Abstract
As one of the fundamental joints, adhesive joint can be applied to hybrid joints for the complex structures. To improve the material utilization of adhesive, the stress distribution of dual-zone adhesive-bonded joints was studied and optimized. Considering the elastic deformation of adhesives, the analytical models for shear stress of single- and dual-zone adhesive joint were deduced. The analytical model of single-zone adhesive joint for steel/Al was validated by FEA model and test data. Based on the analytical model, the shear stress distribution of dual-zone adhesive-bonded steel/Al joints was optimized. Results of optimization show that the stress level in dual-zone adhesive is higher than the traditional adhesive joint structure, which means the mechanical potential of adhesive can be realized better. The adhesive usage amount in dual-zone structure can be reduced 11.7% by keeping the overlapping length constant and the strength of joints not decreasing. In addition, the adhesive length close to lower stiffness material is longer than the other side which can remedy the defect of stiffness imbalance of adherends.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhao B, Li ZH (2009) Elastic stress analysis of single-lap adhesive-bonded joints. Chin J Appl Mech, 608–613
Sun DX, You M (2008) Research on the mechanical behavior of coaxially bonded single lap joint. China Elastometrics, 18–21
Goland M, Reissner E (1944) The stresses in cemented joints. J Appl Mech ASME 11(1):A17–A27
Ojalvo IU (1985) Optimization of bonded joints. AIAA J 23(10):1578–1582
Yue P, Zhao B (2008) Stress analysis and adhesive shear stress optimization for mixed-modulus bonded single-lap joints. Beijing Adhesion Society, Beijing, pp 901–915
Adams RD, Peppiatt NA (1973) Effect of poisson’ s ratio strains in adherends on stresses of an idealized lap joints. J Strain Anal 8(2):134–139
Wang J, Zhang C (2009) Three parameter elastic foundation model for analysis of adhesively bonded joints. Int J Adhes Adhes 29:495–502
Li L (2011) Research on static strength analysis and strength prediction of adhesively bonded single lap joint for automotive. Jilin University, Jilin, p 75
Qin ZX (2015) Research on the performance of clinch-bonded hybrid joints between steel and aluminum alloy sheets and its application on auto body. South China University of Technology, Guangdong, p 28
Acknowledgements
This project is supported by National Natural Science Foundation of China (51675044) and National Key Research and Development Plan (2017YFB0103704).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Chen, X., Fu, D., Guo, Z., Li, M. (2020). Shear Stress Analysis and Optimization of Dual-Zone Adhesive-Bonded Steel/Al Joints. In: (China SAE), C. (eds) Proceedings of China SAE Congress 2018: Selected Papers. SAE-China 2018. Lecture Notes in Electrical Engineering, vol 574. Springer, Singapore. https://doi.org/10.1007/978-981-13-9718-9_44
Download citation
DOI: https://doi.org/10.1007/978-981-13-9718-9_44
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-9717-2
Online ISBN: 978-981-13-9718-9
eBook Packages: EngineeringEngineering (R0)