Abstract
The prepared hydroxyapatite has similar properties in comparison with the originally reported in relation to morphology, particle size and stoichiometric compound: A rod-like morphology with particle size of 20–50 × 100–200 nm, particle average size of 175.9 nm with 1-modal, pore radii of 1.22 nm and stoichiometric and anisotropic. The particles characteristics are single and homogeneous in phase, uniform particle size in the nanometer range and chemical composition (Condon in Microporous Mesopourus Mat 38:359-383) [1], (Juang and Hon in Biomaterials 17:2059-2064) [2]. This process does not include sintering only heat treatment, and it is a HA fabrication advantage. And this does not present oxides or some carbonates traces. This method is easier and cheaper than reported originally (Afshar et al in Mat Des 24:197-202) [3] due to synthesis process which does not involve controlled atmosphere in the reactor at room temperature.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Condon JB (2000) Microporous Mesopourus Mat 38:359–383
Juang HY, Hon MH (1995) Biomaterials 17:2059–2064
Afshar A, Ghorbani M, Ehsani N, Saeri MR, Sorrell CC (2003) Some important factors in the wet precipitation process of hydroxyapatite. Mat Des 24:197–202
Ledesma-Carrión Dora E (2015) Modification on the synthesis process of hydroxyapatite. In: Lecture notes in engineering and computer science: proceedings of the international multiconference of engineers and computer scientists 2015, international conference on engineering physics, IMECS 2015, 18–20 Mar 2015, Hong Kong, pp 762–766
Garcia C, Paucar C, Gaviria J (2006) Study of some parameters that determine the synthesis of hydroxyapatite by the precipitation route. Dyna rev.fac.nac.minas [online], vol 73, no 148, pp 9–15. ISSN 0012-7353, 01/06
Guzmán C, Piña C, Munguía N (2005) Stoichiometric hydroxyapatite obtained by precipitation and sol gel processes. Rev Mex Fis 51:284–293
Yeong KCB, Wang J, Ng SC (1999) Fabricating densified hydroxyapatite ceramics from a precipitated precursor. Mater Lett 38:208–213
Joschek S, Nies B, Krotz R, Göpferich A (2000) Characterization of porous hydroxyapatite ceramics made of natural bone. Biomaterials 21:1645–1658
Yeong KCB, Wang J, Ng SC (2001) Mechanochemical synthesis of nanocrystalline hydroxyapatite from CaO and CaHPO4. Biomaterials 22:2705–2712
Mostafa NY (2005) Characterization, thermal stability and sintering of hydroxyapatite powders prepared by different routes. Mater Chem Phys 94:333–341
Rehman I, Bonfield W (1997) Characterization of hydroxyapatite and carbonated apatite by photo acoustic FTIR spectroscopy. J Mater Sci Mater Med 8:1–4
Feng-Huei L, Liao CJ, Ko-Shao C, Jui-Sheng S (2000) Thermal reconstruction behavior of the quenched hydroxyapatite powder during reheating in air. Mater Sci Eng C 13:97–104
Sing KSW, Everett DH, Haul RAW, Moscou L, Pierotti RA, Rouquérol J, Siemieniewska T (1985) Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity, Pure Appl Chem IUPAC 57(4):603–619
Rouquérol J, Avnir D, Fairbridge CW, Everett DH, Haynes JH, Pernicone N, Ramsay JDF, Sing KSW, Unger KK (1994) physical and biophysical chemistry division commission on colloid and surface chemistry including catalysis. Recommendations for the characterization of porous solids (Technical Report). Pure Appl Chem IUPAC 66(8):1739–1758
Gómez J, Elizondo N, Guerrero H (2004) Visualización cristalográfica de la hidroxiapatita. Ingenierías 24:46–50
Neder, NB, Proffen T (1996) Teaching Diffraction with the Aid of Computer Simulations. J Appl Cryst 29:727–735 (Würzburg Universität)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media Singapore
About this paper
Cite this paper
Ledesma-Carrión, D.E. (2016). Optimization of Synthesis Process of Nano-Hydroxyapatite. In: Yang, GC., Ao, SI., Huang, X., Castillo, O. (eds) Transactions on Engineering Technologies. Springer, Singapore. https://doi.org/10.1007/978-981-10-0551-0_11
Download citation
DOI: https://doi.org/10.1007/978-981-10-0551-0_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-0550-3
Online ISBN: 978-981-10-0551-0
eBook Packages: EngineeringEngineering (R0)