Skip to main content

Reservoir Engineering in Geothermal Fields

  • Living reference work entry
  • First Online:
Encyclopedia of Sustainability Science and Technology

Glossary

Aquifer:

A geological formation (or formations) which contains water or geothermal fluid and will allow fluid movement.

Baseline:

Data set acquired before exploitation begins, against which any future measurements are compared.

Deep liquid zone:

Region of single-phase liquid conditions below a two-phase (liquid and vapor) zone.

Deep liquid level:

Boundary between the two-phase and deep liquid zones.

Energy Conversion technology:

Term that refers to the thermodynamic cycle used to convert the heat energy from geothermal fluids into electricity, there are several of these technologies. Binary in which the heat of the geothermal fluids is transferred to a low-vaporization-temperature fluid (usually isopentane, ammonia, or a combination of water-ammonia) that is the working fluid driving the turbine generator. The heat source for the binary technology could be the separated geothermal brine or the steam or both exchanging energy in separated exchangers. When the steam is used...

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Institutional subscriptions

Bibliography

Primary Literature

  1. Axelsson G, Björnsson G, Montalvo F (2005) Quantitative interpretation of tracer test data. In: Proceedings of the world geothermal congress 2005, Antalya

    Google Scholar 

  2. Tokita H, Haruguchi K, Kamenosono H (2000) Maintaining the rated power output of the Hatchobaru geothermal field through an integrated reservoir management. In: Proceedings of world geothermal congress 2000, Kyushu/Tohoku, pp 2263–2268

    Google Scholar 

  3. Lima E, Tokita H, Tsukamoto S (2004) Operation of the Hatchobaru geothermal field based upon a coupled reservoir-well and piping network numerical simulator. In: Proceedings of the KenGen geothermal conference, Nairobi, CD-ROM

    Google Scholar 

  4. Tokita H, Lima E, Itoi R, Akiyoshi M, Senjyu T (2006) Application of coupled numerical reservoir simulation to design a sustainable exploitation of the Hatchobaru geothermal field. In: Proceedings of renewable energy 2006, Makuhari Messe, CD-ROM

    Google Scholar 

  5. Aunzo ZP, Bjornsson G, Bodvarsson GS (1991) Wellbore models GWELL, GWNACL, and HOLA user’s guide. Lawrence Berkeley laboratory Report LBL-31428, DE92 009494, Oct 1991

    Google Scholar 

  6. Gunn C, Freeston D (1991) An integrated steady-state wellbore simulation and analysis package. In: Proceedings of the 13th New Zealand geothermal workshop 1991, Auckland, pp 161–166

    Google Scholar 

  7. Itoi R, Kakihara Y, Fukuda M, Koga A (1988) Numerical simulation of well characteristics coupled with steady radial flow in a geothermal reservoir. In: International symposium on geothermal energy, exploration and development of geothermal resources, Kumamoto and Beppu, pp 201–204

    Google Scholar 

  8. Takahashi M (1988) A wellbore flow model in the presence of CO2 gas. In: Proceedings of the 13th workshop on geothermal reservoir engineering. Stanford University, Stanford, pp 151–157

    Google Scholar 

  9. Tokita H, Itoi R (2004) Development of MULFEWS a multi-feed wellbore simulator. In: Proceedings of 29th workshop on geothermal reservoir engineering, Stanford University, California, CD-ROM

    Google Scholar 

  10. Tokita H, Yahara T, Kitakoga I (1995) Cooling effect and fluid behavior due to reinjected hot water in the Hatchobaru geothermal field, Japan. In: Proceedings of the World Geothermal Congress 1995, vol 3, Florence, pp 1869–1874

    Google Scholar 

  11. Yahara T, Tokita H (2010) Sustainability of the Hatchobaru geothermal field, Japan. Geothermics 39:382–390

    Article  Google Scholar 

  12. Pruess K (1991) TOUGH2: a general-purpose numerical simulator for multiphase fluid and heat flow. Report LBL-29400, UC-251, pp 1–102

    Google Scholar 

  13. Pruess K, Oldenburg C, Moridis G (1999) TOUGH2 user’s guide, version 2.0. Lawrence Berkeley National Laboratory, Berkeley, LBNL-43134

    Google Scholar 

  14. Prichett JW (1995) STAR: a geothermal reservoir simulation system. In: Proceedings of the World geothermal congress 1995, Florence, pp 2959–2963

    Google Scholar 

  15. Antunez E, Morids G, Pruess K (1995) Large-scale three-dimensional geothermal reservoir simulation on small computer system. In: World geothermal congress 1995, vol 4, Florence, pp 2977–2980

    Google Scholar 

  16. Battistelli A, Calore C, Pruess K (1997) The simulator TOUGH2/EWASG for modeling geothermal reservoirs with brines and non-condensable gas. Geothermics 26(4):437–464

    Article  CAS  Google Scholar 

  17. Pruess K, Finsterle S, Moridis G, Oldenburg C, Wu Y (1997) General-purpose reservoir simulators: the TOUGH2 family. Geotherm Resour Council Bull 26:53–57

    Google Scholar 

  18. Kim J, Schwartz FW, Shi J, Xu T (2003) Modeling the coupling between flow and transport developed by chemical reactions and density differences using TOUGHREACT. In: Proceedings of the TOUGH symposium 2003, Berkeley

    Google Scholar 

  19. Sato T, Ohsato K, Shiga T, Sato M, White SP, Kissling WM (2003) A study of reservoir estimation for a deep-seated geothermal reservoir using TOUGH2 and CHEMITOUGH2. In: Proceedings of the TOUGH symposium 2003, Berkeley

    Google Scholar 

  20. Xu T, Sonnenthal E, Spycher N, Pruess K (2003) TOUGHREACT: a new code of the TOUGH family for non-isothermal multiphase reactive geothermal transport in variable saturated geologic media. Lawrence Berkeley National Laboratory, Berkeley, LBNL-52342

    Google Scholar 

  21. Xu T, Sonnenthal E, Spycher N, Pruess K (2003) Using toughreact to model reactive fluid flow and geochemical transport in hydrothermal system. In: GRC 2003 annual meeting, Morelia

    Google Scholar 

  22. Finsterle S, Pruess K, Bullivant DP, O’Sullivan MJ (1997) Application of inverse modeling to geothermal reservoir simulation. In: Proceedings of the 22nd workshop on geothermal reservoir engineering, Stanford University, Stanford

    Google Scholar 

  23. Finsterle S (2007) iTOUGH2 user’s guide. Lawrence Berkeley National Laboratory, Berkeley, CA94720

    Google Scholar 

Books and Reviews

  • Grant MA, Bixley PF (2011) Geothermal reservoir engineering, 2nd edn. Academic, Burlington. 349 pp. ISBN 978-0-12-383880-3

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Enrique Lima .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2017 Springer Science+Business Media LLC

About this entry

Cite this entry

Lima, E., Tokita, H., Hatanaka, H. (2017). Reservoir Engineering in Geothermal Fields. In: Meyers, R. (eds) Encyclopedia of Sustainability Science and Technology. Springer, New York, NY. https://doi.org/10.1007/978-1-4939-2493-6_299-3

Download citation

  • DOI: https://doi.org/10.1007/978-1-4939-2493-6_299-3

  • Received:

  • Accepted:

  • Published:

  • Publisher Name: Springer, New York, NY

  • Print ISBN: 978-1-4939-2493-6

  • Online ISBN: 978-1-4939-2493-6

  • eBook Packages: Springer Reference Earth and Environm. ScienceReference Module Physical and Materials ScienceReference Module Earth and Environmental Sciences

Publish with us

Policies and ethics