Abstract
Increasing human population, environmental impacts of synthetic polymers and limited non-renewable resources have steered the development of sustainable alternatives. Synthetic polymer composites are made from two or more non-biodegradable components which make its recycling difficult leading to high disposal cost and negative environmental impact. Green composites are considered an alternative to petroleum-based polymer composites due to their lower environmental impacts. Voluminous researchers have proposed the development of biodegradable green composites from renewable sources like natural fibres, agricultural feedstocks and biopolymers to make them sustainable and environmentally friendly. Furthermore, these green composites mainly constituted of natural fibres and biopolymers have high specific strength, noteworthy processing benefits, and low relative density and biodegradable which makes them industrially applicable. Although green composites are sustainable and environmentally friendly, they still need to overcome challenges like low ductility, low dimensional stability, less long-term stability for outdoor applications and moisture absorption. Even though there is scope for research in future for green composites to completely substitute synthetic polymer composites, green composites are already being used in applications which require less mechanical resistance like packaging, gardening items, automotive panels, furniture. Green composites have come a long way in the past 10 years and are expected to generate properties comparable/superior to synthetic polymer composites in near future which will play a remarkable role in reducing usage of non-renewables and waste generation.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alvarez VA, Vázquez A (2004) Thermal degradation of cellulose derivatives/starch blends and sisal fibre biocomposites. Polym Degrad Stab 84(1):13–21. https://doi.org/10.1016/j.polymdegradstab.2003.09.003
Alvarez VA et al (2004a) Melt rheological behavior of starch-based matrix composites reinforced with short sisal fibers. Polym Eng Sci 44(10):1907–1914. https://doi.org/10.1002/pen.20193
Alvarez VA, Kenny JM, Vázquez A (2004b) Creep behavior of biocomposites based on sisal fiber reinforced cellulose derivatives/starch blends. Polym Compos 25(3):280–288. https://doi.org/10.1002/pc.20022
Avérous L, Boquillon N (2004) Biocomposites based on plasticized starch: thermal and mechanical behaviour. Carbohyd Polym 56(2):111–122. https://doi.org/10.1016/j.carbpol.2003.11.015
Baillie C (ed) (2004) Green composites polymer composites
Baillie C (2014) Green composites polymer composites and the environment. Rev Adv Mater Sci 37(1–2):20–28. https://doi.org/10.2991/icmemtc-16.2016.148
Bajpai PK, Singh I, Madaan J (2014) Development and characterization of PLA-based green composites: a review. J Thermoplast Compos Mater 27(1):52–81. https://doi.org/10.1177/0892705712439571
Barkoula NM, Garkhail SK, Peijs T (2010) Biodegradable composites based on flax/polyhydroxybutyrate and its copolymer with hydroxyvalerate. Ind Crops Prod 31(1):34–42. https://doi.org/10.1016/j.indcrop.2009.08.005
Barone JR, Schmidt WF, Liebner CFE (2005) Compounding and molding of polyethylene composites reinforced with keratin feather fiber. Compos Sci Technol 65(3–4):683–692. https://doi.org/10.1016/j.compscitech.2004.09.030
Bodros E et al (2007) Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications? Compos Sci Technol 67(3–4):462–470. https://doi.org/10.1016/j.compscitech.2006.08.024
Chawla KK (ed) (2013) Ceramic matrix composites. Springer Science & Business Media
Cheung HY et al (2009) Natural fibre-reinforced composites for bioengineering and environmental engineering applications. Compos B Eng 40(7):655–663. https://doi.org/10.1016/j.compositesb.2009.04.014 Elsevier Ltd.
Composite Matrix Materials (no date) Available at https://www.azom.com/article.aspx?ArticleID=9814. Accessed 16 May 2018
Corbière-Nicollier T et al (2001) Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics. Resour Conserv Recycl 33(4):267–287. https://doi.org/10.1016/S0921-3449(01)00089-1
Dicker MPM et al (2014) Green composites: a review of material attributes and complementary applications. Compos A Appl Sci Manuf 56:280–289. https://doi.org/10.1016/j.compositesa.2013.10.014
Dittenber DB, Gangarao HVS (2012) Critical review of recent publications on use of natural composites in infrastructure. Compos A Appl Sci Manuf 43(8):1419–1429. https://doi.org/10.1016/j.compositesa.2011.11.019
Dufresne A, Vignon MR (1998) Improvement of starch film performances using cellulose microfibrils. Macromolecules 31(8):2693–2696. https://doi.org/10.1021/ma971532b
Environmental Impact of the Processes (2017) Available at https://www.jernkontoret.se/en/the-steel-industry/production-utilisation-recycling/environmental-impact-of-the-processes/. Accessed 21 May 2018
Eriksen M et al (2014) Plastic pollution in the world’s oceans: more than 5 trillion plastic pieces weighing over 250,000 tons afloat at sea. PLoS ONE 9(12):1–15. https://doi.org/10.1371/journal.pone.0111913
FAO (2009) How to feed the world in 2050, insights from an expert meeting at FAO. https://doi.org/10.1111/j.1728-4457.2009.00312.x
Gadhave RV, Mahanwar PA, Gadekar PT (2017) Bio-renewable sources for synthesis of eco-friendly polyurethane adhesives—review. Open J Polym Chem 07(04):57–75. https://doi.org/10.4236/ojpchem.2017.74005
Gruber P, O’Brien M (2005) Polylactides “NatureWorks® PLA”. Biopolymers Online. https://doi.org/10.1002/3527600035.bpol4008
Hills P (2011) Recent advances in green composites. 425(2010):107–166
Hinestroza J, Netravali AN (2014) Cellulose based composites: new green nanomaterials. https://doi.org/10.1002/9783527649440
Hong CK, Wool RF (2005) Development of a bio-based composite material from soybean oil and keratin fibers. J Appl Polym Sci 95(6):1524–1538. https://doi.org/10.1002/app.21044
Jose JP et al (2012) Advances in polymer composites: macro- and microcomposites—state of the art, new challenges, and opportunities. Polym Compos 1:1–16. https://doi.org/10.1002/9783527645213
Kandpal BC, Chaurasia R, Khurana V (2015) Recent advances in green composites—a review. Glob J Pharmacol 9(3):267–271. https://doi.org/10.5829/idosi.gjp.2015.9.3.94289
Keller A et al (2000) Degradation kinetics of biodegradable fiber composites. J Polym Environ 8(2):91–96. https://doi.org/10.1023/A:1011574021257
Kim NK, Bhattacharyya D, Lin RJT (2013) Multi-functional properties of wool fibre composites. Adv Mater Res. https://doi.org/10.4028/www.scientific.net/AMR.747.8
Koronis G, Silva A, Fontul M (2013) Green composites: a review of adequate materials for automotive applications. Compos B Eng 44(1):120–127. https://doi.org/10.1016/j.compositesb.2012.07.004 Elsevier Ltd.
La Mantia FP, Morreale M (2011) Green composites: a brief review. Compos A Appl Sci Manuf 42(6):579–588. https://doi.org/10.1016/j.compositesa.2011.01.017 Elsevier Ltd.
La Mantia FP et al (2008) Effect of the processing on the properties of biopolymer based composites filled with wood flour. Int J Mater Form 1(SUPPL. 1):759–762. https://doi.org/10.1007/s12289-008-0286-7
Le Digabel F et al (2004) Properties of thermoplastic composites based on wheat-straw lignocellulosic fillers. J Appl Polym Sci 93(1):428–436. https://doi.org/10.1002/app.20426
Lee N et al (2009) Characterization of castor oil/polycaprolactone polyurethane biocomposites reinforced with hemp fibers. Fibers Polym 10(2):154–160. https://doi.org/10.1007/s12221-009-0154-1
Lodha P, Netravali AN (2002) Characterization of interfacial and mechanical properties of “green” composites with soy protein isolate and ramie fiber. J Mater Sci 37(17):3657–3665. https://doi.org/10.1023/A:1016557124372
Mallick PK (ed) (1997) Composites engineering handbook. CRC Press, New york
Melo BN et al (2008) Eco-composites of polyurethane and Luffa aegyptiaca modified by mercerisation and benzylation. Polym Polym Compos 16(4):249–256
Mohanty AK et al (2004) Effect of process engineering on the performance of natural fiber reinforced cellulose acetate biocomposites. Compos A Appl Sci Manuf 363–370. https://doi.org/10.1016/j.compositesa.2003.09.015
Mohanty AK, Misra M, Hinrichsen G (2000) Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Engi 276–277:1–24. https://doi.org/10.1002/(sici)1439-2054(20000301)276:1<1::aid-mame1>3.0.co;2-w
Mohanty AK, Misra M, Drzal LT (2001) Surface modifications of natural fibers and performance of the resulting biocomposites: an overview. Compos Interfaces 8(5):313–343. https://doi.org/10.1163/156855401753255422
Mohanty AK, Misra M, Drzal LT (2002) Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world. J Polym Environ 10(1–2):19–26. https://doi.org/10.1023/A:1021013921916
Netravali AN, Chabba S (2003) Composites get greener. Mater Today 6(4):22–29. https://doi.org/10.1016/S1369-7021(03)00427-9
Norgate TE, Jahanshahi S, Rankin WJ (2007) Assessing the environmental impact of metal production processes. J Clean Prod 15(8–9):838–848. https://doi.org/10.1016/j.jclepro.2006.06.018
Oksman K, Skrifvars M, Selin JF (2003) Natural fibres as reinforcement in polylactic acid (PLA) composites. Compos Sci Technol 63(9):1317–1324. https://doi.org/10.1016/S0266-3538(03)00103-9
Ratwani MM (2010) Composite materials and sandwich structures—a primer. Rto-En-Avt 156:1–16
Rohatgi PK (1993) Metal-matrix composites. Defence Sci J 43(4):323–349
Sands JM et al (2001) Environmental issues for polymer matrix composites and structural adhesives. Clean Prod Process 2(4):0228–0235. https://doi.org/10.1007/s100980000089
Satyanarayana KG, Arizaga GGC, Wypych F (2009) Biodegradable composites based on lignocellulosic fibers—an overview. Prog Polym Sci (Oxford) 34(9):982–1021. https://doi.org/10.1016/j.progpolymsci.2008.12.002
Shao Z, Vollrath F (2002) Surprising strength of silkworm silk. Nature 418(6899):741. https://doi.org/10.1038/418741a
Sharma R et al (2013) The impact of incinerators on human health and environment. Rev Environ Health 67–72. https://doi.org/10.1515/reveh-2012-0035
Smith GG, Barker RH (1995) Life cycle analysis of a polyester garment. Resour Conserv Recycl 14(3–4):233–249. https://doi.org/10.1016/0921-3449(95)00019-F
Stamboulis A et al (2000) Environmental durability of flax fibres and their composites based on polypropylene matrix. Appl Compos Mater 7(5–6):273–294. https://doi.org/10.1023/A:1026581922221
Surip SN et al (2016) Biodegradation properties of poly (lactic) acid reinforced by kenaf fibers. Acta Phys Pol A 835–837. https://doi.org/10.12693/aphyspola.129.835
Szczesna-Antczak M, Kazimierczak J, Antczak T (2012) Nanotechnology—methods of manufacturing cellulose nanofibres. Fibres Text Eastern Europe 91(2):8–12
Taya M, Arsenault RJ (2000) Metal matrix composites. Thermomechanical behavior. https://doi.org/10.1016/b978-0-08-031616-1.50001-7
Van de Weyenberg I et al (2006) Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment. Compos A Appl Sci Manuf 37(9):1368–1376. https://doi.org/10.1016/j.compositesa.2005.08.016
Wollerdorfer M, Bader H (1998) Influence of natural fibres on the mechanical properties of biodegradable polymers. Ind Crops Prod 8(2):105–112. https://doi.org/10.1016/S0926-6690(97)10015-2
Woodford C (2017) Cermets. Available at https://www.explainthatstuff.com/cermets.html. Accessed 25 May 2018
Ye L et al (2017) Life cycle assessment of polyvinyl chloride production and its recyclability in China. J Clean Prod 142:2965–2972. https://doi.org/10.1016/j.jclepro.2016.10.171 Elsevier Ltd.
Yu PHF et al (1999) Transformation of industrial food wastes into polyhydroxyalkanoates. Water Sci Technol 365–370. https://doi.org/10.1016/s0273-1223(99)00402-3
Yu J (2001) Production of PHA from starchy wastewater via organic acids. J Biotechnol 86(2):105–112. https://doi.org/10.1016/S0168-1656(00)00405-3
Zini E et al (2004) Biodegradable polyesters reinforced with surface-modified vegetable fibers. Macromol Biosci 286–295. https://doi.org/10.1002/mabi.200300120
Zini E, Scandola M (2011) Green composites: an overview. Polym Compos. https://doi.org/10.1002/pc.21224
Zini E et al (2007) Bio-composite of bacterial poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) reinforced with vegetable fibers. Compos Sci Technol 67(10):2085–2094. https://doi.org/10.1016/j.compscitech.2006.11.015
Zou Y, Xu H, Yang Y (2010) Lightweight polypropylene composites reinforced by long switchgrass stems. J Polym Environ 18(4):464–473. https://doi.org/10.1007/s10924-010-0165-4
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Mhatre, A.M., Raja, A.S.M., Saxena, S., Patil, P.G. (2019). Environmentally Benign and Sustainable Green Composites: Current Developments and Challenges. In: Muthu, S. (eds) Green Composites. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-13-1969-3_3
Download citation
DOI: https://doi.org/10.1007/978-981-13-1969-3_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-1968-6
Online ISBN: 978-981-13-1969-3
eBook Packages: EngineeringEngineering (R0)