Abstract
Numerical error present in Computational Fluid Dynamics (CFD) is given in Chapters 4.1. to 4.6. In the last chapter of this document, Chapter 4.7, a special attention is given to the error present for the Discrete Element Method (DEM). However, it should be clear that much of the topic present in Chapters 4.1 to 4.6 applies also for DEM, and other numerical flow techniques not mentioned here.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
AIAA, Guide for the Certification and Validation of Computational Fluid Dynamics Simulations. AIAA Guide G-077-1998 (1998)
Casey, M., Wintergerste, T. (eds.): ERCOFTAC (2000), Best Practice Guidelines, Version 1.0. ERCOFTAC Special Interest Group on Quality and Trust Industrial CFD (2000)
Versteeg, H.K., Malalasekera, W.: An introduction to computational fluid dynamics – the finite volume method, 2nd edn. Pearson Education Limited, England (2007)
Oberkampf, W.L., Trucano, T.G.: Verification and Validation in Computational Fluid Dynamics. Prog. Aerosp. Sci. 38, 209–272 (2002)
Mase, G.E.: Schaums Outline Series: Theory and Problems of Continuum Mechanics. McGraw–Hill Inc., USA (1970)
Malvern, L.E.: Introduction to the Mechanics of Continuous Medium. Prentice-Hall Inc., New Jersey (1969)
Edwards Jr., C.H., Penney, D.E.: Calculus and Analytical Geometry, 2nd edn. Prentice-Hall, Inc., USA (1986)
Langtangen, H.P.: Computational Partial Differential Equations, Numerical Methods and Diffpack Programming. Lecture Notes in Computational Science and Engineering. Springer, Berlin (1999)
Wallevik, J.E.: Rheology of Particle Suspensions - Fresh Concrete, Mortar and Cement Paste with Various Types of Lignosulfonates (Ph.D.-thesis); Department of Structural Engineering, The Norwegian University of Science and Technology (2003), http://www.diva-portal.org/ ISBN 82-471-5566-4, ISSN 0809-103X
Kolman, B.: Introductory linear algebra with applications, 5th edn. Maxwell Macmillan International (1993)
Wallevik, J.E.: Minimizing end–effects in the coaxial cylinders viscometer: Viscoplastic flow inside the ConTec BML Viscometer 3. J. Non-Newtonian Fluid Mech. 155, 116–123 (2008)
Anderson, J.D.: Computational Fluid Dynamics, The Basics with Applications. McGraw-Hill, Inc., USA (1995)
Fletcher, C.A.J.: Computational Techniques for Fluid Dynamics, 2nd edn. Springer Series in Computational Physics, vol. I. Springer, Germany (1990)
Tattersall, G.H., Bloomer, S.J.: Further development of the two–point test for workability and extension of its range. Mag. Concr. Res. 31(109), 202–210 (1979)
Tattersall, G.H., Banfill, P.F.G.: The Rheology of Fresh Concrete. Pitman Books Limited, Great Britain (1983)
Tattersall, G.H.: Workability and Quality Control of Concrete. E & FN Spon, Great Britain (1991)
Domone, P.L.J., Yongmo, X., Banfill, P.F.G.: Developments of the two–point workability test for high–performance concrete. Mag. Concr. Res. 51(3), 171–179 (1999)
Wallevik, J.E.: Rheological properties of cement paste: thixotropic behavior and structural breakdown. Cement Concr. Res. 39, 14–29 (2009)
Oldroyd, J.G.: A Rational Formulation of the Equations of Plastic Flow for a Bingham Solid. Proc. Camb. Philos. Soc. 43, 100–105 (1947)
Oldroyd, J.G.: Two-Dimensional Plastic Flow of a Bingham Solid. Proc. Camb. Philos. Soc. 43, 383–395 (1947)
Barnes, H.A., Hutton, J.F., Walters, K.: An Introduction to Rheology. Elsevier Science, Amsterdam (1989)
Irgens, F.: Continuum Mechanics. Springer, Berlin (2008)
Tanner, R.I., Walters, K.: Rheology: An Historical Perspective. Elsevier Science B.V., Netherlands (1998)
Bercovier, M., Engelman, M.: A finite element method for incompressible non–Newtonian flows. J. Comput. Phys. 36, 313–326 (1980)
Taylor, A.J., Wilson, S.D.R.: Conduit flow of an incompressible, yield–stress fluid. J. Rheol. 41(1), 93–101 (1997)
Burgos, G.R., Alexandrou, A.N., Entov, V.: On the determination of yield surfaces in Herschel–Bulkley fluids. J. Rheol. 43(3), 463–483 (1999)
Papanastasiou, T.C.: Flow of material with yield. J. Rheol. 31, 385–404 (1987)
O’Donovan, E.J., Tanner, R.I.: Numerical study of the Bingham squeeze film problem. J. Non-Newtoninan Fluid Mech. 15, 75–83 (1984)
Wallevik, J.E.: Development of Parallel Plate-Based Measuring System for the ConTec Viscometer. In: Proceedings of the 3rd International RILEM Symposium on Rheology of Cement Suspensions such as Fresh Concrete, August 19-21, RILEM Publications S.A.R.L., Reykjavik (2009) ISBN: 978-2-35158-091-2
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 RILEM
About this chapter
Cite this chapter
Wallevik, J.E., Krenzer, K., Schwabe, JH. (2014). Numerical Errors in CFD and DEM Modeling. In: Roussel, N., Gram, A. (eds) Simulation of Fresh Concrete Flow. RILEM State-of-the-Art Reports, vol 15. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-8884-7_4
Download citation
DOI: https://doi.org/10.1007/978-94-017-8884-7_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-8883-0
Online ISBN: 978-94-017-8884-7
eBook Packages: EngineeringEngineering (R0)