Abstract
The microhardness (μH) and surface roughness (Ra) constitute the surface integrity aspect, which affects the quality and service life of a product. This paper aimed to analyse the effect of cutting parameters, such as cutting speed, feed and depth of cut on microhardness (μH) in hard turning of AISI 52100 steel of 58 HRC, with multilayer coated carbide tool insert under dry environment. Response surface methodology based on central composite design (CCD) was employed to design the experiment and develop the mathematical models for microhardness (μH). The analysis of variance (ANOVA) was used to explore the main and interaction effect of cutting parameters on microhardness (μH). The (ANOVA) results revealed that the microhardness of the machined surface is significantly influenced by the cutting speed, feed rate and depth. A quadratic regression model in terms of cutting speed, feed and depth of cut for microhardness (μH) was developed with 95% confidence level. The adequacy and validity of the developed model were checked on the basis of P-value, F-value and R2-value.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tönshoff HK, Arendt C, Ben Amor R (2000) Cutting of hardened steel, CIRP Ann Manuf Technol 49(2):547–566
König W, Hochschule T, Komanduri R, Schenectady D, Tönshoff HK (1984) Machining of hard materials. CIRP Ann 33(2):417–427
Guo YB, Li W, Jawahir IS (2009) Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys: a state-of-art research review and analysis. Mach Sci Technol 13:437–470
Kundrak J, Mamalis AG, Gyani K, Bana V (2011) Surface layer microhardness changes with high-speed turning of hardened steels. Int J Adv Manuf Technol 53:105–112
Saini S, Ahuja IS, Sharma VS (2012) Residual stresses, surface roughness, and tool wear in hard turning: a comprehensive review. Mater Manufact Proc 27:583–598
Goel P, Khan ZA, Siddiquee AN, Kamaruddin S, Gupta RK (2012) Influence of slab milling process parameters on surface integrity of HSLA: a multi-performance characteristics optimization. Int J Adv Manuf Technol 61:859–871
Liu WW, Li XY, Wan XS, Li F, Shan CW (2013) The effects of turning parameters on machining surface integrity in high speed turning Inconel 718. Mech Sci Technol Aerosp Eng 32(8)
Ndaliman MB, Khan AA, Ali MY (2013) Influence of electrical discharge machining process parameters on surface micro-hardness of titanium alloy. Proc Inst Mech Eng Part B: J Eng Manuf 227(3):460–464
Cai X, Qin S, Li J, An Q, Chen M (2014) Experimental investigation on surface integrity of end milling nickel-based alloy-Inconel 718. Mach Sci Technol 18(1):31–46
Rafai NH, Lajis MA, Hosni NAJ (2014) The effect of machining parameters on surface integrity when milling hardened steel. Appl Mech Mater 660:70–73
Bhopale NN, Joshi SS, Pawade RS (2015) Experimental investigation into the effect of ball end milling parameters on surface integrity of Inconel 718. J Mater Eng Perform 24(2):986–998. https://doi.org/10.1007/s11665-014-1323-y
Hassanpour H, Sadeghi MH, Rasti A, Shajari S (2016) Investigation of surface roughness, microhardness and white layer thickness in hard milling of AISI 4340 using minimum quantity lubrication. J Clean Prod 120:124–134
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Mane, S., Kumar, S. (2020). Effect of Cutting Parameters on Microhardness in Turning of AISI 52100 Hardened Alloy Steel with Multilayer Coated Carbide Insert. In: Vasudevan, H., Kottur, V., Raina, A. (eds) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4485-9_19
Download citation
DOI: https://doi.org/10.1007/978-981-15-4485-9_19
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-4484-2
Online ISBN: 978-981-15-4485-9
eBook Packages: EngineeringEngineering (R0)