (Band 2 und 3). Georg Thieme Verlag Stuttgart. New York 1984.
Buck, K. E.; Scharpf, D.; Stein, E.; Wunderlich: Finite Elemente in der Statik. Verlag von Wilhelm Ernst und Sohn. Berlin, München, Düsseldorf 1973.
Calcote, Lee R.: The Analysis of Laminated Composite Structures. Van Nostrand Reinhold Company. New York, Cincinnati, Toronto, London, Melbourne 1969.
Christensen, R. M.: Mechanics of Composite Materials. John Wiley & Sons. New York, Chichester, Brisbane, Toronto 1979.
Christensen-Thoft, P.; Baker, M. J.: Structural Reliablitiy Theory and its Applications. Springer Verlag. 1982.
Delmonte John: Technology of Carbon and Graphite Fiber Composites. Van Nostrand Reinhold Company. New York, Cincinnati, Atlanta, Dallas, San Francisco, London, Toronto, Melbourne 1981.
Dietz, A. G. H.: Composite Engineering Laminates. The MIT Press. Cambridge, Massachusetts, London. 1969.
Ehrenstein, G. W.; Puck, A.; et al: Einführen in das Gestalten und Dimensionieren. Beiheft zum Kunststoff-Berater. Isernhagen 1969.
Ehrenstein, G. W.; Martin, H. D. (Hg.): Konstruieren und Berechnen von GFK-Teilen. Beiheft zur Zeitschrift Kunststoff-Berater. Umschau Verlag 1969.
Ehrenstein, G. W.: Polymer-Werkstoffe, Struktur und mechanisches Verhalten. Carl Hanser Verlag. München, Wien 1978.
Gatewood, B. E.: “Thermal Loads on Joints”, Thermal Stresses. McGraw-Hill Book Company. New York 1957.
Gerharz, J.: Mechanics of Fatigue Damage and Fatigue Testing. AGARD Lecture Series 124. October 1982.
Görden, L.; Vieweg, C.: Polyester Kunststoffhandbuch VIII. Carl Hanser Verlag. München 1973.
Graf; Henning; Stange: Formeln und Tabellen der mathematischen Statistik. Springer. 1966.
Halpin, J. C.: Primer on Composite Materials: Analysis. techn.mic Publishing Co., Inc. 1984.
Hancox, N. L.: Fibre Composite Hybrid Materials. Applied Science Publishers LTD. London 1981.
Härtler, G.: Statistische Methoden für die Zuverlässigkeitsanalyse. VEB Verlag Technik. Berlin 1983.
Heißler, Herbert: Verstärkte Kunststoffe in der Luft-und Raumfahrttechnik. Verlag W. Kohlhammer. Stuttgart, Berlin, Köln, Mainz 1986.
Hintersdorf, G.: Tragwerke aus Plasten. Deutsche Verlagsanstalt. Stuttgart 1972.
Holiday, L.: Composite Materials. Elsevier. 1966.
Holmes, M.; Just, D. J.: GRP in Structural Engineering. Applied Science Publishers. London and New York 1983.
Hull, D.: An Introduction to Composite Materials. Cambridge University Press. Cambridge 1981.
Jakoby, G.: VDI-Fortschrittsbericht Nr. 555. 1987.???(Periodica)
Jones, Robert M.: Mechanics of Composite Materials. McGraw-Hill Kogakusha, LTD. Tokyo 1975.
Knauer, Berthold; Wende, Alfred: Konstruktionstechnik und Leichtbau. Akademie-Verlag. Berlin 1988.
Kreyßzig, E.: Statistische Methoden und ihre Anwendungen. Vandenhoek und Ruprecht. 1975.
Lekhnitskii, S. G.: Anisotropic Plates. Gordon and Breach Science Publishers. New York, London, Paris, Montreux, Tokyo, Melbourne 1968.
Lemon, G. H.; Norton, J. M.; Waddoups, M. E.: Statistical Analysis Methods for Characterizing Composite Materials in Fibrous Composites in Structural Design.??? (JAHR)
Lenoe, E.; Oplinger, D.; Burke, J.: Fibrous Composites in Structural Design. Plenum. 1980.
Levitt, A.: Whisker Technology. John Wiley & Sons. 1970.
Lubin, G.: Handbook of Fiberglass and Advanced Plastics Composites. Van Nostrand 1969.
Mann, N. R.; Schafer, R. E.; Singpurwalla, N. D.: Methods for Statistical Analysis of Reliability and Life Data. John Wiley & Sons. 1974.
Mc Cullough, R.: Concepts of Fiber Resin Composites. Marcel Dekker. 1971.
Meißner, Udo; Menzel, Andreas: Die Methode der finiten Elemente. Springer-Verlag. Berlin, Heidelberg, New York, London, Paris, Tokyo, Hong Kong 1989.
Niederstadt,Cünter: Leichtbau mit kohlenstoffaserverstärkten Kunststoffen. Technische Akademie Esslingen. expert verlag. 1985.
Oleesky, S. S.; Mohr, J. G.: Handbook of Reinforced Plastics. Reinhold. 1964.
Pagano, N. J. - Editor: Composite Materials Series, Volume 5, Interlaminar Response of Composite Materials. Elsevier. Amsterdam, Oxford, New York, Tokyo 1989.
Plantema, F. J.: Sandwich Construction; The bending and buckling of sandwich beams, plates and shells. John Wiley & Sons, Inc. New York, London, Sidney 1966.
Puck, A.; Wurtinger, H.: Werkstoffgemäße Dimensionierungsgrößen für den Entwurf von Bauteilen aus kunstharzgebundenen Glasfasern, Teil I und II. Forschungsberichte des Landes Nordrhein-Westfalen Nr. 1253. Westdeutscher Verlag, Köln 1963.
Scala, E: Composite Materials for Combined Functions. Hayden 1973.
Schardt, Richard: Verallgemeinerte Technische Biegetheorie. Springer-Verlag. Berlin, Heidelberg, New York, London, Paris, Tokyo, Hong Kong 1989.
Schmidt, Kurt A. F.: Textilglas für die Kunststoffverstärkung. Zechner & Hüthig Verlag Gmbh. Speyer 1972.
Schwartz, M. M.: Composite Materials Handbook. McGraw-Hill. 1984.
Schwartz, R. T.; Schwartz, H. S.: Fundamental Aspects of Fiber Reinforced Plastic Composites. John Wiley & Sons, Inc. New York, London, Sidney 1968.
Schwarz, H. R.: Methode der Finiten Elemente. B. G. Teubner-Verlag, Stuttgart 1984.
Selden, P. H.: Glasfaserverstärkte Kunststoffe. Springer Verlag. Berlin, Heidelberg, New York 1967.
Sendeckyj, G. P.: Mechanics of Composite Materials, (Composite Materials vol. 2, ed.: Broutman, L. J.; Krock, R. H.), Academic Press, New York 1974.
Sih G. C.; Skudra, A. M.: Failure Mechanics of Composistes.Elsevier Science Publishers B. V. Amsterdam 1985.
Skudra, A. M.; Bulavs, F. Ja.; Rocens, K. A.: Kriechen und Zeitstandverhalten verstärkter Plaste. VEB Deutscher Verlag für Grundstoffindustrie. Leipzig 1975.
Sonneborn, R. H.: Fiberglas Reinforced Plastics. Reinhold 1954.
Springer, George S.: Environmental Effects on Composite Materials. techn.mic Publishing Co., Inc. 1984.
Storm, R.: Wahrscheinlichkeitsrechnung, mathematische Statistik und statistische Qualitätskontrolle. VEB Fachbuchverlag. Leipzig 1976.
Tewary, V. K.: Mechanics of Fibre Composites. Halsted 1978.
Tsai, S. W.; Halpin, J. C.; Pagano, N. J.: Composite Materials Workshop. techn.mic Publishing Co. Inc. Stanford, Conn. 1968.
Tsai, Stephen W.: Composites Design, Think Composites. Dayton, Paris and Tokyo 4 1988.
Tsai, Stephen W.; Hahn, H. Thomas: Introduction to Composite Materials. techn.mic Publishing Company Westport. Connecticut 1980.
Vinson, J. R.; Sierakowski, R. L.: The Behavior of Structures Composed of Composite Materials. Martinus Nijhoff Publishers. 1986.
Vinson, J. R.; Chou, T. W.: Composite Materials and Their Use in Structures. Applied Science Publishers. London 1975.
Wende, Alfred; Moebes, Wolfgang; Marten, Heinz: Glasfaserverstärkte Plaste. VEB Deutscher Verlag für Grundstoffindustrie. Leipzig 1969.
Winkler, M.: “Die Spannungs-Verzerrungs-Beziehungen für nichtlinear-viskoelastische, orthotrope Werkstoffe” (Techn. Diss.) (A). Dresden 1984.
Whitney, James M.: Structural Analysis of Laminated Anisotropic Plates.Technomic Publishing Co.Lancaster,Basel 1987.
Zumpe, Günter: Angewandte Mechanik. Akademie-Verlag. Berlin 1983.
Konferenz-und Institutsberichte [C]
AVK Arbeitsgemeinschaft Verstärkte Kunststoffe E. V., Carl Hanser Verlag München, Verlag Brunke Garrels Hamburg
DFVLR Deutsche Forschungs-und Versuchsanstalt für Luft-und Raumfahrt, Wissenschaftliches Berichtswesen der DFVLR
SPI Proceedings, The Society of the Plastics Industry, Inc.
ASTM STP, American Society for Testing and Materials
SAMPE, Materials Science Mongraphs, Elsevier Amsterdam, Oxford, New York, Tokyo
Composite Structures (1–6), I. H. Marshall; Department of Mechanical and Production Engineering, Paisley College of Technology, Scotland, Elsevier Applied Science London, New York
Institutsberichte (1–5), Institut für Baustatik und verstärkte Kunststoffe, Universität Innsbruck, Fakultät für Bauingenieurwesen und Architektur
Chemiefaserverstärkte Kunststoffe - Composites im Rahmen der Internationalen Chemiefasertagungen, Österreichisches Chemiefaser-Institut Plößlgasse 8, 1041 Wien
“Measurements of Complex Shear Moduli of Thin Viscoelastic Layers”, Miller, H. E.; Jergens, J. L.; Plunkett, R., University of Minnesota Institute of Technology Technical Report.
Statistical Analysis of Composite Fatigue Life, Park, W. J.; Kim, R. Y., DFVLR-Strukturmechanikkolloquium.
Überblick über den Stand der Zuverlässigkeitsmethode 1. Ordnung, Backwitz, R.
Diverse Unterlagen und Handbücher [D]
AD-Merkblatt N1: Druckbehälter aus glasfaserverstärkten Kunststoffen Advanced Composite Design Guide, Five Volumes, Air Force Materials La-boratory, Third Edition, 1977
AVK Arbeitsgemeinschaft Verstärkte Kunststoffe E. V., Handbuch Arbeitsgemeinschaft Verstärkte Kunststoffe E. V., Am Hauptbahnhof 12, 6000 Frankfurt am Main
“Exploratory Application of Filament-Wound Reinforced Plastics for Aircraft Landing Gear”, AFML-TR-66–309. (December 1966).
Grundlagen zur Festlegung von Sicherheitsanforderungen für bauliche Anlagen (GruSiBau), Ausg. 1981, Beuth-Verlag Berlin
Fachausschuß “Verstärkte Hochpolymere”, Konstruktionshandbuch Kammer der Technik
Konstruktionsdaten-Glasfaser-Verbundwerkstoffe, Fibreglass Limited Reinforcements Division, St. Helens, Merseyside England WA10 3TR
Luftfahrt Technisches Handbuch (LTH), Faserverbund-Leichtbau, 1984
Military Handbook 17A, Plastics for Aerospace Vehicles, Part 1, Reinforced Platics, January, 1971
Structural Design Guide for Advanced Composite Applicatins, Air Force Materials Laboratory, Advanced Composites Division, January, 1971.
User’s Manual for Structural Reliability Programs, CUTALG-FORMSORM-SYSREL, Heft 74/1985, Laboratorium für konstruktiven Ingenieurbau, TU München
Verstärkte Plaste, Vorträge im Rahmen der wissenschaftlich-technischen Tagungen mit internationaler Beteiligung, Kammer der Technik
Faserverbund-Leichtbau, Deutsche Forschungs-und Versuchsanstalt für Luft-und Raumfahrt e. V., Dornier GmbH, Messerschmitt - Bölkow - Blohm GmbH, Vereinigte Flugtechnische Werke - Fokker GmbH
Handbuch für Strukturberechnung (HSB), IASB (Industrieausschuß für Strukturberechnung), Vorsitzender Dr. E. Schreiner, MBB-UF, Ottobrunn.
Werkstoff-Handbuch der Deutschen Luftfahrt Teil II, Nichtmetallische Werkstoffe; Herausgegeben von DIN Normstelle Luftfahrt 1984, Beuth-Verlag GmbH.
Werkstoff-Handbuch der Deutschen Luftfahrt Teil II, Nichtmetallische Werkstoffe; Herausgegeben von DIN Normstelle Luftfahrt 1984, Beuth-Verlag GmbH.
Periodika [E]
Kunststoffe, Organ deutscher Kunststoff-Fachverbände, Carl Hanser Verlag München
Journal of Elasticity, Kluwer Academic Publishers
Plastic und Kautschuk Zeitung, Giesel Verlag Isernhagen/Frankfurt am Main
Journal of Composite Materials, Technomic Publishing Co., Inc., 851 New Holland Avenue, Box 3535, Lancaster, Pennsylvania 17604
Journal Applied Mechanics (ASME)
Journal of Sound and Vibration
Journal Testing and Evaluation (ASTM)
Composite Structures, Editor: I. H. Marshall, Department of Mechanical and Production Engineering, Paisley College of Technology, Paisley PA1 2BE, UK, Elsevier Applied Science
Sampe Journal, Published bi-monthly by Sampe International Business Office 1161, Parkview Drive, Covina, California 91724
Composites, the international journal of the science and technology of reinforced materials, Butterworht Scientific Limited, PO Box 63, Westbury House, Bury Street, Guildford, Surrey, England, GU2 5BH.
International Journal of Engineering Science
International Journal of Solids and Structures
Polymer Composites (New Journal by SPE)
Polymer Engineering and Science
Rights and permissions
Copyright information
© 1992 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Moser, K. (1992). Literatur. In: Faser-Kunststoff-Verbund. VDI-Buch. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-58092-5_11
Download citation
DOI: https://doi.org/10.1007/978-3-642-58092-5_11
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-63469-7
Online ISBN: 978-3-642-58092-5
eBook Packages: Springer Book Archive