1. Modular design applied to beverage-container injection molds

   • Ming-Shyan Huang
   • Ming-Kai Hsu

   ORIGINAL ARTICLE 25 June 2010 Pages: 1 - 10

2. Dynamic cellular manufacturing systems design—a comprehensive model

   • Lokesh Kumar Saxena
   • Promod Kumar Jain

   ORIGINAL ARTICLE 05 August 2010 Pages: 11 - 34

3. Production control in a failure-prone manufacturing network using discrete event simulation and automated response surface methodology

   • Seyed Mojtaba Sajadi
   • Mir Mehdi Seyed Esfahani
   • Kenneth Sörensen

   Original Article 21 July 2010 Pages: 35 - 46

4. Simulation of variational compliant assemblies with shape errors based on morphing mesh approach

   • Pasquale Franciosa
   • Salvatore Gerbino
   • Stanislao Patalano

   ORIGINAL ARTICLE 23 July 2010 Pages: 47 - 61

5. Subdivision surface modeling for spiral bevel gear manufacturing

   • Yuan Xing
   • Shengfeng Qin
   • Kai Cheng

   ORIGINAL ARTICLE 10 July 2010 Pages: 63 - 70

6. An adaptive fuzzy control system to maximize rough turning productivity and avoid the onset of instability

   • Juho Ratava
   • Mikko Rikkonen
   • Inga Sihvo

   ORIGINAL ARTICLE 05 September 2010 Pages: 71 - 79

7. Study on finish-turning of NiCr20TiAl nickel-based alloy using Al₂O₃/TiN-coated carbide tools

   • Bin Zou
   • Ming Chen
   • Shasha Li

   ORIGINAL ARTICLE Open access 14 July 2010 Pages: 81 - 92

8. Regulation of spindle position by magnetic actuator array

   • Nan-Chyuan Tsai
   • Rong-Mao Lee

   ORIGINAL ARTICLE 15 July 2010 Pages: 93 - 104

9. Surface layer microhardness changes with high-speed turning of hardened steels

   • J. Kundrak
   • A. G. Mamalis
   • V. Bana

   ORIGINAL ARTICLE 21 July 2010 Pages: 105 - 112

10. Time modeling in high-speed machining of mold pocket

    • Moncef Hbaieb
    • Radhouane Othmani
    • Wassila Bouzid

    ORIGINAL ARTICLE 27 July 2010 Pages: 113 - 120

11. A new tool wear estimation method based on shape mapping in the milling process

    • Chen Zhang
    • Xihui Liu
    • Laishui Zhou

    Original Article 10 July 2010 Pages: 121 - 130

12. Experimental study on multi-stage deep drawing for rectangular cup with high aspect ratio

    • Beom-Soo Kang
    • Tae-Wan Ku

    ORIGINAL ARTICLE 04 July 2010 Pages: 131 - 143

13. An investigation on multistage bending of blank sheet into cylindrical tube by experiment and numerical simulation

    • Mingsheng Xia
    • Qi Yan
    • Jianqiang Xie

    ORIGINAL ARTICLE 21 July 2010 Pages: 145 - 155

14. Numerical simulation and experimental validation of a ductile damage model for DIN 1623 St14 steel

    • Farhad Haji Aboutalebi
    • Mahmoud Farzin
    • Mehrdad Poursina

    ORIGINAL ARTICLE 24 July 2010 Pages: 157 - 165

15. Study on the nano-powder-mixed sinking and milling micro-EDM of WC-Co

    • Muhammad Pervej Jahan
    • Mustafizur Rahman
    • Yoke San Wong

    ORIGINAL ARTICLE 22 July 2010 Pages: 167 - 180

16. Performance analysis of wire electrochemical turning process—RSM approach

    • Taha Ali El-Taweel
    • S. A. Gouda

    Original Article 09 July 2010 Pages: 181 - 190

17. An integrated framework of statistical process control and design of experiments for optimizing wire electrochemical turning process

    • Salah Haridy
    • Sherif Araby Gouda
    • Zhang Wu

    ORIGINAL ARTICLE 21 July 2010 Pages: 191 - 207

18. Process planning and electrode wear compensation for 3D micro-EDM

    • Mu-Tian Yan
    • Shr-Shiang Lin

    ORIGINAL ARTICLE 15 July 2010 Pages: 209 - 219

19. A statistical approach to the optimization of a laser-assisted micromachining process

    • Ramesh K. Singh
    • V. Roshan Joseph
    • Shreyes N. Melkote

    ORIGINAL ARTICLE 13 July 2010 Pages: 221 - 230

20. Additive manufacturing of metallic cellular materials via three-dimensional printing

    • Christopher B. Williams
    • Joe K. Cochran
    • David W. Rosen

    ORIGINAL ARTICLE 17 July 2010 Pages: 231 - 239

21. Calculation of the virtual pitch thread diameter using the cloud of points from CMM

    • Igor Alexeevich Shchurov

    ORIGINAL ARTICLE 11 July 2010 Pages: 241 - 245

22. Numerical simulation for abrasive water jet machining based on ALE algorithm

    • Gong Wenjun
    • Wang Jianming
    • Gao Na

    ORIGINAL ARTICLE 21 July 2010 Pages: 247 - 253

23. Direct slicing of cloud data with guaranteed topology for rapid prototyping

    • Yanjie Qiu
    • Xionghui Zhou
    • Xiaoping Qian

    ORIGINAL ARTICLE 16 July 2010 Pages: 255 - 265

24. Automated detection of surface defects on power transmission belts

    • Boštjan Perdan
    • Drago Bračun
    • Janez Diaci

    ORIGINAL ARTICLE 27 July 2010 Pages: 267 - 273

25. Effects of layer thickness and binder saturation level parameters on 3D printing process

    • Mohammad Vaezi
    • Chee Kai Chua

    ORIGINAL ARTICLE 14 July 2010 Pages: 275 - 284

26. Experimental implementation of Taylor series expansion error compensation on a bi-axial CNC machine

    • Xue-Cheng Xi
    • Aun-Neow Poo
    • Feng Huo

    Original article 31 July 2010 Pages: 285 - 299

27. Three-dimensional finite element analysis of multi-stage hot forming of railway wheels

    • Tapas Gangopadhyay
    • Raj Kumar Ohdar
    • Indrajit Basak

    ORIGINAL ARTICLE 09 July 2010 Pages: 301 - 312

28. FEM mesh-dependence in cutting process simulations

    • Ravindra Ambati
    • Huang Yuan

    Original Article 15 July 2010 Pages: 313 - 323

29. Constant cusp toolpath generation in configuration space based on offset curves

    • Steffen Hauth
    • Claus Richterich
    • Lars Linsen

    Original Article 14 July 2010 Pages: 325 - 338

30. Simultaneous scheduling of machines and vehicles in an FMS environment with alternative routing

    • M. V. Satish Kumar
    • Ranga Janardhana
    • C. S. P. Rao

    ORIGINAL ARTICLE 11 August 2010 Pages: 339 - 351

31. Minimization of total tardiness on unrelated parallel machines with sequence- and machine-dependent setup times under due date constraints

    • Shih-Wei Lin
    • Chung-Cheng Lu
    • Kuo-Ching Ying

    ORIGINAL ARTICLE 15 July 2010 Pages: 353 - 361

32. A mathematical model and ant colony algorithm for multi-manned assembly line balancing problem

    • Parviz Fattahi
    • Abdolreza Roshani
    • Abdolhassan Roshani

    ORIGINAL ARTICLE 20 July 2010 Pages: 363 - 378

33. A special variable sample size and sampling interval Hotelling’s T ² chart

    • Shashibhushan B. Mahadik
    • Digambar T. Shirke

    ORIGINAL ARTICLE 24 July 2010 Pages: 379 - 384

34. Information requirements analysis for holonic manufacturing systems in a virtual environment

    • Hamed Farahani Manesh
    • Dirk Schaefer
    • Majid Hashemipour

    ORIGINAL ARTICLE 13 July 2010 Pages: 385 - 398

35. PDM and ERP integration methodology using digital manufacturing to support global manufacturing

    • Changho Lee
    • Choon Seong Leem
    • Inhyuck Hwang

    ORIGINAL ARTICLE 18 July 2010 Pages: 399 - 409

36. Role of information technology in business revolution

    • Abdollah Arasteh
    • Alireza Aliahmadi
    • Mohammad Omran Mohammadpour

    ORIGINAL ARTICLE 31 July 2010 Pages: 411 - 420