1. Phase equilibria investigations on the aluminum-rich part of the binary system Ti-Al

   • J. Braun
   • M. Ellner

   OriginalPaper Pages: 1037 - 1047

2. Inclusions in commercial low and medium carbon ferromanganese

   • Thobias Sjöqvist
   • Pär Jönsson
   • Öystein Grong

   OriginalPaper Pages: 1049 - 1056

3. Dimensional anisotropy in 18 pct Ni maraging steel

   • M. Farooque
   • S. Qaisar
   • A. Ul Haq

   OriginalPaper Pages: 1057 - 1061

4. Influence of zirconium and copper on the early stages of aging in Al-Zn-Mg alloys

   • X. J. Jiang
   • B. Noble
   • J. Tafto

   OriginalPaper Pages: 1063 - 1073

5. Discontinuous precipitation at [001] twist boundaries in Cu-0.75 wt pct Be alloy bicrystals

   • R. Monzen
   • K. Kita
   • H. Shigehara

   OriginalPaper Pages: 1075 - 1079

6. Mechanism of detrimental effects of carbon content on cleavage fracture toughness of low-alloy steel

   • J. H. Chen
   • G. Z. Wang
   • S. H. Hu

   OriginalPaper Pages: 1081 - 1091

7. The evolution of grain boundary character during superplastic deformation of an Al-6 pct Cu-0.4 pct Zr alloy

   • M. Eddahbi
   • O. A. Ruano
   • T. R. McNelley

   OriginalPaper Pages: 1093 - 1102

8. Creep-rupture behavior of a directionally solidified nickel-base superalloy

   • J. T. Guo
   • C. Yuan
   • M. Maldini

   OriginalPaper Pages: 1103 - 1110

9. Correlation of microstructure and surface roughness of disc drums fabricated by hot forging of an AISI 430F stainless steel

   • Dong-Kuk Kim
   • Dong-Geon Lee
   • Sunghak Lee

   OriginalPaper Pages: 1111 - 1118

10. Tensile ductility of several commercial aluminum alloys at elevated temperatures

    • Eric M. Taleff
    • Peter J. Nevland
    • Paul E. Krajewski

    OriginalPaper Pages: 1119 - 1130

11. An experimental investigation of fretting fatigue in Ti-6Al-4V: the role of contact conditions and microstructure

    • T. A. Venkatesh
    • B. P. Conner
    • C. S. Lee

    OriginalPaper Pages: 1131 - 1146

12. Dependency of fracture toughness on the inhomogeneity of coarse TiN particle distribution in a low alloy steel

    • L. P. Zhang
    • C. L. Davis
    • M. Strangwood

    OriginalPaper Pages: 1147 - 1155

13. Fracture toughness of alloy 600 and an EN82H weld in air and water

    • W. J. Mills
    • C. M. Brown

    OriginalPaper Pages: 1161 - 1174

14. Spatially resolved X-ray diffraction mapping of phase transformations in the heat-affected zone of carbon-manganese steel arc welds

    • John W. Elmer
    • Joe Wong
    • Thorsten Ressler

    OriginalPaper Pages: 1175 - 1187

15. A process model for friction stir welding of age hardening aluminum alloys

    • Ø. Frigaard
    • Ø. Grong
    • O. T. Midling

    OriginalPaper Pages: 1189 - 1200

16. Hardness-depth profiling on nanometer scale

    • M. Kunert
    • B. Baretzky
    • S. P. Baker

    OriginalPaper Pages: 1201 - 1209

17. Microstructural size effects in high-strength high-conductivity Cu-Cr-Nb alloys

    • Ken R. Anderson
    • Joanna R. Groza

    OriginalPaper Pages: 1211 - 1224

18. Structures and residual stresses of Cr fibers in Cu-15Cr in-situ composites

    • Shoujin Sun

    OriginalPaper Pages: 1225 - 1232

19. Ti₅Si₃ whisker in-situ reinforced TiAl alloys

    • Fu-Sheng Sun
    • Chun-Xiao Cao
    • Yong-Tai Lee

    OriginalPaper Pages: 1233 - 1244

20. On strengthening mechanisms in commercial Nb-Ti hot strip steels

    • S. S. Campos
    • H. -J. Kestenbach
    • E. V. Morales

    Communications Pages: 1245 - 1248

21. Particle formation in the rapidly solidified zone of alloy 600 surface melted by a CO₂ laser beam

    • Yun Soo Lim
    • Joung Soo Kim
    • Hyuk Sang Kwon

    Communications Pages: 1248 - 1251

22. Effect of growth velocity on the growth temperature of the Al-Al_xFe eutectic in Al-2.85Fe-0.12V alloy

    • Y. Wang
    • H. Jones

    Communications Pages: 1251 - 1253