Abstract
Permeable concrete is the concrete containing interconnected voids inside to allow air or water moving through it. The fundamental material characteristic of permeable concrete is its open pore structure (primarily the connected porosity and the larger pore sizes), which is caused by gap-graded coarse aggregates and little to minimal amounts of fine aggregates. Water is easy to percolate through paving matrix into the subsoil beneath when permeable concrete is utilized as paving material. Permeable concrete is beneficial for conserving storm water and recharging groundwater, thus can be used to absorb the noise of vehicles and adjust the temperature and humidity of the Earth’s surface.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
D.H. Nguyen, N. Sebaibi, M. Boutouil, L. Leleyter, F. Baraud, A modified method for the design of pervious concrete mix. Constr. Build. Mater. 73(73), 271–282 (2014)
A.K. Chandrappa, K.P. Biligiri, Pervious concrete as a sustainable pavement material-research findings and future prospects: a state-of-the-art review. Constr. Build. Mater. 111, 262–274 (2016)
N. Neithalath, D.P. Bentz, M.S. Sumanasooriya, Predicting the permeability of pervious concrete. Concr. Int. 32, 35–40 (2010)
N. Neithalath, M.S. Sumanasooriya, O. Deo, Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction. Mater. Charact. 61(8), 802–813 (2010)
N. Neithalath, Development and characterization of acoustically efficient cementitious materials, Dissertation for the Doctor Degree, Purdue University, 2004
K. Low, D. Harz, N. Neithalath. in Statistical Characterization of the Pore Structure of Enhanced Porosity Concrete. Concrete Technology Forum. Focus on Sustainable Development (2008)
F. Montes, L. Haselbach, Measuring hydraulic conductivity in pervious concrete. Environ. Eng. Sci. 23(6), 960–969 (2006)
K. Wang, V.R. Schaefer, J.T. Kevern, M.T. Suleiman, in Development of Mix Proportion for Functional and Durable Pervious Concrete. National Ready Mix Concrete Association Concrete Technology Forum: Focus on Pervious Concrete (2006)
O. Deo, Influence of material structure on the structural and environmental properties of pervious concretes, Dissertation for the Doctor Degree, Clarkson University, 2011
P.D. Tennis, M.L. Leming, D.J. Akers. Pervious Concrete Pavements (Portland Cement Association, Skokie, 2004)
N. Ghafoori, S. Dutta, Laboratory investigation of compacted no-fines concrete for paving materials. J. Mater. Civ. Eng. 7, 183–191 (1995)
M. Zheng, S. Chen, B. Wang, Mix design method for permeable base of porous concrete. Int. J. Pavement Res. Technol. 5, 102–107 (2012)
J. Yang, G. Jiang, Experimental study on properties of pervious concrete pavement materials. Cem. Concr. Res. 33(3), 381–386 (2003)
V.R. Schaefer, K. Wang, M.T. Suleiman. Mix design development for pervious concrete in cold weather climates. Technical Report, National Concrete Pavement Technology Center, Iowa State University, USA (2006)
J.T. Kevern, Advancement of pervious concrete durability, Dissertation for the Doctor Degree, Iowa State University, 2008
ACI committee 522. Pervious concrete. Report No. 522R-10, American Concrete Institute (ACI), Detroit, USA
R.C. Meininger, No-fines pervious concrete for paving. Concr. Int. 10(8), 20–27 (1988)
H. Shena, S.M. Oppenheimer, D.C. Dunandb, L.C. Brinson, Numerical modeling of pore size and distribution in foamed titanium. Mech. Mater. 38(8–10), 933–944 (2006)
N. Neithalath, N.J. Weiss, J. Olek, Characterizing enhanced porosity concrete using electrical impedance to predict acoustic and hydraulic performance. Cem. Concr. Res. 36(11), 2074–2085 (2006)
M.S. Sumanasooriya, N. Neithalath, Stereology and morphology based pore structure descriptors of enhanced porosity (pervious) concretes. ACI Mater. J. 106(5), 429–438 (2009)
B.M. Das, K. Sobhan, Principles of Geotechnical Engineering (Cengage Learning, Boston, 2010)
D.H. Nguyen, M. Boutouil, N. Sebaibi, L. Leleyter, F. Baraud, Valorization of seashell by-products in pervious concrete pavers. Constr. Build. Mater. 49, 151–160 (2013)
A. Yahia, K.D. Kabagire, New approach to proportion pervious concrete. Constr. Build. Mater. 62, 38–46 (2014)
L.K. Crouch, A. Sparkman, T.R. Dunn, R. Hewitt, W. Mittlesteadt, B. Byard, J. Pitt, Estimating pervious PCC pavement design inputs with compressive strength and effective void content. in Concrete Technology Forum, Proceedings, National Ready Mixed Concrete Association (2006)
M. Sonebi, M.T. Bassuoni, Investigating the effect of mixture design parameters on pervious concrete by statistical modelling. Constr. Build. Mater. 38, 147–154 (2013)
http://www.techinsider.io/how-magical-concrete-absorbs-water-2015-9/
M. Scholz, P. Grabowiecki, Review of permeable pavement systems. Build. Environ. 42(11), 3830–3836 (2007)
V.M. Malhotra, No-fines concrete-its properties and applications. Int. Concr. Abstr. Portal 73(11), 628–644 (1976)
N. Ghafoori, N.S. Dutta, Development of no-fines concrete pavement applications. J. Transp. Eng. 121(3), 283–288 (1995)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Han, B., Zhang, L., Ou, J. (2017). Permeable Concrete. In: Smart and Multifunctional Concrete Toward Sustainable Infrastructures. Springer, Singapore. https://doi.org/10.1007/978-981-10-4349-9_21
Download citation
DOI: https://doi.org/10.1007/978-981-10-4349-9_21
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-4348-2
Online ISBN: 978-981-10-4349-9
eBook Packages: EngineeringEngineering (R0)