Abstract
This chapter starts with the ultraprecision processing technology and then analyzes the route of ultraprecision machine tools’ forward design and the relevant factors based on cutting mechanism, principal components, and processing technology. According to the ultraprecision machine tools in the market, several kinds of conventional ultraprecision machines’ design configurations are introduced, and the design of the ultraprecision aspheric grinding machine is discussed in detail.
References
Bin L (2015) Large-diameter aspheric mirror precision CNC grinding technology. Xi’an Jiaotong University, Xi’an, China
Brinksmeier E, Mutlugünes Y, Klocke F et al (2010) Ultra-precision grinding. CIRP Ann Manuf Technol 59(2):652–671
Chang HC, Wang JJ (2008) A stochastic grinding force model considering random grit distribution. Int J Mach Tools Manuf 48(12–13):1335–1344
Chen X, Rowe WB (1996) Analysis and simulation of the grinding process. Part I: generation of the grinding wheel surface. Int J Mach Tools Manuf 36(8):871–882
Cheng X, Nakamoto K, Sugai M et al (2008) Development of ultra-precision machining system with unique wire EDM tool fabrication system for micro/nano-machining. CIRP Ann Manuf Technol 57(1):415–420
Cheung CF, Lee WB (2000) A multi-spectrum analysis of surface roughness formation in ultra-precision machining. Precis Eng 24(1):77–87
DeBra DB, Hesselink L, Binford T (1990) Ultra precision machining. Stanford University CA Department of Aeronautics and Astronautics, Stanford
Dornfeld D, Lee DE (2008) Machine design for precision manufacturing. Springer US, New York
Dornfeld D, Min S, Takeuchi Y (2006) Recent advances in mechanical micromachining. CIRP Ann Manuf Technol 55(2):745–768
Ferreira PM, Liu CR (1993) A method for estimating and compensating quasistatic errors of machine tools. J Eng Ind 115(1):149–159
Furukawa Y, Moronuki N (1988) Effect of material properties on ultra precise cutting processes. CIRP Ann Manuf Technol 37(1):113–116
Furukawa Y, Miyashita M, Shiozaki S (1971) Vibration analysis and work-rounding mechanism in centerless grinding. Int J Mach Tool Des Res 11(2):145–175
Gao W, Tano M, Araki T, Kiyono S, Park CH (2007) Measurement and compensation of error motions of a diamond turning machine. Precis Eng 31(3):310–316
Gong H, Fang FZ, Hu XT (2010) Kinematic view of tool life in rotary ultrasonic side milling of hard and brittle materials. Int J Mach Tools Manuf 50(3):303–307
Guangxian X, Xiangyun W (2010) Material structure, 2nd edn. Science Press, Beijing
Hitchiner MP, Marinescu ID, Uhlmann E et al (2016) Handbook of machining with grinding wheels. CRC Press, Boca Raton
Huang H, Yin L, Zhou L (2003) High speed grinding of silicon nitride with resin bond diamond wheels. J Mater Process Technol 141(3):329–336
Inasaki I (1987) Grinding of hard and brittle materials. CIRP Ann Manuf Technol 36(2):463–471
Jiang XJ, Whitehouse DJ (2012) Technological shifts in surface metrology. CIRP Ann Manuf Technol 61(2):815–836
Jianpu X (2015) Precision grinding and error compensation technology of aspheric optical components. Xi’an Jiaotong University, Xi’an, China
Khan AW, Wuyi C (2010) Systematic geometric error modeling for workspace volumetric calibration of a 5-axis turbine blade grinding machine. Chin J Aeronaut 23(5):604–615
Kim JD, Kim DS (1995) Theoretical analysis of micro-cutting characteristics in ultra-precision machining. J Mater Process Technol 49(3–4):387–398
Koenigsberger F, Tlusty J (2016) Machine tool structure. Elsevier, Oxford, UK
Komanduri R, Lucca DA, Tani Y (1997) Technological advances in fine abrasive processes. CIRP Ann Manuf Technol 46(2):545–596
Kong L (2010) Modeling of ultra-precision raster milling and characterization of optical freeform surfaces. Hong Kong Polytechnic University, Hong Kong, China
Kuriyagawa T, Saeki M, Syoji K (2002) Electrorheological fluid-assisted ultra-precision polishing for small three-dimensional parts. Precis Eng 26(4):370–380
Leadbeater PB, Clarke M, Wills-Moren WJ, Wilson TJ (1989) A unique machine for grinding large, off-axis optical components: the OAGM 2500. Precis Eng 11(4):191–196
Lee WB, Cheung CF, To S (1999) Materials induced vibration in ultra-precision machining. J Mater Process Technol 89:318–325
Lee WB, Cheung CF, Chiu WM et al (2000) An investigation of residual form error compensation in the ultra-precision machining of aspheric surfaces. J Mater Process Technol 99(1–3):129–134
Mamalis AG, Grabchenko AI, Horváth M, Mészáros I, Paulmier D (2001) Ultraprecision metal removal processing of mirror-surfaces. J Mater Process Technol 108(3):269–277
McKeown P, Corbett J (2004) Ultra precision machine tools//Autonome produktion. Springer, Berlin, pp 313–327
Okafor AC, Ertekin YM (2000) Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics. Int J Mach Tools Manuf 40(8):1199–1213
Oryński F, Pawłowski W (1999) The influence of grinding process on forced vibration damping in headstock of grinding wheel of cylindrical grinder. Int J Mach Tools Manuf 39(2):229–235
Park CH, Song CK, Hwang J et al (2009) Development of an ultra precision machine tool for micromachining on large surfaces. Int J Precis Eng Manuf 10(4):85
Pei ZJ, Billingsley SR, Miura S (1999) Grinding induced subsurface cracks in silicon wafers. Int J Mach Tools Manuf 39(7):1103–1116
Ramesh R, Mannan MA, Poo AN (2000) Error compensation in machine tools – a review: part II: thermal errors. Int J Mach Tools Manuf 40(9):1257–1284
Rowe WB, Morgan MN, Qi HS et al (1993) The effect of deformation on the contact area in grinding. CIRP Ann Manuf Technol 42(1):409–412
Scheiding S, Damm C, Holota W et al (2010) Ultra-precisely manufactured mirror assemblies with well-defined reference structures//Modern Technologies in Space-and Ground-based Telescopes and Instrumentation. Int Soc Opt Photon 7739:773908
Shore P, Luo X, Jin T et al (2005) Grinding mode of the BOX ultra precision free-form grinder. Proc ASPE pp. 1–4
Shore P, Morantz P, Luo X, Tonnellier X, Collins R, Roberts A, MayMiller R, Read R (2005b) Big OptiX ultra precision grinding/measuring system. Proc SPIE 5965:241–248
Somiya (1984) Advanced technical ceramics. Academic, Tokyo
Taniguchi N (1983) Current status in, and future trends of, ultraprecision machining and ultrafine materials processing. CIRP Ann 32(2):573–582
Thompson R (2007) Manufacturing processes for design professionals. Thames & Hudson, New York
Wattanasakulpong N, Prusty BG, Kelly DW et al (2012) Free vibration analysis of layered functionally graded beams with experimental validation. Mater Des (1980–2015) 36:182–190
Xu HK, Jahanmir S, Ives LK (1996) Material removal and damage formation mechanisms in grinding silicon nitride. J Mater Res 11(7):1717–1724
Yang Y, Lin J, Xu S (2012) Surface grinding machine stability characteristics limited prediction. Mech Eng Res 2(2):114
Yuan J, Zhang F, Dai Y et al (2010) Development research of science and technologies in ultra-precision machining field. Jixie Gongcheng Xuebao (Chin J Mech Eng) 46(15):161–177
Zaghbani I, Songmene V (2009) Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis. Int J Mach Tools Manuf 49(12–13):947–957
Zhang GP, Huang YM, Shi WH et al (2003) Predicting dynamic behaviours of a whole machine tool structure based on computer-aided engineering. Int J Mach Tools Manuf 43(7):699–706
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this entry
Cite this entry
Zhao, H., Yang, S. (2019). Structure Design of Precision Machines. In: Yang, S., Jiang, Z. (eds) Precision Machines. Precision Manufacturing. Springer, Singapore. https://doi.org/10.1007/978-981-10-5192-0_2-1
Download citation
DOI: https://doi.org/10.1007/978-981-10-5192-0_2-1
Received:
Accepted:
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-5192-0
Online ISBN: 978-981-10-5192-0
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering