Abstract
The widespread and economical use of computers to solve partial differential equations by finite element or finite difference methods has made it possible to consider nonlinear problems in thermomechanics representing large deformations and complex material behavior. In fact, it is relatively simple to formulate some finite difference and finite element methods in such a way that the constitutive equations can be inserted in subroutines without disturbing the remainder of the computer code implementing the method. As a result, there has been an increase in interest in the development of constitutive equations purporting to represent “realistic” material behavior in the nonlinear range. In some cases empirical equations have been proposed which have been fitted in some, usually restricted, way to experimental data. These have been inserted without further ado into the codes, and numerical solutions for specific and often very complicated initial-boundary value problems have been obtained as a result of many hours of computer time. Little attention has been given to the character of the theory resulting from the constitutive formulation, or to validation of results against exact solutions or experiments representative of the problems being solved.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Asay, J.R., D.L. Hicks and D.B. Holdridge (1975), “Comparison of Experimental and Calculated Elastic-Pias tic Wave Profiles in LiF,” J. Appl. Phys., 46, 4316.
Coleman, B.D. and M.E. Gurtin (1967), “Thermodynamics with Internal State Variables,” J. Chem. Phys., 47, 1625.
Grady, D.E. et al. (1982), “Microstructure and Mechanical Properties of Precipitation Hardened Aluminum under High Strain Rate Deformation,” in Proc. 29th Sagamore Army Materials Research Conf., Sagamore, NY.
Herrmann, W. (1976), “Some Recent Results in Elastic-Plastic Wave Propagation,” in Propagation of Shock Waves, E. Varley (ed.), ASME AMD-17.
Herrmann, W., D.L. Hicks and E.G. Young (1971), “Attenuation of Elastic-Plastic Stress Waves,” in Shook Waves and the Mechanical Properties of Solids, J.J. Burke and V. Weiss (eds.), Syracuse Univ. Press.
Herrmann, W. (1974), “Development of a High Strain Rate Constitutive Equation for 6061-T6 Aluminum,” Sandia National Labs. SLA-73 0897.
Herrmann, W., W.R. Wawersik and S.T. Montgomery (1982), “Review of Creep Modeling of Rock Salt,” in Intl. Conf. Constitutive Modeling, Tucson, AZ.
Krieg, R.D. (1980), “A Unified Creep-Plasticity Model for Halite,” Sandia National Labs. SAND80-1195.
Nunziato, J.W., E.K. Walsh, K.W. Schuler and L.M. Barker (1974), “Wave Propagation in Nonlinear Viscoelastic Solids,” in Encyclopedia of Physics, VIa/4, S. Flügge (ed.), Springer-Verlag, Berlin, 1–108.
Nunziato, J.W., K.W. Schuler and D.B. Hayes (1974), “Wave Propagation Calculations for Nonlinear Viscoelastic Solids,” in Proc. Intl. Conf. on Comp. Methods in Nonlinear Mechanics, J.T. Oden (ed.), U. Texas at Austin, 489-498.
Passman, S.L. and T.G. Trucano (1983), “Stability, Instability and Localization in Materials with Damage,” Intl. J. Numerical and Analytical Methods in Geornechanics (submitted).
Bodner, S.R. and Y. Partom (1975), “Constitutive Equations for Elastic-Visco-plastic Strain-Hardening Materials,” J. Appl. Mech., 42, 385.
Cernocky, E.P. (1982), “Comparison of the Unloading and Reversed Loading Behavior of Three Viscoplastic Constitutive Theories,” Int. J. Non-Linear Mechanics, 17, 255.
Cernocky, E.P. (1982), “An Examination of Four Viscoplastic Constitutive Theories in Uniaxial Monotonic Loading,” Intl. J. Solids and Structures, 18, 989.
Cernocky, E.P. and E. Krempl (1979), “A Nonlinear Uniaxial Integral Constitutive Equation Incorporating Rate Effects, Creep, and Relaxation,” Intl. J. Non-Linear Mechanics, 14, 183.
Cernocky, E.P. and E. Krempl (1983), “Evaluation of a Uniaxial, Nonlinear, Second-Order Differential Overstress Model for Rate-Dependence, Creep and Relaxation,” Intl. J. Solids and Structures, 19, 753.
Chaboche, J.L. (1977), “Viscoplastic Constitutive Equations for the Description of Cyclic and Anisotropic Behavior of Metals,” Bull. de l’Acad. Polonaise des Sciences, Série Sc. et Techn., 25, 33.
Hart, E.W. (1976), “Constitutive Relations for the Nonelastic Deformation of Metals,” J. Eng. Matls. and Tech., 98, 193.
Kallianpur, V.V. (1982), Ph.D. thesis, Rensselaer Polytechnic Institute, Troy, NY.
Krempl, E. (1974), “Cyclic Creep. An Interpretive Literature Survey,” WRC Bulletin No. 195, Welding Research Council, New York.
Krempl, E. (1975), “On the Interaction of Rate-and History-Dependence in Structural Metals,” Acta Mechanica, 22, 125.
Krempl, E. (1979), “An Experimental Study of Room-Temperature Rate Sensitivity, Creep and Relaxation of Type 304 Stainless Steel,” J. Mech. and Phys. of Solids, 27, 363.
Krempl, E. (1980), “Inelastic Constitutive Equations and Phenomenological Laws of Damage Accumulation for Structural Metals,” Phys. Non-Linearities in Struc. Anal., Proc. IUTAM Symp., Senlis, France, 117.
Krempl, E. (1983), “Viscoplasticity Based on Overstress. Experiment and Theory,” Ch. 19, pp. 369-384 in Mechanics of Eng. Materials, C.S. Desai and R.H. Gallagher (eds.), J. Wiley and Sons, to appear.
Krempl, E. and H. Lu (1983), “The Rate(Time)-Dependence of Ductile Fracture at Room Temperature,” to appear Engineering Fracture Mechanics.
Kujawski, D., V. Kallianpur and E. Krempl (1980), “An Experimental Study of Uniaxial Creep, Cyclic Creep-and Relaxation of AISI Type 304 Stainless Steel at Room Temperature,” J. Mech. and Phys. of Solids, 28, 129.
Kujawski, D. and E. Krempl (1981), “The Rate(Time)-Dependent Behavior of Ti-7Al-2Cb-1Ta Titanium Alloy at Room Temperature under Quasi-Static Monotonie and Cyclic Loading,” J. Appl. Mech., 48, 55.
Lamba, H.S. and O.M. Sidebottom (1978), “Cyclic Plasticity for Nonproportional Paths. Parts I and II,” J. Eng. Matls. and Tech., 100, 96.
Liu, M.C.M. and E. Krempl (1979), “A Uniaxial Viscoplastic Model Based on Total Strain and Overstress,” J. Mech. and Phys. of Solids, 27, 377.
Lu, H. (1983), Work in progress at the Mechanics of Materials Laboratory at Rensselaer Polytechnic Institute, Troy, NY.
McDowell, D.L. (1983), “On the Path Dependence of Transient Hardening and Softening to Stable States under Complex Biaxial Cyclic Loading,” Proc. Intl. Conf. on Constitutive Laws for Eng. Materials, C.S. Desai and R.H. Gallagher (eds.), Tucson, AZ.
Miller, A.K. (1976), “An Inelastic Constitutive Model for Monotonie, Cyclic and Creep Deformation, Parts I and II,” J. Eng. Matls. and Tech., 98, 97.
Rhode, R.W. and J.C. Swearengen (1980), “Deformation Modeling Applied to Stress Relaxation of Four Solder Alloys,” J. Eng. Matls. and Tech., 102, 207.
Stouffer, D.C. et al. (1980), Workshop on Continuum Mechanics Approach to Damage and Life Prediction, (May 4–7, 1980), Carrollton, KY.
Valanis, K.C. (1980), “Fundamental Consequences of a New Intrinsic Time Measure. Plasticity as a Limit of the Endochronic Theory,” Arch. Mech., 32, 171.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1984 Martinus Nijhoff Publishers, Dordrecht.
About this chapter
Cite this chapter
Herrmann, W. (1984). On the Experimental Determination of Constitutive Equations. In: Nemat-Nasser, S., Asaro, R.J., Hegemier, G.A. (eds) Theoretical foundation for large-scale computations for nonlinear material behavior. Mechanics of elastic and inelastic solids 6, vol 6. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-6213-2_9
Download citation
DOI: https://doi.org/10.1007/978-94-009-6213-2_9
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-009-6215-6
Online ISBN: 978-94-009-6213-2
eBook Packages: Springer Book Archive