Abstract
Renovation of multi-apartment buildings and district heating distribution system is aimed to reduce the final energy consumption. Directive 2012/27/EU of the EU on energy efficiency it is defined that as from 2014 3% of the public buildings owned and occupied by its central government should be renovated each year to meet at least the minimum energy performance requirements. Moreover, Directive 2010/31/EU and national regulation require the application of minimum requirements to the energy performance of existing and new buildings as well as increasing the number of nearly zero-energy buildings, which will have a significant impact on the consumption of thermal energy. In order to predict the influence of the future energy efficiency measures on the efficiency of the existing DH systems, District Heating Planning Tool was used for evaluation of the particular DH system. At the output, the tool provides twelve efficiency and balance indicators with the recommended permissible limits for the evaluation of DH system development scenarios. The tool validation is based on the results of comprehensive research of already renovated buildings. As a result of complex renovation decrease in thermal energy consumption can be achieved from 35 to 50% (average 42.3%). Consistent simulations of the proposed future development scenarios for a particular DH system with different building renovation rates of 3, 5 and 7% have shown a natural reduction in thermal energy consumption in a 15-year perspective by 13.5, 22.5 and 30%. Simulation results of the last three scenarios, which consider the use of renewable energy sources, have shown that CO2 emissions have been considerably reduced by about 40% compared to the actual state and the share of biomass has reached 47% of the total fuel consumption for thermal energy production.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cheng, V., Steemers, K.: Modelling domestic energy consumption at district scale: a tool to support national and local energy policies. Environ. Model. Softw. (2011). https://doi.org/10.1016/j.envsoft.2011.04.005
Leichenko, R.: Climate change and urban resilience. Curr. Opin. Environ. Sustain. (2011). https://doi.org/10.1016/j.cosust.2010.12.014
Collier, M.J., et al.: Transitioning to resilience and sustainability in urban communities. Cities (2013). https://doi.org/10.1016/j.cities.2013.03.010
Sameti, M., Haghighat, F.: Optimization approaches in district heating and cooling thermal network. Energy Build. (2017). https://doi.org/10.1016/j.enbuild.2017.01.062
Fang, T., Lahdelma: Genetic optimization of multi-plant heat production in district heating networks. Appl. Energy (2015). https://doi.org/10.1016/j.apenergy.2015.09.027
Duquette, J., Rowe, A., Wild, P.: Thermal performance of a steady state physical pipe model for simulating district heating grids with variable flow. Appl. Energy (2016). https://doi.org/10.1016/j.apenergy.2016.06.092
Heller, A.J.: Heat-load modelling for large systems. Appl. Energy (2002). https://doi.org/10.1016/S0306-2619(02)00020-X
Gao, L., et al.: Technologies in smart district heating system. Energy Procedia (2017). https://doi.org/10.1016/j.egypro.2017.12.571
Sayegh, M.A., Jadwiszczak, P., Axcell, B.P., Niemierka, E., Bryś, K., Jouhara, H.: Heat pump placement, connection and operational modes in European district heating. Energy Build. (2018). https://doi.org/10.1016/j.enbuild.2018.02.006
Borodinecs, A., Zemitis, J., Sorokins, J., Baranova, D.V., Sovetnikov, D.O.: Renovation need for apartment buildings in Latvia. Mag. Civ. Eng. (2016). https://doi.org/10.5862/MCE.68.6
Aëšberg, M., Widén, J.: Development, validation and application of a fixed district heating model structure that requires small amounts of input data. Energy Convers. Manag. (2013). https://doi.org/10.1016/j.enconman.2013.05.032
Ziemele, J., Gravelsins, A., Blumberga, A., Vigants, G., Blumberga, D.: System dynamics model analysis of pathway to 4th generation district heating in Latvia. Energy (2016). https://doi.org/10.1016/j.energy.2015.11.073
Woods, P., Overgaard, J.: Historical development of district heating and characteristics of a modern district heating system. In: Advanced District Heating and Cooling (DHC) Systems (2015)
Kim, S., Kim, H.: A new metric of absolute percentage error for intermittent demand forecasts. Int. J. Forecast. (2016). https://doi.org/10.1016/j.ijforecast.2015.12.003
U.S. Energy Information Administration: The electric power monthly. Internet (2016). https://www.eia.gov/electricity/monthly/pdf/epm.pdf
Åberg, M., Widén, J., Henning, D.: Sensitivity of district heating system operation to heat demand reductions and electricity price variations: a Swedish example. Energy (2012). https://doi.org/10.1016/j.energy.2012.02.034
Acknowledgements
This work has been supported by the European Regional Development Fund within the Activity 1.1.1.2 “Postdoctoral Research Aid” of the Specific Aid Objective 1.1.1 “To increase the research and innovative capacity of scientific institutions of Latvia and the ability to attract external financing, investing in human resources and infrastructure” of the Operational Programme “Growth and Employment” (1.1.1.2/VIAA/2/18/344).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zajacs, A., Borodiņecs, A., Bogdanovičs, R. (2020). Assessment of the Efficiency and Reliability of the District Heating Systems Within Different Development Scenarios. In: Littlewood, J., Howlett, R., Capozzoli, A., Jain, L. (eds) Sustainability in Energy and Buildings. Smart Innovation, Systems and Technologies, vol 163. Springer, Singapore. https://doi.org/10.1007/978-981-32-9868-2_32
Download citation
DOI: https://doi.org/10.1007/978-981-32-9868-2_32
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9867-5
Online ISBN: 978-981-32-9868-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)