Abstract
To explore the relationship of oil composition and lubricating characteristics, new base oils with different carbon chain length and aromatics contents for lubrication in cold rolling aluminum process were investigated by means of Gas Chromatography-Mass Spectrometry. Tribological tests were carried out on a four-ball friction and wear testing machine. Results showed that the film strength gradually increased with an increasing of aromatics content in oils and friction coefficients decreases simultaneously. Cold rolling experiments were conducted to be further to analyze the lubrication effects of new rolling oils by a 4-high mill. The curves of lubricating characteristics in rolling were obtained, and the minimum rolling thickness after rolling under different lubricating conditions was found to decrease obviously.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
X. Fu, W. Yao, L. Zhang, The current status and development trend of additives in lubricating oils. Automobile Technol. Mater. 5, 1–6 (2005)
W. Du, G. Li, Oil residual on foil surface with wider width high speed aluminum foil mill and improving methods. Light Alloy Process. Technol. 35(6), 34–35 (2007)
C.N. Panagopoulos, E.P. Georgiou, Cold rolling and lubricated wear of 5083 aluminum alloy. Mater. Des. 31, 1050–1055 (2010)
J. Sun, Y. Sun, M.A. Yanli et al., Effect of rolling oil on the surface quality of annealed aluminum foils. J. Univ. Sci. Technol. B 30(2), 137–140 (2008)
J. Shibata, T. Wakabayashi, S. Mori, Adsorption characteristics and lubricating performance of coolant components in cold rolling of aluminum. Tribol. Int. 40(5), 748–753 (2007)
J. Sun, Y. Kang, T. Xiao, J. Wang, Lubrication in strip cold rolling process. J. Univ. Sci. Technol. B 11(4), 368–372 (2004)
J. Sun, Y. Huang, M. Lu, Optimize aluminum’s surface roughness in rolling lubrication process. Ind. Lubr. Tribol. 65(3), 175–180 (2013)
Z. Liao, S. Yang, Analysis and discussion on effect factors of aluminum foil rolling process. Nonferrous Met. Process. 43(1), 21–24 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zhao, Y., Sun, J., Yuan, G., Wang, C. (2018). Relationship of Oil Composition and Lubricating Characteristics in Cold Rolling Aluminum Strips. In: Han, Y. (eds) Advances in Materials Processing. CMC 2017. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-0107-0_66
Download citation
DOI: https://doi.org/10.1007/978-981-13-0107-0_66
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0106-3
Online ISBN: 978-981-13-0107-0
eBook Packages: EngineeringEngineering (R0)